Hey Guys,
Wondering if there is a way to do the following
I have a file called test.txt
abc
def
abc
abc
def
I have a pattern file called pattern.txt containing the following
abc
def
I want to do a count, but have it display the count value preceeding each line like grep -n (2 Replies)
I have a file from which I need to collect lines to another file. I know how to use 'grep' for this, but I don't know how to do when I wan't several lines after the search word, and the amount of lines I need varies from case to case.
The file I search in looks something like this:
>8534734... (9 Replies)
Hello,
How do I use grep to find a pattern in a list of file and then display 5 lines after the pattern is matched
Eg:
I want to match the string GetPresentCode in all files in a folder and then see 4 lines following this match. I am not sure if grep is what should be used to achieve. Thanks!... (3 Replies)
I have to grep on a few words in a file and then display the line containing those words and the line above it.
For ex -
File1.txt contains...
abc xyz abc
This is a test
Test successful
abc xyz abc
Just a test
Test successful
I find the words 'Test successful' in the file... (6 Replies)
Hello everyone.
I would like to know if I can use grep or zgrep to search for a particular pattern then print the x number of lines after the pattern was found.
Lets say for example a pattern was found on line 3, I wanted the output to show lines 3, 4 and 5.
Thanks! (10 Replies)
Hi,
I wanted to grep string "ERROR" and "WORNING" after last occurrence of String "Starting" only and wanted to display two lines after searched ERROR and WORNING string and one line before. I have following cronjob log file "errorlog" file and I have written the code for same in Unix as below... (17 Replies)
Hi,
Need help to grep the following from a file x. I just want to grep exact match not lines and not partial word.
CONFSUCCESS
CONFFAIL
CONFPARTIALSUCCESS
>cat x
xczxczxczc zczczcxx CONFSUCCESS czczczcczc
czxxczxzxczcczc CONFFAIL xczxczcxcczczc
zczczczcz CONFPARTIALSUCCESS czczxcxzc
... (4 Replies)
Hi I need to grep for a patter and display all lines below the pattern.
For ex: say my file has the below lines
file1
file2
file3
file4
file5
I NEED to grep for patter file3 and display all lines below the pattern. do we have an option to get this data. Let me know if you require... (5 Replies)
Hi guys,
I have a log file that generates multiple logs about a query.
<query time='2016-04-13 13:01:50.825'>
<PagingRequestHandler>
<Before>brand:vmu</Before>
<After>brand:vmu</After>
</PagingRequestHandler>
<GroupDeviceFilterHandler>
<Before>brand:vmu</Before>
... (3 Replies)
hi,
I have a log file with data for more than 3 years, i want only the rows for the year 2017, say for example.
My file has the data like this
08-OCT-2015 11:17:35 AAA, BBBB
08-OCT-2017 11:17:35 AAA,Bdfdfd,dfdfd,dfd
08-Nov-2017 11:17:35 AAA,Bdfdfd,dfdfd,deree
i want the rows... (2 Replies)
Discussion started by: skoshekay
2 Replies
LEARN ABOUT DEBIAN
digitemp
DIGITEMP(1) General Commands Manual DIGITEMP(1)NAME
digitemp - program to read from temperature sensors.
SYNOPSIS
digitemp [options]
DESCRIPTION
DigiTemp uses the Dallas 1-wire bus to read temperatures from digital sensors attached to a serial port adapter. It handles initializing
the bus, searching for attached devices, reading devices and custom log strings. It suports the following temperature devices: DS1820,
DS18S20, DS18B20, DS1822
It also handles the DS2406 1-wire hub switches, and DS2422 and DS2423 counters.
DigiTemp uses either the DS9097 passive serial port adapter, or the DS2480B based DS9097U adapter (recommended).
OPTIONS
At least 1 action must be given, along with some optional arguments. Actions are one (and only on) of the -w -t -a -w options
-h, -? Show summary of options.
-v Show verbose output.
-i Initialize .digitemprc file, search the bus for all supported devices.
-w Walk the full device tree and display the serial number and type of all devices detected on the bus.
-s /dev/ttyS0
Set serial port to use. Make sure you have permission to access this port.
-l /var/log/temperature
Send output to logfile, the output format is defined by the .B -o command
-c digitemp.conf
Set digitemp configuration file. The default is .digitemprc in the current directory.
-r 1000
Read delay in ms. This sets the amount of time to wait between sending the temperature conversion command and reading the result.
The DS18S20 takes about 750mS to do the temperature conversion. Default is 1000mS (1 sec).
-t # Read sensor number #, the # depends on the order of the sensors in the .digitemprc file.
-q Quiet output, no copyright banner.
-a Read all sensors.
-A Treat DS2438 as A/D converter, output raw voltages
-d 5 Delay between samples (in seconds).
-n 50 Number of times to repeat the command.
-O"counter format string"
See Counter Format below.
-o [1..3] ["output format string"]
See Temperature Format below.
-H"Humidity format string"
See Humidity Format below.
Temperature Format
The temperature format can be either a numeric value, or a string. The numeric values select pre-configured output formats:
1 = One line per sensor, time, C, F (default)
2 = One line per sample, elapsed time, temperature in C
3 = Same as #2, except temperature is in F
#2 and #3 have the data separated by tabs, suitable for import into a spreadsheet or other graphing software.
The format string uses strftime tokens plus 5 special ones for DigiTemp:
%s for sensor #
%C for centigrade
%F for fahrenheit
%R to output the hex serial number
%N for seconds since Epoch.
The case of the token is important! The default format string is: "%b %d %H:%M:%S Sensor %s C: %.2C F: %.2F" which gives you an output of:
May 24 21:25:43 Sensor 0 C: 23.66 F: 74.59
The DS2438 sensor can be used for a variety of things. It includes a temperature sensor and A/D converter. DigiTemp defaults to using it as
a humidity sensor. The raw voltages can be displayed by passing the -A argument
When the -o2 or -o3 log options are used the attached DS2438's temperatures will be output without the humidity.
Counter Format String
The counter format string is similar, adding these tokens:
%n is the counter #, which depends on its position in the .digitemprc file
%C is the count in decimal.
Humidity Format String
The Humidity format string is the same as the temperature format string with the addition of this format specifier:
%h is the humidity in 0-100%
AUTHOR
This manual page was written by Jesus Roncero <jesus@roncero.org>, for the Debian project (but may be used by others). Modifications by
Brian C. Lane <bcl@brianlane.com>
UPDATES
DigiTemp updates can be found on the http://www.digitemp.com website.
June 2005 DIGITEMP(1)