Howdy,
I'm trying to tar some directories to tape and then extract them from tape on another machine. I was hoping someone could help me with the syntax of the tar commands. Both machines are running Solaris 8.
Need to get all files and directories under the following:
... (6 Replies)
I tried to buckup some oracle archive logs (from a solaris machine) to a remote tape (in a HP-UX machine).
I added the solaris machine name and user to .rhosts, and i tried to use this commande :
tar cvf HPhost:/dev/rmt/0mn /u01/*
The probleme that it gives:
HPhost:/dev/rmt/0mn : No such... (1 Reply)
Hi all,
I need to write on a tape drive with AIX5.3.
How to know the name of this tape and what is the procedure to read and write on this tape?
Regards,
Tovo (2 Replies)
I have a zipped file that is ~ 10GB. I tried tarring it off to a tape, but I receive:
tar: <filename> too large to archive. Use E function modifier.
The file is stored on a UFS mount, so I was unable to use ufsdump.
What other options do I have? (I don't have a local file system large... (3 Replies)
I am trying to learn what command I would need to enter to tell my very old tape writer to write a large > 210 MB file from a UNIX box to 3480 tapes. I can get a single tape to write < 210 MB but if the file is large I am not aware of what command to enter to tell it to split the input file across... (0 Replies)
Hello,
This might be a dumb question, but I havent been able to find the answer anywhere.
I currently have a backup script that uses 'tar' to backup some files to tape. I need to add a directory to the backup script, but I want to use 'vdump' to back it up to tape.
So my question is can I... (3 Replies)
I've got a KSH/AIX question that I haven't been able to figure out yet.
I've got a tape archive program that "tar's" data to a tape. After creating the archive, I'd like to somehow verify that the tape is actually good. So, what I'd like to do as a simple "sanity" check that I can read the tape... (9 Replies)
Hi,
I am trying to determine if a tape is full because on 2 different tapes, im receiving 2 different kind of errors:
# uname
SunOS
# /bin/tar cvf /dev/rmt/0n /export/home
a /export/home/jerry/wlserver_10.0.tar.gz 28528 tape blocks
tar: write error: unexpected EOF
# mt -f /dev/rmt/0n... (5 Replies)
I've a tape contains a corrupt tar file. I'm using Unix SunOS 5.5.1. So when I run this command : dd if=/dev/rmt/0 of=/tmp/outputfile.tar
I get this error message :
warning /pci@1f, 0/pci@1/pci@1/sunw, isptwo@4/st@4,0 (sty): Error for command : read Error Level: Fatal Requested... (2 Replies)
Discussion started by: akaderb
2 Replies
LEARN ABOUT DEBIAN
dds2index
dds2index(1) General Commands Manual dds2index(1)NAME
dds2index - tool to create an indexfile for the use of
SYNOPSIS
dds2index [options]
DESCRIPTION
dds2index creates an index file that is required by the file extraction utility dds2tar(1). It works on tar archives stored on dds tape
devices (DAT). Since the file structure of the tape archives is used to extract the files, the archive must be an uncompressed tar ar-
chive. But compression by the transparent signal processor of the tape device is allowed.
The index created by dds2index is written to stdout by default and should normally be stored on hard disk as indexfile for later use by
dds2tar(1).
The default tape device to read from is /dev/nst0, which may be overridden with the environment variable TAPE, which in turn may be over-
ridden with the -f device option. The device must be a SCSI tape device.
OPTIONS -f devicefile
device of the tape archive. Must be a character special file.
-t indexfile
write the index to indexfile, not to stdout.
-z,--compress
write the index in (gzip) compressed mode.
--help print some screens of online help with examples through a pager and exit immediatley.
OPTIONS you didn't really need-b, --block-size
Set the maximal blocksize, dds2index can handle.
--z, --no-compress
Don't filter the archive file through gzip.
-v,--verbose
verbose mode. Print to stderr what is going on.
-h,--hash-mode
Print a hash sign '#' to stderr for each MB read from tape.
-V,--version
Print the version number of dds2index to stderr and exit immediately.
EXAMPLES
Example of getting the index from the default tape /dev/nst0 and storing it in file archive.idx:
dds2index -v -t archive.idx
WARNING
This program can only read records (tar is calling them tape blocks) up to 32 kbytes. A bigger buffer will cause problems with the Linux
device driver.
ENVIRONMENT
The environment variable TAPE overrides the default tape device /dev/nst0.
FILES
/dev/nst0 default tape device file. Must be a character special file.
SEE ALSO dds2tar(1), mt(1), mt-dds(1), tar(1), gzip(1)HISTORY
This program was created as a tool for dds2tar(1).
AUTHOR
J"org Weule (weule@cs.uni-duesseldorf.de), Phone +49 211 751409. This software is available at ftp.uni-duesseldorf.de:/pub/unix/apollo
2.4 dds2index(1)