04-04-2007
Need older version of System Firmware for 7026-H80
Hi all,
I have an H80 that I'm migrating to 5.3 and prior to doing so it needed the firmware upgraded. I don't have copies of the old firmware that was on it since I was not the one who installed it and there were no copies to be found on the server itself. I installed the latest version and it seems that the SPCN is not getting the new version for some reason. The server rebooted fine until I powered it down and unplugged it and then tried bringing it back up. I get errors complaining about both power supplys in the Primary I/O drawer. I can get to the Service Processor Menu and from there I re-applied the same firmware level and I still have the problem. I'm thinking maybe there is a problem with the firmware level itself and would like to try an older version but can't locate one anywhere. Does anyone have version CM040712 or CM050203. If not I'll even take older just so I can get the server back up and running. To run AIX 5.3 at least version CM040712 is required. If anyone has any other suggestions I'd love to hear them.
Thanks for any help!
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
HAI GUYS
Man have i had the worst time with this thing. Its 400kg and doesnt respond very well to my commands.
I want to install linux or unix, dont really care, onto my IBM server. My problem is how?
I more want to install the ubunut OS on to it, but have tried every iso installer... (1 Reply)
Discussion started by: benzies
1 Replies
2. Solaris
Command to check firmware version of HP x86 server on which solaris installed.
I m not getting version by using prtdiag -v command (1 Reply)
Discussion started by: sunray
1 Replies
3. AIX
Hi all:
I have a need to down-rev my AIX HBA firmware due to storage instability after upgrading, but IBM support only makes the latest version of firmware available for download.
Can anyone provide pointer/tips for obtaining old HBA firmware ?
Specifics:
280B HBA
df1000fa driver... (1 Reply)
Discussion started by: kwachtler
1 Replies
4. Hardware
All,
I need to upgrade my HMC from version 7.3.4 to vervion 7.3.5. The HMC has a Machine type of 7310-CR2 Xseries 335 . Where could I download the firmware for such hardware (HMC Machine type of 7310-CR2 Xseries 335 )? Please answer because I need to upgrade that HMC the HMC to bring to... (3 Replies)
Discussion started by: jesifra
3 Replies
5. AIX
Dears i have a power7 P770 working in AIX 5.3 TL 11 with frimware AM730_066
is the AM730_066 frimware the latest one or not ? (6 Replies)
Discussion started by: thecobra151
6 Replies
6. Ubuntu
Hi,
I am trying to downgrade the version of rsyslog to the older version (i.e) and when i issue the below command to check the packages i dont see the required package (i.e)
and when i try to install it is complaining about package not found.
Please advise on how to install the... (1 Reply)
Discussion started by: prash358
1 Replies
7. Shell Programming and Scripting
Hi,
I have a direcory as mentioned below:
/development/arun/cycdt/
unser the above i have directories
/2013
/2012
/2011
......
.....
/2000
I need to write a script which can delete the nth version of the directories.
as in if n=10 then the script should arrange the directories in... (2 Replies)
Discussion started by: Arun Mishra
2 Replies
8. Red Hat
Guys,
How to find OS version and firmware version in LINUX?
Like in AIX.
uname -a will show me the version 5.3, 6.1,7.1.
lsmcode -c will show me - system firmware image as SF240_417.
What are the similar commands in Linux.
I checked uname -a and cat /etc/release.
uname... (1 Reply)
Discussion started by: ElizabethPJ
1 Replies
9. HP-UX
Dear All,
Please help to find out the patch and firmware versions in HP-UX systems. as uname -r is showing os version and
uname -a
HP-UX xxxxxx B.11.23 U 9000/800 2781427196 unlimited-user license.
Kindly help to find out the existing Kernel and firmware versions.
Also I need to... (3 Replies)
Discussion started by: anuragr
3 Replies
10. Solaris
I try to install php-56 in a zone, but I have the following problem:
pkg install php-56
Creating Plan (Running solver): \
pkg install: No solution was found to satisfy constraints
maintained incorporations: None
Creation Plan: dependency error (s) in proposed packages:
Not... (0 Replies)
Discussion started by: ymk369
0 Replies
LEARN ABOUT DEBIAN
usbprog
USBPROG(1) USBprog USBPROG(1)
NAME
usbprog - Programmer for the USBprog hardware
SYNOPSIS
usbprog [options] [commands]
DESCRIPTION
USBprog has two modes: An interactive mode and a batch mode. Both mode use exactly the same commands. As every command takes a fixed number
of arguments, no separator is necessary between commands -- just specify as much commands as you would like to execute.
The help command gives a list of all commands, ? command can be used to get help for a specific command. Example:
(usbprog) help
(usbprog) ? upload
OPTIONS
Following options can be specified, both for the interactive and the batch mode:
-h | --help
Prints a short help.
-v | --version
Prints the version number to standard output.
-d | --datadir datadir
Uses datadir instead of ~/.usbprog.
-o | --offline
Don't try to connect to the internet. Use the cached firmware and index file(s) only.
-D | --debug
Enable debugging output.
COMMANDS
This section describes all commands. As mentioned above, the syntax is the same for interactive and batch usage.
help This just prints an overview about every command, i.e. the command name and an one-sentence description.
helpcmd | ? command
Print a detailed description for command.
exit | quit
Quit the program. On Unix, you can also send an EOF by pressing Ctrl-d on your terminal.
copying | license
Prints a short license (GPL) text and the version number of the program.
list | firmwares
Prints a list of available firmwares. A [*] shows that the firmware is available in the offline cache.
download firmware
Downloads the specified firmware. Use the same string as you retrieved from the firmwares command described above. This command
doesn't work in offline mode.
info firmware
Shows some basic information about firmware like what it does, the latest version number, the author and the USB ID which the
USBprog device has after this firmware has been uploaded. See also the pins command.
pins firmware
This shows the PIN assignment of firmware and the meaning of the LED and jumpers. See also the info command for basic information
about the firmware.
cache clean | delete
clean deletes all old firmware versions from the firmware cache, i.e. if the latest version of a firmware is 5, then it deletes the
versions 0 to 4 if they are still on disk. The delete command deletes the whole firmware cache. Only the index and history file are
in the cache directory after executing this command.
devices
Shows a list of connected USB devices related to USBprog. The currently used update device an be set with device and is also marked
in the output.
device number | name
Sets the update device for the upload command. You have to use the integer number or the device name you retrieved from the devices
command.
upload firmware | file
Uploads a new firmware. The firmware identifier can be found with the list command. Alternatively, you can also specify a file name
on the disk. The extension doesn't matter.
FILES
~/.usbprog/version.xml
Index file, downloaded from http://www.ixbat.de/usbprog/versions.xml.
~/.usbprog/history
The saved readline(1) history.
~/.usbprog/*
The rest in that directory are firmware files. The naming scheme is name.version.
AUTHOR
The USBprog program and documentation has been written by Bernhard Walle <bernhard@bwalle.de>.
SEE ALSO
usbprog-gui(1), http://www.embedded-projects.net/index.php?page_id=135
0.2.0 2010-01-04 USBPROG(1)