Sponsored Content
Operating Systems Solaris Solaris 10 - breaking of mirror and change new hard disk Post 302134731 by blowtorch on Monday 3rd of September 2007 07:53:07 AM
Old 09-03-2007
Assuming you use meta, use metastat -p or metastat -c to see the mirror/submirror information. Then use metadetach to break the mirrors. The format of the command goes like: metadetach mirror_name submirror_to_break

Make sure that you break all mirrors from the same harddisk!!!

Regarding the new hdd, is it going to be the same as an existing hdd? If it is, you can use a simple method to initialize the disk. Just run

prtvtoc /dev/rdsk/cXtXdXs2 | fmthard -s - /dev/rdsk/cYtYdYs2

X is the source disk and Y is the newly installed disk. You can then recreate the mirrors with metattach.
This User Gave Thanks to blowtorch For This Post:
 

10 More Discussions You Might Find Interesting

1. HP-UX

Breaking Mirror

Can some one point this UNIX newbie to a web site or directions on the steps needed to break a mirror in HP-UNIX to change a bad hard drive. (4 Replies)
Discussion started by: egress1
4 Replies

2. Solaris

Breaking mirror for patches, sun/os 5.9

Hi, Going to be applying patches to Sun prod (dev 1st) boxes soon, I'm going to break the mirror's on 3 file systems on the root disk prior to that (/, /var, /swap),then run 9_Recommended. Then, run it for a day or 2 before re-syncing the mirrors. But, what if I want to backout of this... (1 Reply)
Discussion started by: BG_JrAdmin
1 Replies

3. Solaris

Disk Mirror in Solaris 9 via Solaris Volume Manager

Hello, I am trying to do mirror in solaris 9. I have total 0-7 disks 4 5 6 7 0 1 2 3 Drive 0 and Drive 4 = Boot Drives Need to Mirror following drives. Drive 1 and Drive 5 = Need to mirror Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5. Then i... (3 Replies)
Discussion started by: deal732
3 Replies

4. Red Hat

breaking a hard drive mirror

Hey guys i have a machine running redhat enterprise 3.8 (i believe) and it has two hard drives that are mirrored. what would i have to do to get them to act as two seperate hard drives so i have 120gb capacity total as opposed to just 60? also, what would i do if i just wanted to take one of... (4 Replies)
Discussion started by: pacman529
4 Replies

5. Solaris

How to create mirror disk in solaris machine?

hi, I'm newbie in Solaris 10. can someone explain me the steps of how to create mirror disk in Solaris machine. thanks in advance (5 Replies)
Discussion started by: Wong_Cilacap
5 Replies

6. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies

7. Solaris

Create a boot disk mirror on Solaris 10 x86

I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Discussion started by: TKD
6 Replies

8. Solaris

Solaris patching using mirror disk backup? need help!

hi friends, need help.. it is my first time patching using mirror disk backup approach, not so sure about the steps :confused: how do you detach, patch it, boot it and reattach it ? any kind soul here can advise ? thanks in advance..:) below is the information from my machine: Filesystem ... (3 Replies)
Discussion started by: Exposure
3 Replies

9. HP-UX

What is the difference between DRD and Root Mirror Disk using LVM mirror ?

what is the difference between DRD and Root Mirror Disk using LVM mirror ? (3 Replies)
Discussion started by: maxim42
3 Replies

10. Solaris

Solaris 9 x86 check disk mirror status

We have Proliant DL380 G2 running Solaris 9 x86 There are 6 physical disks installed which I believe are mirrored at hardware level to 3 sets to present 3 disks to the OS. Is there any way to check the mirror status at OS level ? I am guessing not and it may need a trip to site as we have no... (4 Replies)
Discussion started by: frustrated1
4 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 02:09 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy