Sponsored Content
Full Discussion: How to make a bootable disk?
Operating Systems Solaris How to make a bootable disk? Post 302102714 by pondlife on Friday 12th of January 2007 09:21:12 AM
Old 01-12-2007
# isainfo -kv
64-bit sparcv9 kernel modules

# uname -a
SunOS icarus 5.8 Generic_117350-27 sun4u sparc SUNW,Sun-Fire-V240

Not sure what type of disks they are but here's the partition table:

Quote:
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 1279 6.21GB (1280/0/0) 13025280
1 swap wm 1281 - 1921 3.11GB (641/0/0) 6522816
2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 1922 - 8961 34.16GB (7040/0/0) 71639040
4 usr wm 8962 - 10241 6.21GB (1280/0/0) 13025280
5 unassigned wm 10242 - 12801 12.42GB (2560/0/0) 26050560
6 var wm 12802 - 14081 6.21GB (1280/0/0) 13025280
7 unassigned wm 0 0 (0/0/0) 0
Will doing an fdisk to toggle the bootability mess up my partitions?

I get this when I try the fdisk:

# fdisk /dev/dsk/c0t2d0s0
fdisk: Cannot stat device /dev/dsk/c0t2d0s0.

Any ideas will be gratefully appreciated Smilie
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Bootable disk

I have a SCO Openserver 5.0.6 running Raid 5. and want to make a bootable disk but the boot image is 5MB ie unix file on root is around 5M and the size is obviously too large for a floppy diskette. Please help on how I can make any bootable device. The aim is to change the filesystem size. ... (6 Replies)
Discussion started by: sshokunbi
6 Replies

2. UNIX for Dummies Questions & Answers

recover DIsk and make bootable

Hello all, I'm trying to recover from backup file to a new system with a new disk. I'm able to partition my new hard drive the same way as my old drive, but I'm unable to boot off of it. I have set the fdisk to toogle as a boot flag. But it does not seem to be working. Does anyone know how to... (4 Replies)
Discussion started by: larryase
4 Replies

3. Solaris

iso files to make bootable dvd image

Hey all, I'm a newbie to iso files and I just downloaded the 2 iso files for *cough* ms2003 R2 *cough* trial software. After I downloaded the iso files I just dragged them to my burn software gui and sure enough it burned to dvd 2 iso files. When I attempted to boot the image using VMware... (0 Replies)
Discussion started by: bdsffl
0 Replies

4. Filesystems, Disks and Memory

Make non-bootable scsi drive, bootable

In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible: 1) Make the non-bootable scsi drive bootable? How? 2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive? I seek... (1 Reply)
Discussion started by: bfisk
1 Replies

5. HP-UX

Creating a bootable disk in 9.10

I am trying to copy a HP-UX disk. Both the OS and H/W are quite old HP-UX hpeval3 B.09.10 A 9000/382 080009789a46 I have a 1.5Gb disk and a new 2Gb disk. I have been using the following method to create the copy, which must be a bootable disk. #mediainit /dev/rdsk/cEd1s0 (2Gb disk) cEd0s0... (9 Replies)
Discussion started by: malcqv
9 Replies

6. Linux

Linux make bootable archive

Can anybody suggest me software to backup Linux server and to make them boot able (1 Reply)
Discussion started by: Vit0_Corleone
1 Replies

7. Fedora

make bootable usb from iso

I need to boot the ultimate boot cd from an usb stick. Do I just copy the iso image to the usb key? How do I make the usb stick bootable? (4 Replies)
Discussion started by: locoroco
4 Replies

8. UNIX for Dummies Questions & Answers

how to make pxe file bootable

hi, i recently built a pxe file the problem is I don't know how to add it in the pxe server. I was wondering if you guys know how to add my pxe file in the pxe server so that when I run the device we're using, I can go lan boot then at boot: I will just type a text and it will boot the built... (0 Replies)
Discussion started by: h0ujun
0 Replies

9. Solaris

Make an iSCSI LUN clone bootable

trying to do this for a DR situation. I've cloned an iSCSI LUN to another server. I've created an LDOM on it. set the LDOM to auto-boot=false and exported the LUN as a raw disk to the new LDOM. After starting the LDOM and telnetting to it. I can get to the OK prompt and see the disk but when I try... (2 Replies)
Discussion started by: os2mac
2 Replies

10. SuSE

How To make bootable USB with multiple ISO Files?

Hi All, I would need your assistance to make a bootable USB with SUSE LINUX Enterprise Server I have already downloaded relevant OS (Trail Version) packages @ 1) SLES-11-SP4-DVD-i586-GM-DVD1 2) SLES-11-SP4-DVD-i586-GM-DVD2 when I tried to open these packages with PowerISO one of the... (7 Replies)
Discussion started by: Leaner_963
7 Replies
FDISK(8)						    BSD System Manager's Manual 						  FDISK(8)

NAME
acorn-fdisk -- partition editor for Acorn/RISC OS machines SYNOPSIS
acorn-fdisk -h | --help | -v | --version acorn-fdisk [-t scheme | --type scheme] -l | --list [device ...] acorn-fdisk [-t scheme | --type scheme] -s | --size partition acorn-fdisk [-t scheme | --type scheme] [device] DESCRIPTION
The acorn-fdisk utility allows one to display or interactively edit partition tables for Acorn/RISC OS machines in various formats. Using the PC/BIOS format, standard IBM PC (i386) partition tables can also be accessed. When no optional device is given, it defaults to /dev/hda or /dev/sda. The options are as follows: -h | --help Display a short usage and exit immediately. -l | --list Display the partition table(s) of all devices. -s | --size Display the size of partition. -t | --type Select the partitioning scheme to use. Valid schemes are: EESOX Eesox SCSI on the Acorn machines. ICSIDEFS ICS IDE. Filecore/Linux Linux on Filecore. This uses the non-ADFS descriptor to point to the start of the disc to be partitioned. The first two sectors contain a partition table to identify the Linux partitions contained within. PC/BIOS PC/BIOS partitioning scheme. This consists of a partition table in the first sector of the disk which contains both CHS and LBA values for the partitions. There can be up to four entries in the primary partition table. One of these can be an extended partition containing up to four extra partitions. PowerTec PowerTec SCSI on the Acorn machines. Filecore/RISCiX RiscIX on Filecore. -v | --version Display the version of acorn-fdisk and exit immediately. If neither -l | --list or -s | --size are given, the partition table of the given device will be edited interactively. EXAMPLES
Display the default device's partition table on a PC: acorn-fdisk --type PC/BIOS -l Display the PC partition table of /dev/sda: acorn-fdisk --type PC/BIOS --list /dev/sda Display the size in blocks of the partition /dev/sda1: acorn-fdisk --type PC/BIOS --size /dev/sda1 Edit the MBR partition table interactively: acorn-fdisk --type PC/BIOS Display the partition table of an MBR backed up to a file: acorn-fdisk -t PC/BIOS -l mbrdump.bin Display the size of the first partition on a device where the MBR would be restored from the backup file mbrdump.bin: acorn-fdisk -t PC/BIOS -s mbrdump.bin1 AUTHORS
arm-fdisk was written by Russell King <rmk@arm.uk.linux.org> based on util-linux fdisk, which was written at least partially by A. V. Le Blanc <LeBlanc@mcc.ac.uk>. This manual page was written for the Debian system by Thorsten Glaser <tg@debian.org> but may be used by others. BSD
October 2, 2010 BSD
All times are GMT -4. The time now is 10:15 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy