Telnet Session to AIX Post: 302130732

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

telnet session timeout

hi, we can set something such that if the user has been idle for a while, it will auto disconnect. where to do so? thanks

2. Shell Programming and Scripting

Telnet session does not expire

Dear friends.. Our project has a module that runs on handheld devices. Through the handheld we telnet to solaris where the application actually runs. I noticed that after starting a session through the handheld, if i go out of range or if i remove and replace the battery in the handheld, the...

3. Shell Programming and Scripting

Telnet Session

{ sleep 2 echo "$user" sleep 2 echo "$password" sleep 2 echo " ls" sleep 10 echo "exit" }| telnet $server I have a machine x and i have executed the above script on machine 'x'. i entered the...

4. IP Networking

intercept the ip address of a telnet session

The situation: a Unix system (UnixWare 7.1.3) to which are connected other systems; various p.c. on the LAN that they connect Unix to the system via TelNet. The problem: I need to intercept the address IP of the p.cs. connected via telnet to the Unix system. Particularly, I have to know the...

5. UNIX for Dummies Questions & Answers

check for successfull telnet session

In either case using ksh or tcl, how can I check that I have a successfule telnet session and am being prompted with a tacacs login prompt ? :confused: DOIT () { sleep 2 echo "<tacacs name >" sleep 1 echo "<password>" echo "en" sleep 1 echo "<enable password>" echo "term length 512"...

6. UNIX for Dummies Questions & Answers

Unix Telnet session

Hi Is there any way whilst in a telnet session you can view your client machine name that you are using to connect to the Unix box ? :eek:

7. UNIX for Dummies Questions & Answers

Disconnecting a telnet session

How can I disconnect an existing telnet session? The host is a serial port server with multiple ports. The users login using the host's name and a port, i.e. telnet host01 1235. Thanks.

8. HP-UX

ssh session getting hung (smilar to hpux telnet session is getting hung after about 15 minutes)

Our network administrators implemented some sort of check to kill idle sessions and now burden is on us to run some sort of keep alive. Client based keep alive doesn't do a very good job. I have same issue with ssh. Does solution 2 provided above apply for ssh sessions also?

9. AIX

AIX 5.3 : Limitation to 1 telnet session for some users

Hi, I search the way to limit, for a group on a AIX 5.3, one telnet session by user (Simultaneous). I search a lot in /etc/security but the only way found is with the pam authentication that i not use. No solution found also in smit menu... Thanks for your help.

LEARN ABOUT V7

defaultrouter

defaultrouter(4)                                                   File Formats                                                   defaultrouter(4)

NAME

       defaultrouter - configuration file for default router(s)

SYNOPSIS

       /etc/defaultrouter

DESCRIPTION

       The /etc/defaultrouter file specifies a IPv4 host's default router(s).

       The format of the file is as follows:

       IP_address
       ...

       The  /etc/defaultrouter  file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If
       you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at  the  time  that
       defaultrouter is read.

       Lines beginning with the ``#'' character are treated as comments.

       The  default  routes  listed  in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will
       cause the default route added by the kernel to be deleted.

       Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an  IPv4  router.
       You can use routeadm(1M) to override this behavior.

FILES

       /etc/defaultrouter              Configuration file containing the hostnames or IP addresses of one or more default routers.

SEE ALSO

       in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4)

SunOS 5.10                                                          17 Aug 2004                                                   defaultrouter(4)