06-07-2007
Quote:
Originally Posted by jgt
The diskette has the device driver for the SCSI host adapter.
You should be able to make one from the Compaq/HP Smartstart CD.
You will also need the serial number and activation key.
Does this system have RAID?. It seems to me that a two drive system, with one of 4 to 8gb and one of 72gb is rather unusual.
More likely the system has two 72gb drives in it that are mirrored.
Some RAID systems will only boot from drive 0 of a RAID 1 configuration, so it may appear that all data has been lost even though only one of the two drives has failed.
I strongly suggest that you find a local SCO reseller, or at least a local HP dealer in order to determine the exact system configuration before you do anything.
It's not an HP Computer it's a Dell PowerEdge 1800.
It's not a RAID System.
The three file systems are on one physically installed drive.
I believe the boot CD has the SCSI driver on it already.
I'll get more information regarding the boot CD and post that shortly.
-
T'Hog
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I noticed this in a search for more security tools...
It IS possible to "undelete" a file; I suppose recover would be a better term for it. I suppose we've all made the boo-boo (that we all hopefully learned from) of deleting a file, and finding that you do not have a backup. I wouldn't... (1 Reply)
Discussion started by: LivinFree
1 Replies
2. SCO
I am helping a company recover a system that is SCO OS 5.0.5 - they have their backup media, cd copies of SCO, but they do not have their license keys to install and SCO is being difficult in validating their license.
Does anyone have an install license key for 5.0.5 that they would be willing... (1 Reply)
Discussion started by: ggraham
1 Replies
3. UNIX for Dummies Questions & Answers
Hello,
I was reading the manual on rm and it states that when you use 'rm' the files are usual recoverable, how is this done?
Does it assume that a backup system is in place?
Cheers
Jack (4 Replies)
Discussion started by: jack1981
4 Replies
4. Filesystems, Disks and Memory
In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible:
1) Make the non-bootable scsi drive bootable? How?
2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive?
I seek... (1 Reply)
Discussion started by: bfisk
1 Replies
5. UNIX for Dummies Questions & Answers
Hello,
By accident I erased a file at work and I need to restore it from a backup tape. My manager says I will have to use the mt command with the fsf option to look through the tape but I am confuzed. I did a restore -t to get a listing of the tape. This is taking a long time.
If I sound... (1 Reply)
Discussion started by: mojoman
1 Replies
6. High Performance Computing
Hi all,
I'm writing an MPI application, in which I handle failures and recover them. In order to do that, in case of one node failure, I would like to remove that node from the MPI_COMM_WORLD group and continue with the remaining nodes.
Does anybody know how I can do that?
I'm using... (5 Replies)
Discussion started by: SaTYR
5 Replies
7. AIX
Hi,My system is not booting and at the startup it is getting struck.In HMC error code is coming as 0000, I know the reason of failing.I have few queries on recovery, please answer:1. I have mksysb of the system from which I can restore the system but problem is my few application mount point was a... (5 Replies)
Discussion started by: aixpank
5 Replies
8. Shell Programming and Scripting
I deleted one of the job from the cron tab. I want to get it back. How can i do this.
pplease suggest me..
thanks (1 Reply)
Discussion started by: pranabrana
1 Replies
9. SCO
I'm sorting out the disaster recovery plan for a critical server. It's a Dell PowerEdge 2850 running Openserver 5.0.6a.
We have a disaster recovery agreement with HP and they have just confirmed that in the event of a total disaster such as the server being totally wiped out, they would NOT... (2 Replies)
Discussion started by: mmcardle
2 Replies
10. UNIX for Advanced & Expert Users
I accidentally deleted a very important directory today with this rm -r. What would be the recommended way to recover my directory? After a lot of googleing I have seen these choices. Could I get some recommendations please?
Testdisk
Photorec- Doesn't recover file name like I would like. ... (10 Replies)
Discussion started by: cokedude
10 Replies
ASR(4) BSD Kernel Interfaces Manual ASR(4)
NAME
asr -- driver for Adaptec I2O based SCSI/ATA host bus adapters
SYNOPSIS
device asr
DESCRIPTION
The Adaptec asr driver provides access to disks and disk arrays controlled by I2O based host bus adapters and SmartRAID SCSI RAID adapters
through the standard SCSI disk da(4) interface.
The supported adapters provide 64 bit PCI, Compact PCI, Zero Channel PCI, and up to four channels of Ultra2, Ultra 160, or Ultra320 SCSI, or
two channels of 1GB Fibre. All support RAID-0, RAID-1, RAID-10, RAID-5 and RAID-50 arrays. All SCSI target types are supported. For the
ATA based controllers, one IDE drive per channel is supported. Hot-swapping of IDE drives is not supported at this time.
All host bus adapters must be configured before they can be used with any operating system. Please contact Adaptec directly to obtain the
latest information on configuration utilities for the adapters. Currently there are both a Motif based GUI configuration utility and a CLI
based configuration utility available from the Adaptec Web site. The cards and arrays can also be configured via the BIOS based configura-
tion tool (SMOR).
HARDWARE
The adapters currently supported by the asr driver include the following:
o Adaptec Zero-Channel SCSI RAID 2000S, 2005S, 2010S, 2015S
o Adaptec SCSI RAID 2100S, 2110S
o Adaptec ATA-100 RAID 2400A
o Adaptec SCSI RAID 3200S, 3210S
o Adaptec SCSI RAID 3400S, 3410S
o Adaptec SmartRAID PM1554
o Adaptec SmartRAID PM1564
o Adaptec SmartRAID PM2554
o Adaptec SmartRAID PM2564
o Adaptec SmartRAID PM2664
o Adaptec SmartRAID PM2754
o Adaptec SmartRAID PM2865
o Adaptec SmartRAID PM3754
o Adaptec SmartRAID PM3755U2B / SmartRAID V Millennium
o Adaptec SmartRAID PM3757
o DEC KZPCC-AC (LVD 1-ch, 4MB or 16MB cache), DEC KZPCC-CE (LVD 3-ch, 64MB cache), DEC KZPCC-XC (LVD 1-ch, 16MB cache), DEC KZPCC-XE (LVD
3-ch, 64MB cache) -- rebadged SmartRAID V Millennium
FILES
/dev/asr* Adaptec SCSI RAID control nodes
NOTES
The ATA based controllers present their devices as SCSI-like devices via CAM. For IDE drives attached to these cards, a subset of standard
SCSI commands and mode pages are understood via translation performed in the card's firmware.
SEE ALSO
da(4)
HISTORY
The asr (Adaptec SCSI RAID) driver first appeared as the dpti2o driver under BSDi BSD/OS 3.2, then under FreeBSD 2.2.8 and was ported over to
the CAM layer represented in 4.0.
AUTHORS
The asr driver was kindly donated by Adaptec and is maintained by Mark Salyzyn <mark_salyzyn@adaptec.com>. This manual page was written by
Mark Salyzyn and fixed up by Jeroen Ruigrok van der Werven <asmodai@FreeBSD.org>.
BSD
July 14, 2004 BSD