Sponsored Content
Full Discussion: how to reformat a hard disk
Operating Systems Solaris how to reformat a hard disk Post 302131597 by mr_balodoy on Sunday 12th of August 2007 10:37:04 PM
Old 08-12-2007
hi joerg,

I already tried the inputs you gave me and here are the scripts...

# format

Searching for disks...done


AVAILABLE DISK SELECTIONS:
0. c0t1d0 <SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@1,0
1. c0t3d0 <SUN1.05 cyl 2036 alt 2 hd 14 sec 72>
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0
Specify disk (enter its number):

------------------------------

# ls -ltr /dev/dsk
total 32
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s0 -> ../../devicesa
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s7 -> ../../devicesh
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s6 -> ../../devicesg
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s5 -> ../../devicesf
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s4 -> ../../devicese
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s3 -> ../../devicesd
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s2 -> ../../devicesc
lrwxrwxrwx 1 root root 84 Aug 9 1995 c0t3d0s1 -> ../../devicesb
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s7 -> ../../devicesh
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s6 -> ../../devicesg
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s0 -> ../../devicesa
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s5 -> ../../devicesf
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s4 -> ../../devicese
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s3 -> ../../devicesd
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s2 -> ../../devicesc
lrwxrwxrwx 1 root root 84 Feb 2 2005 c0t1d0s1 -> ../../devicesb

------------------------------------

# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t3d0s0 47975 41567 1618 96% /
/dev/dsk/c0t3d0s6 211607 182009 8438 96% /usr
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
swap 206024 656 205368 0% /var/tmp
/dev/dsk/c0t3d0s5 96455 59527 27288 69% /export
/dev/dsk/c0t3d0s7 607086 288790 257596 53% /w.local
pylon:/export/home/vega
16068155 9052213 6855261 57% /vega
pylon:/export/home/home1
16068155 9052213 6855261 57% /home

-------------------------------------

# uname -a
SunOS robintc1 5.4 ksam.on494-patch.12/22/94 sun4m sparc

another confusion that I have is that the 2nd disk I put into the sparc computer is labeled to have 2.1G capacity but when I invoke the format command, it only has 1.05G of memory. Do you have any ideas about this?

Just tell me if you need further info about my problem 'coz I really need your input/s...

Thanks and God Bless!!!
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard Disk Problem

Does anyone know of any commands that offer the same sort of facilities of scandisk on windows. My Linux server (Mandrake 6.2) keeps crashing and gives hard disk errors when I reboot. I've used fcsk to fix any problems that arise but when I use dumpe2fs to display disk information it says that... (1 Reply)
Discussion started by: DGM
1 Replies

2. UNIX for Dummies Questions & Answers

hard disk problems

Hi all I am facing a strange problem. I am using a sun ultra10 spark machine. first i took a 20gb IDE hard disk and installed solaris 5.8. But due to some requirement i have to reinstall the OS but this time solaris 2.6. and now the hard disk capacity is only showing 8gb. Where the 12gb... (3 Replies)
Discussion started by: Prafulla
3 Replies

3. Filesystems, Disks and Memory

hard disk meltdown

I had an issue with a second hard disk in my machine. I have a sparc station running solaris 7. It was working fine but now it wont mount on boot up and when you try to mount it manually it gives an I/O error. I tried a different disk as a control which was fine. What I want to know is if my... (3 Replies)
Discussion started by: Henrik
3 Replies

4. UNIX Desktop Questions & Answers

Hard Disk

I have a cuestion. How Can I to add other hard disk to my computer? I need to configurate anyone? (4 Replies)
Discussion started by: hmaraver
4 Replies

5. UNIX for Dummies Questions & Answers

Hard Disk at 99% Help!

