04-04-2007
Need older version of System Firmware for 7026-H80
Hi all,
I have an H80 that I'm migrating to 5.3 and prior to doing so it needed the firmware upgraded. I don't have copies of the old firmware that was on it since I was not the one who installed it and there were no copies to be found on the server itself. I installed the latest version and it seems that the SPCN is not getting the new version for some reason. The server rebooted fine until I powered it down and unplugged it and then tried bringing it back up. I get errors complaining about both power supplys in the Primary I/O drawer. I can get to the Service Processor Menu and from there I re-applied the same firmware level and I still have the problem. I'm thinking maybe there is a problem with the firmware level itself and would like to try an older version but can't locate one anywhere. Does anyone have version CM040712 or CM050203. If not I'll even take older just so I can get the server back up and running. To run AIX 5.3 at least version CM040712 is required. If anyone has any other suggestions I'd love to hear them.
Thanks for any help!
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
HAI GUYS
Man have i had the worst time with this thing. Its 400kg and doesnt respond very well to my commands.
I want to install linux or unix, dont really care, onto my IBM server. My problem is how?
I more want to install the ubunut OS on to it, but have tried every iso installer... (1 Reply)
Discussion started by: benzies
1 Replies
2. Solaris
Command to check firmware version of HP x86 server on which solaris installed.
I m not getting version by using prtdiag -v command (1 Reply)
Discussion started by: sunray
1 Replies
3. AIX
Hi all:
I have a need to down-rev my AIX HBA firmware due to storage instability after upgrading, but IBM support only makes the latest version of firmware available for download.
Can anyone provide pointer/tips for obtaining old HBA firmware ?
Specifics:
280B HBA
df1000fa driver... (1 Reply)
Discussion started by: kwachtler
1 Replies
4. Hardware
All,
I need to upgrade my HMC from version 7.3.4 to vervion 7.3.5. The HMC has a Machine type of 7310-CR2 Xseries 335 . Where could I download the firmware for such hardware (HMC Machine type of 7310-CR2 Xseries 335 )? Please answer because I need to upgrade that HMC the HMC to bring to... (3 Replies)
Discussion started by: jesifra
3 Replies
5. AIX
Dears i have a power7 P770 working in AIX 5.3 TL 11 with frimware AM730_066
is the AM730_066 frimware the latest one or not ? (6 Replies)
Discussion started by: thecobra151
6 Replies
6. Ubuntu
Hi,
I am trying to downgrade the version of rsyslog to the older version (i.e) and when i issue the below command to check the packages i dont see the required package (i.e)
and when i try to install it is complaining about package not found.
Please advise on how to install the... (1 Reply)
Discussion started by: prash358
1 Replies
7. Shell Programming and Scripting
Hi,
I have a direcory as mentioned below:
/development/arun/cycdt/
unser the above i have directories
/2013
/2012
/2011
......
.....
/2000
I need to write a script which can delete the nth version of the directories.
as in if n=10 then the script should arrange the directories in... (2 Replies)
Discussion started by: Arun Mishra
2 Replies
8. Red Hat
Guys,
How to find OS version and firmware version in LINUX?
Like in AIX.
uname -a will show me the version 5.3, 6.1,7.1.
lsmcode -c will show me - system firmware image as SF240_417.
What are the similar commands in Linux.
I checked uname -a and cat /etc/release.
uname... (1 Reply)
Discussion started by: ElizabethPJ
1 Replies
9. HP-UX
Dear All,
Please help to find out the patch and firmware versions in HP-UX systems. as uname -r is showing os version and
uname -a
HP-UX xxxxxx B.11.23 U 9000/800 2781427196 unlimited-user license.
Kindly help to find out the existing Kernel and firmware versions.
Also I need to... (3 Replies)
Discussion started by: anuragr
3 Replies
10. Solaris
I try to install php-56 in a zone, but I have the following problem:
pkg install php-56
Creating Plan (Running solver): \
pkg install: No solution was found to satisfy constraints
maintained incorporations: None
Creation Plan: dependency error (s) in proposed packages:
Not... (0 Replies)
Discussion started by: ymk369
0 Replies
LEARN ABOUT DEBIAN
fpga_load
FPGA_LOAD(8) FPGA_LOAD(8)
NAME
fpga_load - Xorcom Astribank (xpp) firmware tool
SYNOPSIS
fpga_load [-g] [-r] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV
fpga_load [-g] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV -I firmware.hex [-b dump.bin] [-i]
fpga_load -h
DESCRIPTION
fpga_load loads the FPGA firmware to the Xorcom Astribank device. The syntax resembles that of fxload(8).
OPTIONS
-b dump.bin
Before writing firmware, bump the processed binary file to dump.bin.
-D DEVICE
Required. The device to read from/write to. On modern UDEV-based system this is usually /dev/bus/usb/bus_num/device_num, where
bus_num and device_num are the first two numbers in the output of lsusb(8). On older systems that use usbfs, it is usually
/proc/bus/usb/bus_num/device_num.
-r
Reset the Astribank and renumerate its USB connection to power on product ID.
-g
Dump all eeprom data to standard output.
-I fireware_file
The firmware file to write to the device.
-i
Show information about the firmware file (valid only with -I option). Example:
./FPGA_1151.hex: Version=3297 Checksum=58270
In particular, the calculated checksum should match the output of sum(1) on the binary firmware file generated by the -b option.
-v
Increase verbosity. May be used multiple times.
-h
Displays usage message.
SEE ALSO
fxload(8), lsusb(8)
AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
16 April 2006 FPGA_LOAD(8)