Disk replacement with svm Post: 302118154

10 More Discussions You Might Find Interesting

1. Solaris

Disk Replacement SVM

Hello, Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do... 1. Remove the db replicas from the bad disk. 2. Detach it from the mirror 3. Clear it with...

2. Solaris

Removing Disk from SVM

Hi All, I have to remove the disk from SVM. Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion. Thanks in anticipation!

3. Solaris

Disk space missing under SVM

Hi Gurus, I've got an issue here: (1) Hardware: Sun NetraT1, (2) OS: Solaris 10, (3) SVM metastat shows /var having 12 GB. df shows /var having 4 GB. Real space for /var is about 4 GB since I can't move a big file to it. How is 8 GB space missing? Does /var/run swap need to account? Can I...

4. Solaris

Root Disk mirroring in SVM

Dear All, Please help me to configure root mirroring using SVM in Solaris 9. Thanks and Regards, Lakkireddy BR

5. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe...

6. Solaris

Root disk mirroring in SVM

I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which...

7. Solaris

Replacing a Disk in a ODS/SVM Mirror

Hi All BAsed on the below I would like to verifu two things (1) The udnerlying mirroris for '/mnt' na dit onlcy contaisne 1 sub-mirror, with one sliceon is one disk and hence, data loss on the mount point (the mount point, '/mnt' is backed up) (2) the Procedure for renewal # df -kh /mnt...

8. Solaris

Replacing a failed disk using SVM

Hi Please can you help me on replacing or removing a faulty disk drive on a SUN NETRA X4250server with 4 internal drives only. the format comand show me the following: format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <drive type unknown> ...

9. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

10. AIX

DISK ARRAY PROTECTION SUSPENDED message following disk replacement

LEARN ABOUT OSX

installboot

installboot(1M) 														   installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk	       The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
		       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

	      example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
		   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

	   directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

	   second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

								    11 Apr 2005 						   installboot(1M)