08-31-2007
HI again, Really could use some more help.
Now then I have found out which disk that is malfunctioning. Can I somehow point out what disk it is?.
In the JBOD cabinet all disks are show green lights, so it seems like everything is OK, even if it isn't.
Is there any command to send out a signal to a specific drive (i.e. /dev/rdsk/c5t6d0) to start flashing yellow or shutdown?
Maybe a stupid question but I really can't see any other way to pick out the right disk from the cabinet
/Hoff
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
We have a Unix system with two hard drives. When we tried to access it this morning it had frozen, and when we rebooted it couldn't find one of the hard drives, and had quite a few bad data blocks on the other. Of course we fear the worst: that the drive is completely gone, but were not sure how... (1 Reply)
Discussion started by: Kgatliffe
1 Replies
2. Filesystems, Disks and Memory
I need some expert help, and would appreciate any feedback on the following problem:
After power outage the machine didn't allow the login. When we checked it , it looked like both disks were completely empty. Luckily, we have a backup machine, and we can restore the disks.
Has anybody seen... (3 Replies)
Discussion started by: DGoubine
3 Replies
3. HP-UX
Hi,
First of all, thanks for your help. I have downloaded freeBSD to study unix
I'm here again 'cause my HP-UX 10.x has "broken". It raise this error:
----------------------------------------------------
Diagnostic System warning:
= 0x1f005000 is POWERFAILED The diagnostic logging... (1 Reply)
Discussion started by: efrenba
1 Replies
4. Solaris
I installed solaris 5.9 on a machine SunBlade100 512Mo of RAM and 18Go of hard disc, after the installation I have remark that the machine starts again after 10mn with 15 mn of walk, I downloaded and installed the last patchs on the machine but the poblème persists. someone can help me and tell me... (0 Replies)
Discussion started by: toufik
0 Replies
5. Solaris
Can anyone of you help me in enabling crash dump on Solaris 5.5.1 (1 Reply)
Discussion started by: csreenivas
1 Replies
6. Solaris
hi ,
i have machine that is crashed
how i can enable core dump file & how can i find it ? :confused: (4 Replies)
Discussion started by: lid-j-one
4 Replies
7. Solaris
Hi all,
I want to put a local disk on a Sun Cluster node but scconf command explodes :eek:
My system:
* two node cluster on two VMWare virtual machines
* Solaris 10 SunOS 5.10 Generic_141415-05 i86pc i386 i86pc
* Sun Cluster 3.2 u2
* Veritas Volume manager
The situation... (2 Replies)
Discussion started by: gxmsgx
2 Replies
8. Solaris
I am supporting a server running Solaris 4.3.The server is not having ddicated system administrator and i am requred to do minor maintenance tasks.l From few days, The server is automatically crashing and i just reboot the server. I also do not see anything in /var/adm/messages that can give an... (1 Reply)
Discussion started by: asalman.qazi
1 Replies
9. SCO
Hi,
I need help, one of our servers is down, and all data in that Server are critical:
The Scenario:
-------------
I have a computer with the next architecture:
architecture=IA32
bus_types=PCI2.10,ISA,PnP1.0
hostname=xxx.xxx.xxx (the real name is hidden)
hw_provider=Generic AT... (2 Replies)
Discussion started by: danilosevilla
2 Replies
10. Solaris
Hello all;
We have a SunFire V240 with three disks that were part of a metadb. One of those disks, the boot disk, experienced a horrible death Monday night and we're now trying to recover from that.
I know very little about metadb stuff, so please be gentle with me...
I'm assuming... (3 Replies)
Discussion started by: Handon
3 Replies
LEARN ABOUT DEBIAN
cabextract
CABEXTRACT(1) General Commands Manual CABEXTRACT(1)
NAME
cabextract - program to extract files from Microsoft cabinet (.cab) archives
SYNOPSIS
cabextract [-ddir] [-f] [-Fpattern] [-h] [-l] [-L] [-p] [-q] [-s] [-t] [-v] cabinet files ...
DESCRIPTION
cabextract is a program that un-archives files in the Microsoft cabinet file format (.cab) or any binary file which contains an embedded
cabinet file (frequently found in .exe files).
cabextract will extract all files from all cabinet files specified on the command line.
To extract a multi-part cabinet consisting of several files, only the first cabinet file needs to be given as an argument to cabextract as
it will automatically look for the remaining files. To prevent cabextract from extracting cabinet files you did not specify, use the -s
option.
OPTIONS
A summary of options is included below.
-d dir Extracts all files into the directory dir.
-f When testing or extracting cabinet files, corrupted MSZIP blocks will be ignored. A warning will be printed if a corrupted MSZIP
block is encountered.
-F pattern
Only files with names that match the shell pattern pattern shall be listed, tested or extracted. On non-GNU systems, this match may
be case-sensitive.
-h Prints a page of help and exits.
-l Lists the contents of the given cabinet files, rather than extracting them.
-L When extracting cabinet files, makes each extracted file's name lowercase.
-p Files shall be extracted to standard output.
-q When extracting cabinet files, suppresses all messages except errors and warnings.
-s When testing, listing or extracting cabinets which span multiple files, only cabinet files given on the command line shall be used.
-t Tests the integrity of the cabinet. Files are decompressed, but not written to disk or standard output. If the file successfully
decompresses, the MD5 checksum of the file is printed.
-v If given alone on the command line, prints the version of cabextract and exits. Given with a list of cabinet files, it will list the
contents of the cabinet files.
AUTHOR
This manual page was written by Stuart Caie <kyzer@4u.net>, based on the one written by Eric Sharkey <sharkey@debian.org>, for the Debian
GNU/Linux system.
SEE ALSO
lcab(1)
October 30, 2005 CABEXTRACT(1)