It seems that I didn't install Graphics Adapter properly.
Code:
# ps -ef | grep Xsun
# /usr/openwin/bin/Xsun :0
/dev/fb: No such file or directory
/dev/fb: No such file or directory
Graphics Adapter device /dev/fb is of unknown type
Fatal server error:
InitOutput: Error loading module for /dev/fb
And here is the content of Xerrors:
Code:
# cat /var/dt/Xerrors
/dev/fb: No such file or directory
/dev/fb: No such file or directory
Graphics Adapter device /dev/fb is of unknown type
Fatal server error:
InitOutput: Error loading module for /dev/fb
Tue Sep 25 17:32:04 2007
error (pid 280): Server for display :0 terminated unexpectedly 1
/dev/fb: No such file or directory
/dev/fb: No such file or directory
Graphics Adapter device /dev/fb is of unknown type
Fatal server error:
InitOutput: Error loading module for /dev/fb
Tue Sep 25 17:32:04 2007
error (pid 280): Server for display :0 terminated unexpectedly 1
/dev/fb: No such file or directory
/dev/fb: No such file or directory
Graphics Adapter device /dev/fb is of unknown type
Fatal server error:
InitOutput: Error loading module for /dev/fb
Tue Sep 25 17:32:04 2007
error (pid 280): Server for display :0 terminated unexpectedly 1
/dev/fb: No such file or directory
/dev/fb: No such file or directory
Graphics Adapter device /dev/fb is of unknown type
Fatal server error:
InitOutput: Error loading module for /dev/fb
Tue Sep 25 17:32:04 2007
error (pid 280): Server for display :0 terminated unexpectedly 1
Tue Sep 25 17:32:04 2007
error (pid 280): Server for display :0 can't be started.
What should I do next?
Thanks for your patience.
VN
Can i change the password on the SCO GUI interface login page and if so how?
When I try to login it just goes right back to the login screen. If anyone has any suggestions, please reply. :confused: (3 Replies)
I have 2 queries:
1.how do we monitor failed GUI logins...? I think the /var/adm/loginlog will log
only failed logins happened at /dev/console and virtual terminals..
2.How to use cron scheduler to display a message when a user is working in GUI Terminal window irrespective of in which... (1 Reply)
Hi,
When I installed Ubuntu on my laptop, I had chosen "automatic login" . So i was not asked ofr username and password everytime I switched on. I later wanted to change the settings. So I went to systems-->administration-->login window-->security. There I disabled automatic login and I reboot the... (3 Replies)
I have a Sun Ultra 45 that was working perfectly until i upgraded it to Update 9 with a zfs filesystem. The box is sparc based and has an internal video card. When i boot it up, i receive an X server error and, while checking /var/dt/Xerrors, the following message is displayed
Fatal server... (9 Replies)
Hi all,
I am able to login via putty to a fedora 10 workstation.
But when i try to login via physical screen connected to workstation, it just gives me a blank screen and i cant see any options to enter username and passwd. How do i get the physical GUI to work.
$ who -r
... (4 Replies)
If I login to one of our AIX 6.1 servers using SSH via PuTTY and I issue the who -a or w command I cannot see my session, although if I login via TELNET I can.
Why is this?
SSH:
root#> who
root#> w
08:06PM up 40 days, 27 mins, 0 users, load average: 0.05, 0.12, 0.14
User tty login@ idle... (1 Reply)
Solaris machine is at # prompt not able to login in GUI mode :
I want to login solaris server in GUI mode from # prompt.
---------- Post updated 12-30-11 at 11:36 AM ---------- Previous update was 12-29-11 at 02:23 PM ----------
Hi,
Please send me some guidelines regarding this....
as... (2 Replies)
I am not too new with linux. Since I installed a new version (2011) of Mandriva, I am unable to login via the gui (I'm currently using the live version of the same dvd free with Linux Format mag). I can login from a console as it has picked up the previous version's /home, but when I try to login... (2 Replies)
hii all,
I am unable to login into GUI mode in solaris 10. It is only prompting me to command mode credentials not going further to GUI mode.. Please help..
Thanks & regards,
Bhagi (3 Replies)
Discussion started by: bhargav90
3 Replies
LEARN ABOUT OPENSOLARIS
dev
dev(7FS) File Systems dev(7FS)NAME
dev - Device name file system
DESCRIPTION
The dev filesystem manages the name spaces of devices under the Solaris operating environment. The global zone's instance of the dev
filesystem is mounted during boot on /dev.
A subdirectory under /dev may have unique operational semantics. Most of the common device names under /dev are created automatically by
devfsadm(1M). Others, such as /dev/pts, are dynamic and reflect the operational state of the system. You can manually generate device
names for newly attached hardware by invoking devfsadm(1M) or implicitly, by indirectly causing a lookup or readdir operation in the
filesystem to occur. For example, you can discover a disk that was attached when the system was powered down (and generate a name for that
device) by invoking format(1M)).
FILES
/dev Mount point for the /dev filesystem in the global zone.
SEE ALSO devfsadm(1M), format(1M), devfs(7FS)NOTES
The global /dev instance cannot be unmounted.
SunOS 5.11 9 June 2006 dev(7FS)
09-25-2007
