Network lost after reboot Post: 302128214

7 More Discussions You Might Find Interesting

1. Solaris

Network Connectivity lost after reboot

I have 4 V440 servers running Solaris 9. I have their interfaces configured (ce0) and have connectivity to our network. However, after reboot,...the connectivity is lost although the interface shows that its still up after an ifconfig -a. Only after I reconfigure the interface do I restore...

2. Solaris

[help]network error after reboot server v890 sparc

hi expert, i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below : Setting default IPv4 interface for multicast: add net 224.0/4: gateway...

3. AIX

tuning network parameters : parameters not persist after reboot

Hello, On Aix 5.2, we changed the parameters tcp_keepinit, tcp_keepintvl and tcp_keepidle with the no command. tunrestore -R is present in inittab in the directory /etc/tunables we can clearly see the inclusion of parameters during reboot, including the file lastboot.log ...

4. SuSE

reboot and boot from network

Hello, Does any one know any command which reboot the system and select as boot device the network. I give bootnet to many servers at once and i want to avoid opening ILOM and select as boot device the network. Can i do it by just executing a command? Thanks in advance

5. UNIX for Dummies Questions & Answers

Will authconfig make permanent change or lost after reboot?

Hi, I made following configuration to create user directory: # authconfig --enablemkhomedir --update But the directory is created as permission 755, I'd like to modify the script to change directory access permission to 700, where is the script which copies /etc/skel to /home...

6. IP Networking

Finding lost machine on network trouble

Couldn't find my PC on network. Root of evil the was in bad patch-cable.

7. Solaris

Changing "rx_queue_number" in "ixgbe.conf". Reboot or Network Restart?

Hi all, First post here. Working on Solaris 10, on a Sun t4-4, need to change RX queue depth(ethernet, not HBA) and was wondering if i could get by with just restarting the network or if i should just bounce the whole shebang. Apologies if i missed a similar thread. if there is one, please...

LEARN ABOUT OSF1

reboot

reboot(8)						      System Manager's Manual							 reboot(8)

NAME

       reboot - Restarts the machine

SYNOPSIS

       /usr/sbin/reboot [-dlnq]

DESCRIPTION

       When  the  system  is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation.  If no users are
       logged in, use the reboot command.

       The reboot command normally stops all running processes, syncs the disks, logs the reboot,  and	writes	a  shutdown  entry  in	the  login
       accounting file, /var/adm/wtmp.

       The  reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
       ware time-of-day clock.	After these activities, the system reboots.  By default, the system starts and the file systems are  automatically
       checked.  If the start-up activities are successful, the system comes up in the default run-level.

       You must have root privileges to use this command.  Using the -n flag can result in file system damage.

FLAGS

       Generates  a  crash  dump  of the system before halting it.  Can be used with any of the other flags.  Does not log the reboot using syslog
       Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not  log
       the reboot using syslog

EXAMPLES

       To  enable  the	default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
       shutdown, and perform other routine shutdown and reboot activities.  To shut down the system without logging the reboot, enter:	reboot	-l
       This  command  shuts  down  the	system and performs all shutdown and reboot activities, except logging the shutdown.  To reboot the system
       abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.

FILES

       Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon

RELATED INFORMATION

       Commands:  fsck(8), halt(8), init(8), savecore(8) shutdown(8), syslogd(8)

       Functions:  reboot(2), sync(2), syslog(3) delim off

																	 reboot(8)