:eek: I use this Solaris to run CMS a call acounting software package for my job. No one could run reports today because it said the this when you logged on "The following file systems are low, and could adversely affect server performance: File system /: 99%full" Can some one please explain... (9 Replies)
Discussion started by: mannyisme
9 Replies

6. UNIX for Dummies Questions & Answers

Reformat WD 500 GB hard drive for Linux machine

Linux Red Hat machine GNOME version 2.16.0 External hard drive is a Western Digital 500 GB My Book Essential. How can I reformat the external hard drive so that I can backup my Linux machine? Thanks (1 Reply)
Discussion started by: jm4smtddd
1 Replies

7. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies

8. Red Hat

Need help for getting hard-disk traces

When we write a programme,we declare variables and compiler allocates memory to them.I want to get access to the physical block number of hard-disk where actually the data is stored by the programme " Some one help me out... (1 Reply)
Discussion started by: nagraz007
1 Replies

9. UNIX for Advanced & Expert Users

Need help for getting hard-disk traces

When we write a programme,we declare variables and compiler allocates memory to them.I want to get access to the physical block number of hard-disk where actually the data is stored by the programme " Some one help me out... (3 Replies)
Discussion started by: nagraz007
3 Replies

10. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies
disks(1M)						  System Administration Commands						 disks(1M)

NAME
disks - creates /dev entries for hard disks attached to the system SYNOPSIS
/usr/sbin/disks [-C] [-r rootdir] DESCRIPTION
devfsadm(1M) is now the preferred command for /dev and should be used instead of disks. disks creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices directory tree. It performs the following steps: 1. disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name. 2. The /dev/dsk and /dev/rdsk directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this program to designate a particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the target number for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only) 3. If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks creates the missing symbolic links. If none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries exist for other disks attached to the same controller, and if so, creates new entries using the same controller number as used for other disks on the same controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con- troller as the current disk, disks assigns the lowest-unused controller number and creates entries for the disk slices using this newly-assigned controller number. disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually, first run drvconfig(1M) to ensure /devices is consistent with the current device configuration. Notice to Driver Writers disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to be disk devices. disks(1M) requires the minor name of disk devices obey the following format conventions. The minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter- faces consists of a single lowercase ASCII character, a through u, followed by ,raw. disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8 slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire disk, while r, s, t, and u represent up to 4 additional partitions. To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F). OPTIONS
The following options are supported: -C Causes disks to remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible. -r rootdir Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found under rootdir, not directly under /. ERRORS
If disks finds entries of a particular logical controller linked to different physical controllers, it prints an error message and exits without making any changes to the /dev directory, since it cannot determine which of the two alternative logical-to-physical mappings is correct. The links should be manually corrected or removed before another reconfiguration-boot is performed. EXAMPLES
Example 1: Creating Block and Character Minor Devices The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function. #include <sys/dkio.h> /* * Create the minor number by combining the instance number * with the slice number. */ #define MINOR_NUM(i, s) ((i) << 4 | (s)) int xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance, slice; char name[8]; /* other stuff in attach... */ instance = ddi_get_instance(dip); for (slice = 0; slice < V_NUMPAR; slice++) { /* * create block device interface */ sprintf(name, "%c", slice + 'a'); ddi_create_minor_node(dip, name, S_IFBLK, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); /* * create the raw (character) device interface */ sprintf(name,"%c,raw", slice + 'a'); ddi_create_minor_node(dip, name, S_IFCHR, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); } } Installing the xkdisk disk driver on a Sun Fire 4800, with the driver controlling a SCSI disk (target 3 attached to an isp(7D) SCSI HBA) and performing a reconfiguration-boot (causing disks to be run) creates the following special files in /devices. # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/ brw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a crw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw brw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b crw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw brw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c crw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw brw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d crw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw brw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e crw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw brw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f crw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw brw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g crw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw brw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h crw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw /dev/dsk will contain the disk entries to the block device nodes in /devices # ls -l /dev/dsk /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h and /dev/rdsk will contain the disk entries for the character device nodes in /devices # ls -l /dev/rdsk /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw FILES
/dev/dsk/* Disk entries (block device interface) /dev/rdsk/* Disk entries (character device interface) /devices/* Device special files (minor device nodes) ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F) Writing Device Drivers BUGS
disks silently ignores malformed minor device names. SunOS 5.10 7 Nov 2002 disks(1M)
All times are GMT -4. The time now is 09:00 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy