06-26-2007
Problem restoring files from remote tape drive
Server 1 - Sun Solaris 5.8 sparc SUNW,Sun-Fire-480R with attached DLT tape drive /dev/rmt/0n
Server 2 - Old DG-UX box which has restore command on it compatible with the files on the backyup tape - backed up with dump2
Server 3 - Sun solaris 5.9 sparc SUNW,Sun-Fire-V490 with lots of free space to bring back files from backup tape.
Server 1 has run the command mt -f /dev/rmt/0n fsf 1 to move tape drive onto first dump on tape.
Server 3 has shared an area of disk space
Server 2 can get onto the shared space and from this working directory issues the command restore rf server2:/dev/rmt/0n
Getting permission denied error
Any ideas how to get around this?
Can't access the information on tape using ufsrestore or vxrestore as backup tape was created using dump2 (DG_UX)
Have .rhosts files on all servers with "servername root" for each server.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I was recently given the responsibility of the unix box at our work. Without much training, I now have to go back and restore a file from tape. I'm having some trouble with it. I'm getting an error with the blocksize.
The part of the script that does the tar looks like this:
tar cvfX... (11 Replies)
Discussion started by: citrowske
11 Replies
2. Shell Programming and Scripting
Hi,
Would appreciate if anyone could tell me if it is possible to mount (and use) a remote tape drive on a AIX server, and if so, what are the precise configuration steps needed?
The tape drive to be mounted as a remote tape drive is present on another AIX server in the same network.
... (0 Replies)
Discussion started by: dnicky
0 Replies
3. AIX
Hi,
Would appreciate if anyone could tell me if it is possible to mount (and use) a remote tape drive on a AIX server, and if so, what are the precise configuration steps needed?
The tape drive to be mounted as a remote tape drive is present on another AIX server in the same network.
... (5 Replies)
Discussion started by: dnicky
5 Replies
4. UNIX for Dummies Questions & Answers
Hi all,
I have kinda inherited this problem, but was wondering if anyone else had any ideas.
Currently all our backup rentention periods are set to 2 weeks, so that we can cycle through tapes (save money etc...). Anyhow the guys next door in IT, decided one day long long ago, that it would... (0 Replies)
Discussion started by: B14speedfreak
0 Replies
5. Solaris
hello guys,
am trying to save a file file1 to a remote tape drive using tar and i get a permission denied error as shown below:
server1%tar cvf - file1 | rsh server2 dd of=/dev/rmt/1m conv=sync
a file1 1883905K
permission denied
since server2 requires login username and password, i see in... (3 Replies)
Discussion started by: nom
3 Replies
6. UNIX for Dummies Questions & Answers
We have 2 UNIX machines,
1.HP-UX 11i where oracle database running on it.
2.AIX 5 with Ultrium LTO3 tape drive connected.
My query is, i want to send oracle database archive files from HP machine to the tape drive which connected on AIX machine, everyday.
These files should be appended.
I... (3 Replies)
Discussion started by: yashdbad
3 Replies
7. Solaris
Hello all,
I'm trying to backup some files on a solaris 10 machine to the remote tape drive connected to another solaris 10 machine.
I have set up rsh to allow for password-less connection between the servers, but I'm not able to write to the tape with the command:
root@sdp4a>tar cvf... (1 Reply)
Discussion started by: kerrygold
1 Replies
8. UNIX for Advanced & Expert Users
Good day all!
I need to recover FS from backup, but the thing is that tape drive cable is not compatible with the server's input (tape drive's cable is wide, but at the server input (V240) is tight one). So, I want to connect this tape drive to another Solaris based server and mount tape drive... (3 Replies)
Discussion started by: nypreH
3 Replies
9. Shell Programming and Scripting
hi all ,
a messages appeared to me when i was checking my /var/adm/messages
and the below code was in it
Oct 6 13:15:21 medprod scsi: /pci@3,700000/SUNW,emlxs@0/fp@0,0/st@w21000024ff305234,7 (st1):
Oct 6 13:15:21 medprod Restoring tape position at fileno=320,... (5 Replies)
Discussion started by: semaan
5 Replies
10. UNIX for Dummies Questions & Answers
Hello everyone.
I googled a little bit, and the best anwers i had were found in this forum. But , unfortunately, they couldn't give me a solution. So i decided to ask the question completely.
I have two servers:
One RHEL 5 , x64 , with a SCSI DAT72 Tape Drive.
Another (the new one), with... (0 Replies)
Discussion started by: pablobhz
0 Replies
mt(1) General Commands Manual mt(1)
Name
mt - magnetic tape manipulating program
Syntax
mt [-f tapename] command [count]
Description
The command permits the operation of a magnetic tape drive.
Options
The -f flag option uses the specified tape device (next argument) in place of either that tape device defined by your TAPE environment
variable (.login or .profile) or /dev/nrmt0h.
Some operations may be performed multiple times by specifying count. By default, performs the requested operation once.
The command argument defines the operation to be performed. Only as many characters as are required to uniquely identify a command need be
specified.
The following is a list of commands:
bsf Backspace count files.
bsr Backspace count records.
cache Allows to use the cache buffer on a tape drive that has the cache buffer feature.
clhrdsf Clear hardware/software problem. Works with tape drives which use the TMSCP tape controller interface This command is
restricted to root access only.
clserex Clear serious exception. Works with tape drives which use the TMSCP tape controller interface
clsub Clear subsystem. Works with tape drives which use the TMSCP tape controller interface This command is restricted to
root access only.
eof, weof Write count end-of-file marks at the current position on the tape.
eotdis Disable end-of-tape detection. When the end of tape is reached, the tape will run off the reel. Only the superuser
can issue this command. The command remains in effect for the device until end-of-tape detection is enabled with the
eoten command.
eoten Enable end-of-tape detection. When the end-of-tape markers are reached, the tape is halted on the reel, between the
two end-of-tape markers. Only the superuser can issue this command. The command remains in effect for the device
until end-of-tape detection is disabled with the eotdis command. This is the default mode after a system boot.
fsf Forward-space count files.
fsr Forward-space count records.
nocache Disables the use of the cache buffer for any tape drive that has the cache buffer feature.
offline, rewoffl Rewind the tape and place the tape unit off-line.
retension Retensions the tape. Retension means moving the tape one complete pass between EOT and BOT.
rewind Rewind the tape.
status Print status information about the tape unit.
Examples
This example shows how to rewind the tape
mt -f /dev/rmt0l rewind
This example shows how to backspace the tape nmt1h three files:
mt -f /dev/nrmt1h bsf 3
This example shows how to write two end-of-file marks at the current position on tape nmt6h:
mt -f /dev/nrmt6h eof 2
Return Values
In shell scripts, returns a 0 exit status when the operation(s) were successful, 1 if the command was unrecognized, and 2 if an operation
failed.
Files
/dev/rmt?h or /dev/rmt?l
Raw magnetic tape interface with rewind when closed
/dev/nmt?h or /dev/nmt?l
Raw magnetic tape interface with no rewind when closed
See Also
dd(1), tar(1), ioctl(2), mtio(4), tms(4), environ(7)
mt(1)