12-02-2006
Download and install sun explorer, then run an explorer when the first message appears.
For sendmail there a innumerable tutorial on the web if you search for them.
8 More Discussions You Might Find Interesting
1. Solaris
Hi,
I'm working with an E450 server and it has one network card configured with 2 local and internet IP addresses.
Presently, the local IP is set as the primary address while teh Internet IP is set as the secondary address. I wish to change this and make the local IP secondary and the... (2 Replies)
Discussion started by: Ronny
2 Replies
2. Solaris
Hi all
I have a SUN V480 server with 4 processores and I've noticed that the temperature for 2 of the 4 processers are quite high (63 degrees Celsius).
Does anyone know what the operating temperatures of the Sparc CPU's are? I'm not getting any warning messages yet, but I want to resolve the... (3 Replies)
Discussion started by: soliberus
3 Replies
3. Solaris
Hi,
I have a NETRA 240 server wich should work on high temperature environment (up to 50 deg celsius). After reaching ~48 deg, the system is shuting down.
The HighShutDownThreshold of the CPU is set to 89 deg
The PowerOffThreshold of the CPU is set to 96 deg
Please help me to change these... (2 Replies)
Discussion started by: Danielz
2 Replies
4. Solaris
How to get a CPU temperature and current power consumption in T5220 server both from system controller and Operating system. I need details by cores. Thanks in advance. (13 Replies)
Discussion started by: fugitive
13 Replies
5. Solaris
Hello all,
I am using prtdiag -v command to find the temperature sensors . And i dont see the following o/p .
ystem Configuration: Hewlett-Packard HP Z400 Workstation
BIOS Configuration: Hewlett-Packard 786G3 v01.17 08/19/2009
==== Processor Sockets ====================================
... (2 Replies)
Discussion started by: b.preeya22
2 Replies
6. UNIX for Advanced & Expert Users
I have TXT files to process but they contain the degree symbols in them due to which the processing program fails on these files. I want a unix command that will remove the degree symbols from these files.
I tried using the sed command: sed 's///g' filename but it did not work. This issue... (14 Replies)
Discussion started by: khedu
14 Replies
7. Hardware
What is the max operating temperature for 'UltraSPARC IIIi 1 GHz' ?
thanks. (1 Reply)
Discussion started by: orange47
1 Replies
8. Shell Programming and Scripting
I have a file with two columns and each pair in the rows denote 2 connected nodes in the network file, edge_list.txt. Given a query file, input.txt, I want to retrieve the nodes that are directly connected (first degree neighbors) to the nodes present in the input.txt. Kindly help.
... (3 Replies)
Discussion started by: Sanchari
3 Replies
LEARN ABOUT NETBSD
amdtemp
AMDTEMP(4) BSD Kernel Interfaces Manual AMDTEMP(4)
NAME
amdtemp -- AMD CPU on-die digital thermal sensor
SYNOPSIS
amdtemp* at pchb?
DESCRIPTION
The amdtemp driver provides support for the on-die digital thermal sensor present on AMD K8, AMD Barcelona, AMD Phenom, AMD Griffin, and AMD
Fusion CPUs.
These sensors were officially introduced in AMD K8 Revision F processors, and provide 0.5 degC accuracy. Precision was improved in Revision
G chips, which provide two more bits for 0.25 degC steppings. Each core has two temperature sensors, and there are up to two cores per CPU
socket.
AMD Barcelona, AMD Phenom, AMD Griffin, and AMD Fusion provide 0.125 degC accuracy and provide one temperature sensor for each CPU socket.
The amdtemp driver reports temperatures through the envsys(4) API.
Sensor Units Typical Use
CPUN sensor0 uK cpuN temperature
SEE ALSO
envsys(4), envstat(8), powerd(8)
HISTORY
The amdtemp driver first appeared in OpenBSD 4.4 named ``kate''. It was then ported to NetBSD 5.0. The driver has been renamed with support
for newer AMD CPUs.
AUTHORS
The amdtemp driver was written by Constantine A. Murenin <cnst@openbsd.org> whilst at the University of Waterloo. It was adapted to NetBSD
by Christoph Egger.
BSD
March 2, 2012 BSD