prtconf(1M)															       prtconf(1M)

NAME

       prtconf - print system configuration

SYNOPSIS

       /usr/sbin/prtconf  [-V] | [-F] | [-x] | [-bpv] | [-acDPv] [dev_path]

       The  prtconf  command prints the system configuration information. The output includes the total amount of memory, and the configuration of
       system peripherals formatted as a device tree.

       If a device path is specified on the command line for those command options that can take a device path, prtconf will only display informa-
       tion for that device node.

       The following options are supported:

       -a	Display all the ancestors device nodes, up to the root node of the device tree, for the device specified on the command line.

       -b	Display the firmware device tree root properties for the purpose of platform identification. These properties are "name", "compat-
		ible", "banner-name" and "model".

       -c	Display the device subtree rooted at the device node specified on the command line, that is,  display  all  the  children  of  the
		device node specified on the command line.

       -D	For each system peripheral in the device tree, displays the name of the device driver used to manage the peripheral.

       -F	Returns  the  device path name of the console frame buffer, if one exists. If there is no frame buffer, prtconf returns a non-zero
		exit code. This flag must be used by itself. It returns only the name of the console, frame buffer device or a non-zero exit code.
		For example, if the console frame buffer on a SUNW,Ultra-30 is ffb, the command returns: /SUNW,ffb@1e,0:ffb0. This option could be
		used to create a symlink for /dev/fb to the actual console device.

       -p	Displays information derived from the device tree provided by the firmware (PROM) on SPARC platforms  or  the  booting	system	on
		platforms.The  device  tree  information  displayed using this option is a snapshot of the initial configuration and may not accu-
		rately reflect reconfiguration events that occur later.

       -P	Includes information about pseudo devices. By default, information regarding pseudo devices is omitted.

       -v	Specifies verbose mode.

       -V	Displays platform-dependent PROM (on SPARC platforms) or booting system (on  platforms) version information.  This  flag  must	be
		used by itself. The output is a string. The format of the string is arbitrary and platform-dependent.

       -x	Reports  if  the  firmware on this system is 64-bit ready. Some existing platforms may need a firmware upgrade in order to run the
		64-bit kernel. If the operation is not applicable to this platform or the firmware is already 64-bit ready, it exits silently with
		a  return  code  of  zero.  If	the  operation	is applicable to this platform and the firmware is not 64-bit ready, it displays a
		descriptive message on the standard output and exits with a non-zero return code. The  hardware  platform  documentation  contains
		more information about the platforms that may need a firmware upgrade in order to run the 64-bit kernel.

		This flag overrides all other flags and must be used by itself.

       The following operands are supported:

       dev_path 	       The  path  to  a  target  device  minor node, device nexus node, or device link for which device node configuration
			       information is displayed

       The following exit values are returned:

       0	       No error occurred.

       non-zero        With the -F option (SPARC only), a non-zero return value means that the output device is not a frame buffer.  With  the	-x
		       option,	a  non-zero  return value means that the firmware is not 64-bit ready. In all other cases, a non-zero return value
		       means that an error occurred.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWesu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Unstable			   |
       +-----------------------------+-----------------------------+

       fuser(1M), modinfo(1M), sysdef(1M), attributes(5)

       Sun Hardware Platform Guide

   SPARC Only
       openprom(7D)

       The output of the prtconf command is highly dependent on the version of the PROM installed in the system. The output will  be  affected	in
       potentially all circumstances.

       The  driver  not attached message means that no driver is currently attached to that instance of the device. In general, drivers are loaded
       and installed (and attached to hardware instances) on demand, and when needed, and may be uninstalled and unloaded when the device  is  not
       in use.

       On   platforms,	the  use of prtconf -vp provides a subset of information from prtconf -v. The value of integer properties from prtconf -vp
       might require byte swapping for correct interpretation.

								    9 Aug 2005							       prtconf(1M)