Sponsored Content
Full Discussion: How to make a bootable disk?
Operating Systems Solaris How to make a bootable disk? Post 302102714 by pondlife on Friday 12th of January 2007 09:21:12 AM
Old 01-12-2007
# isainfo -kv
64-bit sparcv9 kernel modules

# uname -a
SunOS icarus 5.8 Generic_117350-27 sun4u sparc SUNW,Sun-Fire-V240

Not sure what type of disks they are but here's the partition table:

Quote:
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 1279 6.21GB (1280/0/0) 13025280
1 swap wm 1281 - 1921 3.11GB (641/0/0) 6522816
2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 1922 - 8961 34.16GB (7040/0/0) 71639040
4 usr wm 8962 - 10241 6.21GB (1280/0/0) 13025280
5 unassigned wm 10242 - 12801 12.42GB (2560/0/0) 26050560
6 var wm 12802 - 14081 6.21GB (1280/0/0) 13025280
7 unassigned wm 0 0 (0/0/0) 0
Will doing an fdisk to toggle the bootability mess up my partitions?

I get this when I try the fdisk:

# fdisk /dev/dsk/c0t2d0s0
fdisk: Cannot stat device /dev/dsk/c0t2d0s0.

Any ideas will be gratefully appreciated Smilie
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Bootable disk

I have a SCO Openserver 5.0.6 running Raid 5. and want to make a bootable disk but the boot image is 5MB ie unix file on root is around 5M and the size is obviously too large for a floppy diskette. Please help on how I can make any bootable device. The aim is to change the filesystem size. ... (6 Replies)
Discussion started by: sshokunbi
6 Replies

2. UNIX for Dummies Questions & Answers

recover DIsk and make bootable

Hello all, I'm trying to recover from backup file to a new system with a new disk. I'm able to partition my new hard drive the same way as my old drive, but I'm unable to boot off of it. I have set the fdisk to toogle as a boot flag. But it does not seem to be working. Does anyone know how to... (4 Replies)
Discussion started by: larryase
4 Replies

3. Solaris

iso files to make bootable dvd image

Hey all, I'm a newbie to iso files and I just downloaded the 2 iso files for *cough* ms2003 R2 *cough* trial software. After I downloaded the iso files I just dragged them to my burn software gui and sure enough it burned to dvd 2 iso files. When I attempted to boot the image using VMware... (0 Replies)
Discussion started by: bdsffl
0 Replies

4. Filesystems, Disks and Memory

Make non-bootable scsi drive, bootable

In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible: 1) Make the non-bootable scsi drive bootable? How? 2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive? I seek... (1 Reply)
Discussion started by: bfisk
1 Replies

5. HP-UX

Creating a bootable disk in 9.10

I am trying to copy a HP-UX disk. Both the OS and H/W are quite old HP-UX hpeval3 B.09.10 A 9000/382 080009789a46 I have a 1.5Gb disk and a new 2Gb disk. I have been using the following method to create the copy, which must be a bootable disk. #mediainit /dev/rdsk/cEd1s0 (2Gb disk) cEd0s0... (9 Replies)
Discussion started by: malcqv
9 Replies

6. Linux

Linux make bootable archive

Can anybody suggest me software to backup Linux server and to make them boot able (1 Reply)
Discussion started by: Vit0_Corleone
1 Replies

7. Fedora

make bootable usb from iso

I need to boot the ultimate boot cd from an usb stick. Do I just copy the iso image to the usb key? How do I make the usb stick bootable? (4 Replies)
Discussion started by: locoroco
4 Replies

8. UNIX for Dummies Questions & Answers

how to make pxe file bootable

hi, i recently built a pxe file the problem is I don't know how to add it in the pxe server. I was wondering if you guys know how to add my pxe file in the pxe server so that when I run the device we're using, I can go lan boot then at boot: I will just type a text and it will boot the built... (0 Replies)
Discussion started by: h0ujun
0 Replies

9. Solaris

Make an iSCSI LUN clone bootable

trying to do this for a DR situation. I've cloned an iSCSI LUN to another server. I've created an LDOM on it. set the LDOM to auto-boot=false and exported the LUN as a raw disk to the new LDOM. After starting the LDOM and telnetting to it. I can get to the OK prompt and see the disk but when I try... (2 Replies)
Discussion started by: os2mac
2 Replies

10. SuSE

How To make bootable USB with multiple ISO Files?

Hi All, I would need your assistance to make a bootable USB with SUSE LINUX Enterprise Server I have already downloaded relevant OS (Trail Version) packages @ 1) SLES-11-SP4-DVD-i586-GM-DVD1 2) SLES-11-SP4-DVD-i586-GM-DVD2 when I tried to open these packages with PowerISO one of the... (7 Replies)
Discussion started by: Leaner_963
7 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 06:53 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy