Sponsored Content
Full Discussion: Reinstall root partition
Operating Systems Solaris Reinstall root partition Post 302115407 by mhm4 on Tuesday 24th of April 2007 03:44:11 PM
Old 04-24-2007
Quote:
Originally Posted by jbestor
I had Solaris 8 installed on a Ultra 10 machine but during a shutdown the root partition got corrupted. I have 3 other partitions on the drive (var, swap, home). Is there a way to reinstall the root partition without effecting the other partitions?

Also, when I run format from single user mode I get an error:

WARNING: /pci@1f,0/pci@1,1/ide@3/dad@0,0 (dad0):
Uncorrectable data Error: Block 1

DIOCTL_RWCMD: I/O error

Ready to get manufacturer's defect list from unformatted drive.
This cannot be interrupted and takes a long while.
Continue? n
[disk unformatted, no defect list found]


The disk must be formatted because I can mount the partitions. Should I say yes to getting the manufacturer's defect list?

Thanks
Jason
Rebuild os image on separate disk, mount old partitions, and cp data to new disk. You always want to use a mirrored root disk to avoid this senario. Disk Suite can be used as a cheap solution or veritas vm for a enterprise solution.
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Disk space for root partition

Hello, I am trying to monitor disk space for each node on the machine. I am able to get all individual nodes but for the '/' node. For example: df -k: bash-2.05b# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/xxx 4127108 2415340 1502120 62% / /dev/yyy ... (3 Replies)
Discussion started by: chiru_h
3 Replies

2. Solaris

Can't metattach root partition

I'm mirroring up a T2000. Able to metainit and metattach all partitions with the exception of root. Getting the following error: metattach: <hostname>; c1t1d0s0; is mounted on / I'm stumped. By the way, target 1 is the boot disk. (7 Replies)
Discussion started by: Probos
7 Replies

3. Solaris

increasing root / partition

Dear all, I have a root partition which is 20 G in size. I have var and /tmp as seperate file systems. But this 20 G of root is not sufficeint. I want to increase the size of the / partition. Is there any way to increase with out down time. my df -k output is Filesystem ... (4 Replies)
Discussion started by: jegaraman
4 Replies

4. Red Hat

increase root partition

i am using redhat 5.4 and my root size shows 98 %, how can i increase root size # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 77G 16G 75G 98% / /dev/sda1 2.4G 82M 2.2G 4% /boot tmpfs 3.8G 0 3.8G 0%... (8 Replies)
Discussion started by: reply.ravi
8 Replies

5. Solaris

Root partition filling up

I have a T1000 Sparc server that has a relatively small root partition which is 24Gb and a larger partition dedicated to /export/home that is approximately 100 Gb. We have a lot of data going to /var/audit and to /var/core/corefiles. Is there any non-destructive way to redirect files from... (4 Replies)
Discussion started by: goose25
4 Replies

6. Solaris

Need to partition root

Hello guys, I am using Solaris 10 x86 OS. While installing OS i have allocated entire 10 GB space to the root. Now i am not able to create new partition it says me "out of range" or "<cylinder number> not expected". Can someone please help me to allocated a default recommended space i.e 8GB or... (2 Replies)
Discussion started by: bhargav90
2 Replies

7. Solaris

Cannot tell what is filling up root (/) partition on Sol10

I can see that my root partition is down to single-digit GB free out of 134GB root partition on a larger server with many SAN, NFS, LOFS mounts etc mounted at the root (/) partition. How can I specifically tell which directories is causing the most utilization in my root (/) partition? (3 Replies)
Discussion started by: ckmehta
3 Replies

8. Linux

How to increase root space from another partition?

Hi OS Experts I would like to increase root partition from another partition so that I can save more documents in Home and Desktop. whether it is possible without formating root partition if so please explain here is o/p of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9... (8 Replies)
Discussion started by: Akshay Hegde
8 Replies

9. SCO

Resize root partition

I have SCO Openserver 5.0.5 Root partition is 96% full and I would like to make it bigger. How can this be done? 1) Can I use 'dd' to backup 'root' and then backup '/u' to a third hard disk, then divvy the primary hard disk to have a larger 'root' filesystem (i.e. previous root + u) 2) ... (5 Replies)
Discussion started by: grips03
5 Replies

10. Ubuntu

Regarding OS partition and root user

Dear Concern, I am new in ubuntu. Is root user disable in ubuntu? Also, is os partition default in ubuntu? I don't find any feature to create customize mount point to install OS. Below is my current OS partition. amirislam@blnidapp03:~$ df -h Filesystem Size Used... (1 Reply)
Discussion started by: makauser
1 Replies
SYSTEMD-GPT-AUTO-GENERATOR(8)				    systemd-gpt-auto-generator				     SYSTEMD-GPT-AUTO-GENERATOR(8)

