Command to know port no Post: 302130130

10 More Discussions You Might Find Interesting

1. Solaris

required command to know the port no.

Can anybody have the command to know the port no using unix command for the weblogic server application.

2. AIX

Command to release a port in AIX

Hi All, I wanna know the command to release a particualr port in AIX machine without rebooting it. # netstat -a | grep 7100 tcp4 0 0 loopback.7100 *.* LISTEN # In the above example, how to release the port 7100 Thanks in advance. -Hemanshu

3. AIX

command to monitor the Serial port

Hi, Can anyone please tell me how to check the status of the serial port ?? for example,in Sun os we use the command pmadm to see the status of the serial port-- So is there any command or method in AIX,So that i can see the serial port status ?? thanks in advance ...

4. Solaris

Few things related to HBA port & fcinfo command

Hi Gurus I need to know few things related to HBA port & fcinfo command I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above...

5. Shell Programming and Scripting

command to know the application running of the port

Hi, is there any command to findout that which application is using the particular port. or whether any port is occupied with the specfic process id ?

6. Shell Programming and Scripting

Monitor Port, if active, pipe command to screen

I am a linux newbie and I am learning. I need a script that will monitor a port and if active -- only active, not listening or waiting -- then pipe some commands to the screen as if they were typed on the keyboard. Can a bash or perl script do this and if so, could someone help me out? Thanks.

7. UNIX for Dummies Questions & Answers

Need Unix command to get all processes running on a port

Hi, Can someone provide me the Linux command to get the list of all processes running on a particular port. Thanks, Sandy

8. Shell Programming and Scripting

command to match ethernet port to network card

hi I juts want to know if there is a command that checks if an ethernet port corresponds to a network card. ex. I have 3 network cards, one is two ports, and the other two 8 ports. How do I know that eth0 corresponds to the the two-port network card and eth9 corresponds to the first 8-port...

9. Shell Programming and Scripting

Need a command to change the port region

portsuf=25 port=20925 I need to replace 09 with 25 It should be like 22525. Can some please help with command or script.

10. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT DEBIAN

vdetelweb

VDETELWEB(1)						      General Commands Manual						      VDETELWEB(1)

NAME

       vdetelweb - Virtual Distributed Ethernet Telnet and/or Web management module

SYNOPSIS

       vdetelweb [ --web ] [ --telnet ] [ --nodename nodename ] [ --daemon ] [ --rcfile rcfile ] mgmt_socket

DESCRIPTION

       vdetelweb implements a tiny telnet server and/or a tiny web server for the remote management of a VDE2 switch.

OPTIONS

       -w, --web
	      start the web server. At least one of --web or --telnet must be set.

       -t, --telnet
	      start the telnet server. At least one of --web or --telnet must be set.

       -n, --nodename nodename
	      specify  the  nodename as seen from remote connections (e.g. in the command prompt or in the web page title). uname nodename is used
	      when this option is not specified.

       -d, --daemon
	      run as a daemon, using syslog for logging.

       -f, --rcfile rcfile
	      rc file to set the initial switch configuration.	When not specified, vdetelweb searches for ~/.vde/vdetelwebrc and /etc/vde/vdetel-
	      webrc. At leas one rc file must exist and be readable.

       -h, --help
	      print help. please use it for a more complete list of options.

       mgmt_socket
	      is  the  managemnt  socket  used to communicate with the vde_switch.  (This option must match the path used in the -M option for the
	      vde_switch).

NOTICE

       Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik  und  Informationstechnik"
       i.e. the German "Association for Electrical, Electronic & Information Technologies").

SEE ALSO

       vde_switch(1), vde_plug(1), vdeq(1).  dpipe(1).	unixterm(1).

AUTHOR

       VDE is a project by Renzo Davoli <renzo@cs.unibo.it>

Virtual Distributed Ethernet					   June 16, 2008						      VDETELWEB(1)

10 More Discussions You Might Find Interesting

1. Solaris

required command to know the port no.

Discussion started by: Amit_kolurwar

2. AIX

Command to release a port in AIX

Discussion started by: hemanshupatira

3. AIX

command to monitor the Serial port

Discussion started by: smartgupta

4. Solaris

Few things related to HBA port & fcinfo command

Discussion started by: girish.batra