05-01-2007
Disk Mirror in Solaris 9 via Solaris Volume Manager
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i have umount from /prod1----/prod5.
I have done following steps.
metadb -a -f /dev/dsk/c1t1d0s7
metadb -a -f /dev/dsk/c1t5d0s7
2)
metainit -f d100 1 1 c1t1d0s0
metainit -f d101 1 1 c1t5d0s0
metainit d0 -m d100
metattach d0 d101
3)
newfs /dev/md/rdsk/d0
4)
mount -F ufs /dev/md/dsk/d0 /prod1
Now, target 5 is submirror with target 1 mirror. Do i need to submirror drive 1 also, in order to mirror each other?
for example:
metainit -f d102 1 1 c1t5d0s0
metainit -f d103 1 1 c1t1d0s0
metainit d1 -m d102
metattach d1 d103
Let me know.
Thanks
Adeel
10 More Discussions You Might Find Interesting
1. Solaris
Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
Discussion started by: nageswarb
0 Replies
2. Solaris
Can you please let me know the certification code for veritas volume manager in solaris ? Thanks in advance. (2 Replies)
Discussion started by: gowthamakanthan
2 Replies
3. Solaris
Hello All,
I have small doubt. It's related to SVM in solaris 10. I have created raid 0 (striping) using 3 slices of 500 MB size (default interlace value as 32KB)
d2: Concat/Stripe ---- Interlace value is 32 KB
Size: 2923830 blocks (1.4 GB)
Stripe 0: (interlace: 64 blocks)
Device Start... (1 Reply)
Discussion started by: vaibhav.kanchan
1 Replies
4. Solaris
Hi Friends,
I have to migrate my raid-1 volume to raid -5 online.
Can anyone please help me, If possible then send me the step by step commands for online migration.
Thanks in advance. (2 Replies)
Discussion started by: rajaramrnb
2 Replies
5. Solaris
Hello:
I have a machine built on 2 drives and mirrors have been created to a second set of 2 drives (4 total) on the same platform. SVM.
Might anyone provide guidance to create a second machine by breaking the mirrored set, moving the two mirrors (2) to another machine (same platform type),... (1 Reply)
Discussion started by: 4dailyrunner
1 Replies
6. UNIX for Dummies Questions & Answers
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Discussion started by: rookieuxixsa
1 Replies
7. Solaris
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Discussion started by: ramareddi16
1 Replies
8. Solaris
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
Discussion started by: fretagi
0 Replies
9. Solaris
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Discussion started by: fretagi
4 Replies
10. Solaris
Hello Admins..
I am going through solaris volume manager guide for RAID-0 concatenation and stripes, I do not understand the concept of stripe from following example of concatenation.
There is an eample for concatenation:
# metainit d25 1 1 c0t1d0s2
d25: Concat/Stripe is setup
the... (5 Replies)
Discussion started by: snchaudhari2
5 Replies
LEARN ABOUT DEBIAN
ropkg::simba::exceptions
RoPkg::Simba::Exceptions(3pm) User Contributed Perl Documentation RoPkg::Simba::Exceptions(3pm)
NAME
RoPkg::Simba::Exceptions
VERSION
0.1.3
DESCRIPTION
Collection of exceptions used by Simba
SYNOPSIS
NotHashRef->throw(
error => 'No hash reference found',
pkg_name => 'RoPkg::Simba'
);
DEPENDENCIES
Exception::Class
SUBROUTINES
/METHODS
The following exceptions are defined:
*) NotHashRef - the parameter is not a hash reference
*) Mirror::Config - error in configuration of the mirror
*) Mirror::Inactive - the mirror is not active
*) Mirror::InProgress - the mirror is in progress
*) Mirror::Many - the criteria used to select the mirror, matches multiple mirrors
*) Command::FileNotFound - command file name was not found
DIAGNOSTICS
Unpack the source, and use 'make test' command
CONFIGURATION AND ENVIRONMENT
This module does not use any configuration files or environment variables
INCOMPATIBILITIES
None known to the author
BUGS AND LIMITATIONS
None known to the author
PERL CRITIC
This module is perl critic level 2 compliant
AUTHOR
Subredu Manuel <diablo@iasi.roedu.net>
LICENSE AND COPYRIGHT
Copyright (C) 2005 Subredu Manuel. All Rights Reserved. This module is free software; you can redistribute it and/or modify it under the
same terms as Perl itself. The LICENSE file contains the full text of the license.
perl v5.14.2 2006-07-29 RoPkg::Simba::Exceptions(3pm)