NAME
systemd-gpt-auto-generator - Generator for automatically discovering and mounting root, /home and /srv partitions, as well as discovering and enabling swap partitions, based on GPT partition type GUIDs. SYNOPSIS
/lib/systemd/system-generators/systemd-gpt-auto-generator DESCRIPTION
systemd-gpt-auto-generator is a unit generator that automatically discovers root, /home, /srv and swap partitions and creates mount and swap units for them, based on the partition type GUIDs of GUID partition tables (GPT). It implements the Discoverable Partitions Specification[1]. Note that this generator has no effect on non-GPT systems, or where the directories under the mount points are already non-empty. Also, on systems where the units are explicitly configured (for example, listed in fstab(5)), the units this generator creates are overridden, but additional implicit dependencies might be created. This generator will only look for root partitions on the same physical disk the EFI System Partition (ESP) is located on. It will only look for the other partitions on the same physical disk the root file system is located on. These partitions will not be searched on systems where the root file system is distributed on multiple disks, for example via btrfs RAID. systemd-gpt-auto-generator is useful for centralizing file system configuration in the partition table and making manual configuration in /etc/fstab or suchlike unnecessary. This generator looks for the partitions based on their partition type GUID. The following partition type GUIDs are identified: Table 1. Partition Type GUIDs +-------------------------------------+--------------------------------+--------------------------------------+ |Partition Type GUID | Name | Explanation | +-------------------------------------+--------------------------------+--------------------------------------+ |44479540-f297-41b2-9af7-d131d5f0458a | Root Partition (x86) | On 32-bit x86 systems, the first x86 | | | | root partition on the disk the EFI | | | | ESP is located on is mounted to the | | | | root directory /. | +-------------------------------------+--------------------------------+--------------------------------------+ |4f68bce3-e8cd-4db1-96e7-fbcaf984b709 | Root Partition (x86-64) | On 64-bit x86 systems, the first | | | | x86-64 root partition on the disk | | | | the EFI ESP is located on is mounted | | | | to the root directory /. | +-------------------------------------+--------------------------------+--------------------------------------+ |69dad710-2ce4-4e3c-b16c-21a1d49abed3 | Root Partition (32-bit ARM) | On 32-bit ARM systems, the first ARM | | | | root partition on the disk the EFI | | | | ESP is located on is mounted to the | | | | root directory /. | +-------------------------------------+--------------------------------+--------------------------------------+ |b921b045-1df0-41c3-af44-4c6f280d3fae | Root Partition (64-bit ARM) | On 64-bit ARM systems, the first ARM | | | | root partition on the disk the EFI | | | | ESP is located on is mounted to the | | | | root directory /. | +-------------------------------------+--------------------------------+--------------------------------------+ |993d8d3d-f80e-4225-855a-9daf8ed7ea97 | Root Partition (Itanium/IA-64) | On Itanium systems, the first | | | | Itanium root partition on the disk | | | | the EFI ESP is located on is mounted | | | | to the root directory /. | +-------------------------------------+--------------------------------+--------------------------------------+ |933ac7e1-2eb4-4f13-b844-0e14e2aef915 | Home Partition | The first home partition on the disk | | | | the root partition is located on is | | | | mounted to /home. | +-------------------------------------+--------------------------------+--------------------------------------+ |3b8f8425-20e0-4f3b-907f-1a25a76f98e8 | Server Data Partition | The first server data partition on | | | | the disk the root partition is | | | | located on is mounted to /srv. | +-------------------------------------+--------------------------------+--------------------------------------+ |0657fd6d-a4ab-43c4-84e5-0933c84b4f4f | Swap | All swap partitions located on the | | | | disk the root partition is located | | | | on are enabled. | +-------------------------------------+--------------------------------+--------------------------------------+ |c12a7328-f81f-11d2-ba4b-00a0c93ec93b | EFI System Partition (ESP) | The first ESP located on the disk | | | | the root partition is located on is | | | | mounted to /boot or /efi, see below. | +-------------------------------------+--------------------------------+--------------------------------------+ The /home and /srv partitions may be encrypted in LUKS format. In this case, a device mapper device is set up under the names /dev/mapper/home and /dev/mapper/srv. Note that this might create conflicts if the same partition is listed in /etc/crypttab with a different device mapper device name. Mount and automount units for the EFI System Partition (ESP) are generated on EFI systems. The ESP is mounted to /boot, unless a mount point directory /efi exists, in which case it is mounted there. Since this generator creates an automount unit, the mount will only be activated on-demand, when accessed. On systems where /boot (or /efi if it exists) is an explicitly configured mount (for example, listed in fstab(5)) or where the /boot (or /efi) mount point is non-empty, no mount units are generated. When using this generator in conjunction with btrfs file systems, make sure to set the correct default subvolumes on them, using btrfs subvolume set-default. systemd-gpt-auto-generator implements systemd.generator(7). SEE ALSO
systemd(1), systemd.mount(5), systemd.swap(5), systemd-fstab-generator(8), systemd-cryptsetup@.service(8), cryptsetup(8), fstab(5), btrfs(8) NOTES
1. Discoverable Partitions Specification https://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/ systemd 237 SYSTEMD-GPT-AUTO-GENERATOR(8)
All times are GMT -4. The time now is 01:29 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy