08-30-2007
Quote:
Originally Posted by
blowtorch
You cannot run fsck on a disk! You might have a disk failure here. Check on the server if there is any disk activity on that particular disk. Also check for any warning lights on the server itself.
Hm ok. The disk belongs to an external JBOD cabinet and all disks in that show no sign of error. All LEDs are green. The server machines LEDs are all green but the disk LED is off, not showing any disk activity.
Can I only run fsck on an volume group or what do you mean?
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
We have a Unix system with two hard drives. When we tried to access it this morning it had frozen, and when we rebooted it couldn't find one of the hard drives, and had quite a few bad data blocks on the other. Of course we fear the worst: that the drive is completely gone, but were not sure how... (1 Reply)
Discussion started by: Kgatliffe
1 Replies
2. Filesystems, Disks and Memory
I need some expert help, and would appreciate any feedback on the following problem:
After power outage the machine didn't allow the login. When we checked it , it looked like both disks were completely empty. Luckily, we have a backup machine, and we can restore the disks.
Has anybody seen... (3 Replies)
Discussion started by: DGoubine
3 Replies
3. HP-UX
Hi,
First of all, thanks for your help. I have downloaded freeBSD to study unix
I'm here again 'cause my HP-UX 10.x has "broken". It raise this error:
----------------------------------------------------
Diagnostic System warning:
= 0x1f005000 is POWERFAILED The diagnostic logging... (1 Reply)
Discussion started by: efrenba
1 Replies
4. Solaris
I installed solaris 5.9 on a machine SunBlade100 512Mo of RAM and 18Go of hard disc, after the installation I have remark that the machine starts again after 10mn with 15 mn of walk, I downloaded and installed the last patchs on the machine but the poblème persists. someone can help me and tell me... (0 Replies)
Discussion started by: toufik
0 Replies
5. Solaris
Can anyone of you help me in enabling crash dump on Solaris 5.5.1 (1 Reply)
Discussion started by: csreenivas
1 Replies
6. Solaris
hi ,
i have machine that is crashed
how i can enable core dump file & how can i find it ? :confused: (4 Replies)
Discussion started by: lid-j-one
4 Replies
7. Solaris
Hi all,
I want to put a local disk on a Sun Cluster node but scconf command explodes :eek:
My system:
* two node cluster on two VMWare virtual machines
* Solaris 10 SunOS 5.10 Generic_141415-05 i86pc i386 i86pc
* Sun Cluster 3.2 u2
* Veritas Volume manager
The situation... (2 Replies)
Discussion started by: gxmsgx
2 Replies
8. Solaris
I am supporting a server running Solaris 4.3.The server is not having ddicated system administrator and i am requred to do minor maintenance tasks.l From few days, The server is automatically crashing and i just reboot the server. I also do not see anything in /var/adm/messages that can give an... (1 Reply)
Discussion started by: asalman.qazi
1 Replies
9. SCO
Hi,
I need help, one of our servers is down, and all data in that Server are critical:
The Scenario:
-------------
I have a computer with the next architecture:
architecture=IA32
bus_types=PCI2.10,ISA,PnP1.0
hostname=xxx.xxx.xxx (the real name is hidden)
hw_provider=Generic AT... (2 Replies)
Discussion started by: danilosevilla
2 Replies
10. Solaris
Hello all;
We have a SunFire V240 with three disks that were part of a metadb. One of those disks, the boot disk, experienced a horrible death Monday night and we're now trying to recover from that.
I know very little about metadb stuff, so please be gentle with me...
I'm assuming... (3 Replies)
Discussion started by: Handon
3 Replies
LEARN ABOUT HPUX
vxsplitlines
vxsplitlines(1M) vxsplitlines(1M)
NAME
vxsplitlines - show disks with conflicting configuration copies in a cluster
SYNOPSIS
vxsplitlines [-g diskgroup] [-c daname]
DESCRIPTION
If you import portions of a disk group on different systems, this can lead to conflicting configuration copies on the disks of the disk
group.
If the configuration information in a disk group is ambiguous, it may not be possible for Veritas Volume Manager to determine which config-
uration copy is most up-to-date. (This is usually termed a serial split brain (SSB) condition when it occurs in a cluster.) You cannot
import a disk group in this state unless you specify which disk's configuration copy to use.
You can use the vxsplitlines command to see which disks in a disk group have conflicting configuration copies, and use this information
together with your knowledge of the history of the disk groups' usage to determine which configuration copy is most valid.
The output from vxsplitlines displays the vxdg commands that you can run to import the disk group using the available configuration copies.
The -o selectcp option of the vxdg import command is used to select the configuration copy to use for the import.
OPTIONS
-c daname Display the SSB IDs for each disk that are stored in the configuration copy on the disk specified by its disk access name.
Note: Although the SSB IDs for some disks may match, this does not necessarily mean that those disks' configuration copies have
recorded all the configuration changes. When viewed from some other configuration copies, the SSB IDs of the same disks may not
match.
-g diskgroup
Specifies the disk group. If a disk group is not specified, the default disk group is used as determined from the rules on the
vxdg(1M) manual page.
EXAMPLES
Display the disks on each side of the split in the disk group newdg:
vxsplitlines -g newdg
Display the SSB IDs stored in the configuration copy on disk c2t4d0:
vxsplitlines -g newdg -c c2t4d0
NOTES
The vxsplitlines is primarily intended to be used with private disk groups, but it also works with shared disk groups.
The version number of the disk group must be 110 or greater.
SEE ALSO
vxdg(1M)
Veritas Volume Manager Administrator's Guide
VxVM 5.0.31.1 24 Mar 2008 vxsplitlines(1M)