Accessing linux via telnet Post: 302100811

10 More Discussions You Might Find Interesting

1. IP Networking

Problem accessing network using Linux

Ok, here at work, we have Windows computers which login into a MS domain server. Some of us also have Linux boxes which get a ip address from the dhcp server. We can see other boxes and see the internet until about 1 week ago. Now, we still get a ip address but can't see anything within our...

2. Linux

Accessing FTP on Linux

Hi, I've setup an FTP server on my linux box (RH 9.0). I've configured so the vsftpd daemon is running in runlevel 5, etc. However, I have difficulty logging-on, as it will not authenticate any valid user (inlcuding anoymous). Everything seems ok in the /etc/vsftpd/vsftp.d.conf and...

3. IP Networking

Accessing a FTP Server hosted on Linux

We have set-up a FTP server on a Linux machine, which sits behind a firewall. Most users outside our firewall can access it, but one user in particular cannot. I assume it has something to do with their firewall rules. It appears that they can connect with no problem but the server does not grant...

4. Linux

Telnet in redhat linux

Hi, I just want to access linux machine from windows telnet client.What is the procedure?How do i start telnet server in Linux,where to check if it is installed. Please help

5. UNIX for Dummies Questions & Answers

Accessing UNIX Data over LINUX

Hello! Unfortunatly i'm totaly new with UNIX and LINUX... Actually Problem is i have some data on floppy disk which was written on UNIX system 5 version now i have installed LINIX ver 9 is there any way i can access unix data on linux 9? if so please reply me with commands i shall be very...

6. Solaris

accessing the gui when using telnet

Hey guys, I am fairly new to unix, but I seem to be a quick learner. anyway I need some help, how do you access the GUI when you telnet in to a system running x86 solaris 8? dtlogin doesnt work, and I am a super user. thanks

7. Red Hat

accessing windows 2k3 partition from Linux Advance Server 3

Dear all i hav dual operating system ie windows 2003 and Red Hat Advance Server3 trying to mount windows partition on linux operating system using the following method 1)mkdir /mnt/windows 2)mount -t ntfs /dev/hda1 /mnt/windows mount: fs type ntf not supported by kernel and my kernel...

8. UNIX for Dummies Questions & Answers

Looking for application that simplifies for non techie people accessing unix/linux env

Hello all I searched the net but didn't found any application that wrap ssh connection with GUI interface so that non techie people can connect to unix/linux accounts and work with files , so it will looks like there familiar Microsoft windows directory structure . Please don't answer with .....

9. Linux

Problem in accessing Oracle Database Server from Linux Machine

I am facing a strange issue in connecting to Oracle database from Linux Machine - The connectivity is not failing all the time , the failure to success ratio is 1:70. - Error "ORA-12545: Connect failed because target host or object does not exist" - Majority of the time the connection...

10. Programming

Accessing directories in Linux

I'm new to Linux and trying to port a c++ program from windows. what I'm trying to do is copy a file to a directory off the root of the drive First off the program is located and running from Drive:\Base\Web\Today\Program.exe And trying to copy to: Drive:\Base\cpics windows...

LEARN ABOUT SUSE

virt-viewer

VIRT-VIEWER(1)						User Contributed Perl Documentation					    VIRT-VIEWER(1)

NAME

       virt-viewer - display the graphical console for a virtual machine

SYNOPSIS

       virt-viewer [OPTIONS] DOMAIN-NAME|ID|UUID

DESCRIPTION

       virt-viewer is a minimal tool for displaying the graphical console of a virtual machine. The console is accessed using the VNC protocol.
       The guest can be referred to based on its name, ID, or UUID. If the guest is not already running, then the viewer can be told to wait until
       is starts before attempting to connect to the console The viewer can connect to remote hosts to lookup the console information and then
       also connect to the remote console using the same network transport.

OPTIONS

       The following options are accepted when running "virt-viewer":

       -h, --help
	   Display command line help summary

       -V, --version
	   Display program version number

       -v, --verbose
	   Display information about the connection

       -c URI, --connect=URI
	   Specify the hypervisor connection URI

       -w, --wait
	   Wait for the domain to start up before attempting to connect to the console

       -w, --reconnect
	   Automatically reconnect to the domain if it shuts down and restarts

       -d, --direct
	   Do not attempt to tunnel the console over SSH, even if the main connection URI used SSH.

EXAMPLES

       To connect to the guest called 'demo' running under Xen

	  virt-viewer demo

       To connect to the guest with ID 7 running under QEMU

	  virt-viewer --connect qemu:///system 7

       To wait for the guest with UUID 66ab33c0-6919-a3f7-e659-16c82d248521 to startup and then connect, also reconnecting upon restart of VM

	  virt-viewer --reconnect --wait 66ab33c0-6919-a3f7-e659-16c82d248521

       To connect to a remote console using TLS

	  virt-viewer --connect xen://example.org/ demo

       To connect to a remote host using SSH, lookup the guest config and then make a direct non-tunnelled connection of the console

	  virt-viewer --direct --connect xen+ssh://root@example.org/ demo

AUTHOR

       Written by Daniel P. Berrange, based on the GTK-VNC example program gvncviewer.

BUGS

       Report bugs to the mailing list "http://www.redhat.com/mailman/listinfo/et-mgmt-tools"

COPYRIGHT

       Copyright (C) 2007-2008 Red Hat, Inc, and various contributors.	This is free software. You may redistribute copies of it under the terms
       of the GNU General Public License "http://www.gnu.org/licenses/gpl.html". There is NO WARRANTY, to the extent permitted by law.

SEE ALSO

       virsh(1), "virt-manager(1)", the project website "http://virt-manager.org"

perl v5.12.1							    2010-01-15							    VIRT-VIEWER(1)