07-19-2007
bootinfo -s hdisk0 should return the size of the disk in MBs . If it returns "0",
That is either of the following
a) A Failed disk
b) A SAN disk which is exclusively used by the other host to which it is twin-tailed.
c) A SAN disk which was zoned to this system in the past, not anymore.
Regards,
Kaps
10 More Discussions You Might Find Interesting
1. AIX
Hi.
I'm trying to reinstall AIX 4.3.3 (ML9) on an IBM PC 850 PowerPC machine but I have trouble getting an SMS diskette that will let me set the CD as bootable.
The SMS diskette I have is 1.26 and it either crashes or lists Hard Disk 0 some 20 + times (and nothing else) on the screen you... (2 Replies)
Discussion started by: dlundh
2 Replies
2. High Performance Computing
A lightweight scheduler that supports high-throughput computing (HTC) applications on Blue Gene/P. (NEW: 06/12/2008 in grid)
More... (0 Replies)
Discussion started by: Linux Bot
0 Replies
3. Red Hat
We have a Red Hat linux server running on IBM x445 hardware. There are external disks in an IBM EXP300 disk enclosure. The system is running RAID 5. One of the four IBM disks (73.4 GB 10k FRU 06P5760) has become faulty. The system is still up and running OK because of the RAID. In that same EXP300... (3 Replies)
Discussion started by: pdudley
3 Replies
4. Linux
Anyone can help me answer the question.
Why does they use Linux on IBM pSeries not AIX.
I can't understand why, cause AIX is the best supporting from IBM pSeries.
Tks you. (3 Replies)
Discussion started by: quan0509
3 Replies
5. AIX
Hi ,
I am planing to buy IBM pSeries Power5 9111-285 1,9 GHz but I am confused with few things. I would be happy if you could clear it up for me ?
1.Do I have to buy some license in order to create Lpars ?
2.Do I have to buy some license in order to use HMC , micro - partiocioning , VIOS... (4 Replies)
Discussion started by: phobus
4 Replies
6. AIX
Hi,
I want to know whether IBM AIX can be installed on the IBM e series and x series server hardware?
Thanks & Regards
Arun (2 Replies)
Discussion started by: Arun.Kakarla
2 Replies
7. AIX
Hello,
I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization.
So when booted , it goes into OPEN Firmware
I/O Hosting requires a hosting partition boot not permitted exit called
> ok
Panel shows > IO... (3 Replies)
Discussion started by: filosophizer
3 Replies
8. AIX
Hidey Ho Folks,
Looking to buy a pServer for playing around with the IBM side of things. Looked around for a bit and notice that there is a significant price gap for the used 570's (Single Units) vs the 520's and 550's that folks are selling. Curious what to watch out for in either case? And... (6 Replies)
Discussion started by: Devyn
6 Replies
9. AIX
Hi There,
I have zero information and zero knowledge for IBM virtual machine except Amazon cloud and VMware ESXi (Only Linux OS available).
Anyone could provide me the following answer -
Can IBM VM been deploy on X86 and X64 (Intel Chip)?
If answer is yes any chance to deploy AIX OS... (13 Replies)
Discussion started by: chenyung
13 Replies
10. AIX
Hi,
when I boot I get an E1DC error code. I've looked it up and it says that this error occurs during the firmware check. But the error is called "Dynamic Console Selection" .
1- Machine stopped at LCD led display = E1DC = CA00E1DC
E1DC Dynamic console selection. (maybe cable or keyboard)... (3 Replies)
Discussion started by: filosophizer
3 Replies
LEARN ABOUT CENTOS
mkqdisk
mkqdisk(8) Quorum Disk Management mkqdisk(8)
NAME
mkqdisk - Cluster Quorum Disk Utility
WARNING
Use of this command can cause the cluster to malfunction.
SYNOPSIS
mkqdisk [-?|-h] | [-L] | [-f label] [-c device -l label] [-d [-d ...]]
DESCRIPTION
The mkqdisk command is used to create a new quorum disk or display existing quorum disks accessible from a given cluster node.
OPTIONS
-c device -l label
Initialize a new cluster quorum disk. This will destroy all data on the given device. If a cluster is currently using that device
as a quorum disk, the entire cluster will malfunction. Do not run this on an active cluster when qdiskd is running. Only one
device on the SAN should ever have the given label; using multiple different devices is currently not supported (it is expected a
RAID array is used for quorum disk redundancy). The label can be any textual string up to 127 characters - and is therefore enough
space to hold a UUID created with uuidgen(1).
-f label
Find the cluster quorum disk with the given label and display information about it.
-L Display information on all accessible cluster quorum disks.
-d Increase debugging level. Specify multiple times for more information. Currently, specifying more than twice has no effect.
SEE ALSO
qdisk(5), qdiskd(8), uuidgen(1)
July 2006 mkqdisk(8)