Sponsored Content
Operating Systems Solaris Ultra 60 strange disk problems Post 302114396 by poltergeist on Sunday 15th of April 2007 11:33:20 AM
Old 04-15-2007
Ultra 60 strange disk problems

Hello,

I just bought a nice ultra 60 with 2x36gb scsi disks (fujitsu MAJ3364MC, sun partnr 540-4521).

If i do a probe-scsi-all in obp the disk anounces itself as SUN36G.

In a booted system however, I can only use 9 gb and the disk is seen in format as 9.0 gb.

My own wild uneducated guess: As the system is about 10 years old, it was probably sold with 9 gb disks. Those disks might have failed in the past and replaced with 36gb disks with 9gb firmware.....

I have spectrum acces to sunsolve, but i've not been able to find anything related to this issue, neither was I able to find a firmware upgrade for this type of disk.

Thanks if anyone can help me to have a clue

Greets

Erwin
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

hard disk problems

Hi all I am facing a strange problem. I am using a sun ultra10 spark machine. first i took a 20gb IDE hard disk and installed solaris 5.8. But due to some requirement i have to reinstall the OS but this time solaris 2.6. and now the hard disk capacity is only showing 8gb. Where the 12gb... (3 Replies)
Discussion started by: Prafulla
3 Replies

2. Filesystems, Disks and Memory

Disk drive and Ultra 10

I need more space on my Ultra 10, and was thinking of a pair of 60 or 80 GB 7200 rpm ATA/100 drives mirrored with DiskSuite. Will afterarket IDE drives work in the Sun box? Are there any issues? (1 Reply)
Discussion started by: 98_1LE
1 Replies

3. Solaris

problems with my M3 video card and my Tatung Ultra 10 clone

i took this Elite 3D M3 video card out of my Ultra 60 machine which was replaced with an M6. the card was working w/o issue in the Ultra 60. however, i'm getting no video when i power the Tatung machine. yes, the M3 is does work with an AXi motherboard. any ideas what's causing the problem? (1 Reply)
Discussion started by: xyyz
1 Replies

4. Filesystems, Disks and Memory

Add a new disk to Ultra 10

I am using an ultra 10 with Solaris 9.... I want to add a new disk that I can play around with partitions, maybe mirroring - that type of thing.. Its a test box.. I need help on what I can buy - and what I need, cables etc to add new disk and install it... Anyone got any pointers? (1 Reply)
Discussion started by: frustrated1
1 Replies

5. UNIX for Dummies Questions & Answers

Newbie: Sun Ultra 5 Disk Replacement

I have just started getting into unix and aquired a Sun Ultra 5 however the disk failed and I want to replace it with a spare maxtor 40Gb i have lying around. I need to partition and format the disk from its old windows format. I have looked up info on the format command in solaris 9 and I think i... (2 Replies)
Discussion started by: kalm
2 Replies

6. Linux

Strange Disk problem on Install

Hello Forum, I am getting a very strange symptom whilst doing an install of CentOS on to an X64 system and I was wondering if anyone else had seen this problem. I have two disks (PATA) installed to IDE0 (master) and the CDROM installed to IDE1 (slave) as a slave device. When I boot up the... (0 Replies)
Discussion started by: leenux_tux
0 Replies

7. Shell Programming and Scripting

Strange parameter passing problems (KSH)

Hi all, I'm having a rather peculiar problem involving parameter passing with declared functions in my shell script. Hope to get some advice here. A brief description of my code is as follows: However, I'm not getting the results I wanted. If I pass in $rdir, I'm going to end up... (4 Replies)
Discussion started by: rockysfr
4 Replies

8. Solaris

Sun Sparc Ultra 4 won't boot - disk errors

Hi all. I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'. I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies

9. Hardware

HP Compaq 6710 - Strange network problems

Hi gurus, I am experiencing strange networks problems. I am trying to teather internet from HTC Desire S with Android. Basicly I followed those instructions: https://wiki.archlinux.org/index.php/Android_Tethering#Procedure 1.) Enable USB Debugging - Phone: Settings --> Applications -->... (0 Replies)
Discussion started by: wakatana
0 Replies

10. Solaris

Sun Ultra 30 boot problems

Hi all, I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET Thanks, Rob (3 Replies)
Discussion started by: robbo007
3 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 09:58 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy