Sponsored Content
Operating Systems Solaris Can this be disabled? interface turned of when console cable plugged in. Post 302098106 by System Shock on Thursday 30th of November 2006 04:17:31 PM
Old 11-30-2006
Ok, so let me get this straight...

You plug in the cable, and you run hyperterminal ( I take it you are using a laptop/WS with Windows?).

When hyperterminal comes up, are you getting an ok prompt or a login prompt?

If you are getting an ok prompt, then you are sending a break signal to the box, which is bringing the whole box to a halt, not just your interface.
 

9 More Discussions You Might Find Interesting

1. HP-UX

Root account disabled and unable to access console

Hi, hope someone could help me here: Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a... (2 Replies)
Discussion started by: AaronC
2 Replies

2. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks (2 Replies)
Discussion started by: waterbear
2 Replies

3. UNIX for Advanced & Expert Users

Detecting USB Flash Devices (plugged and hot-plugged)

I am trying to script the process of looking for a usb-key inside another application. I have gotten some success by recording "ls /dev" and comparing it to a new "ls /dev" periodically. However this has made it so I have to prompt the user to take out the usb-key (if plugged in), let my... (1 Reply)
Discussion started by: jjinno
1 Replies

4. AIX

need AIX console cable

Hello ... I am newbie and will be very grateful for any help. I need a serial console cable for my AIX boxes (seems we have lost the one we had!). However I am confused about the one one to order - UK based if possible. I wonder if anyone can point me at a specific one or the exact spec i need to... (0 Replies)
Discussion started by: tim441
0 Replies

5. AIX

RJ-45 Console Cable Pinout

Does anyone have the pinout for the front RS-232 RJ-45 Port on IBM Power Server 5, 9131-52A? Of course the cabel is straight through, but on the DB9 side is what I need. (2 Replies)
Discussion started by: mrmurdock
2 Replies

6. Shell Programming and Scripting

how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable

hi, how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable which needs to be connected to one console server having rj11 on its side and db 9 female on other end.i.e. on switch side,console cable has rj45 and db 9 pin female connector on other side of... (1 Reply)
Discussion started by: pankajd
1 Replies

7. Red Hat

Different hostnames with reboot while lan cable, no lan cable

I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable Reboot with lan cable: The hostname is ubunut Unable to connect Oracle database using sqlplus some times database is not... (2 Replies)
Discussion started by: LinuxLearner
2 Replies

8. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a... (7 Replies)
Discussion started by: samer.odeh
7 Replies

9. Solaris

/var/adm/messages (interface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# cat /var/adm//messages Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved Apr 20 08:24:18 Prod-App1... (0 Replies)
Discussion started by: javeedkaleem
0 Replies
XHPPrompt(3X)															     XHPPrompt(3X)

NAME
XHPPrompt - Send a prompt to an extended input device. SYNOPSIS
#include <X11/XHPlib.h> int XHPPrompt (display, deviceid, prompt) Display *display; XID deviceid; unsigned int prompt; ARGUMENTS
display Specifies the connection to the X server. deviceid Specifies the ID of the desired device. Prompt Specifies the Prompt to be sent. Valid values are: GENERAL_PROMPT, PROMPT_1, PROMPT_2, PROMPT_3, PROMPT_4, PROMPT_5, PROMPT_6, PROMPT_7. DESCRIPTION
This request is part of an HP-proprietary extension to X. Its functionality has been superseded by the standard X input device extension XChangeFeedbackControl request. You should use XChangeFeedbackControl instead of XHPPrompt if possible. This request sends a prompt to an input device. A prompt is an audio or visual indication that the program controlling the input device is ready for input. The program may indicate that status by turning on a prompt on the appropriate input device. Not all input devices support prompts and acknowledges. Any device that does support a particular prompt will also support the corresponding acknowledge. To determine whether an input device supports a particular prompt and acknowledge, the io_byte field of the XHPDeviceList structure should be examined. The format of this structure is described in the documentation for the XHPListInputDevices request. RETURN VALUE
none DIAGNOSTICS
BadDevice An invalid device ID was specified. BadValue An invalid prompt was specified. FILES
/usr/include/X11/XHPlib.h ORIGIN
Hewlett-Packard Company SEE ALSO
XHPListInputDevices(3x) XHPAcknowledge(3x) X Version 11 Release 5 XHPPrompt(3X)
All times are GMT -4. The time now is 07:53 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy