hi,
i created a partition c1t0d0s5 sized 10gb and a soft partition on it. now i want to expand this size to 15gb (my hard disk is 36gb). anybody show me the way to do that, please.
here are the outputs of the df and format commands:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> os
/pci@1c,600000/scsi@2/sd@0,0
Specify disk (enter its number): 0
selecting c1t0d0: os
[disk formatted]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Volume: os
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 17531 - 24619 9.77GB (7089/0/0) 20480121
1 swap wu 0 - 1088 1.50GB (1089/0/0) 3146121
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 unassigned wm 1125 - 1266 200.31MB (142/0/0) 410238
4 unassigned wm 1267 - 4896 5.00GB (3630/0/0) 10487070
5 unassigned wm 4897 - 12156 10.00GB (7260/0/0) 20974140
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 1089 - 1124 50.78MB (36/0/0) 104004
partition>
Dear all, How can we increase the space for the root partition, ensuring that there is no loss of data in Solaris 9. How can the growfs command be utilized in this case.
Thanks. (7 Replies)
Hi guys,
I have an V100 server and I'm about to install solaris 8 on it (I have 10 on currently but most of my work is on 8 so I'm going to that).
It would be easy for me to post system specs and get a recommendation, but what I'd like is to know HOW to calculate so that I can set up other... (1 Reply)
Hi
we have a sunfire v880 server . we have a problem with root partion it showing 90% full. so anyone can help me how to increase the size of that partion.
NOTE: It is not in veritas & SVM control.
Regards
prakash (6 Replies)
hi
I am trying to create primary,extended and logical partitions.
when I try to create a primary partition, I can give it maximum 1027M (1gb). Why? (9 Replies)
Experts,
I want to know how to increase partion size in Hp-ux.Actually we installed oracle in separate part ion.As increase of database went to 99% :eek:.What ever data which is in it is important.so i dont want to delete any data in that partion.Now the size of that is 250 GB.I want the same to... (2 Replies)
Dear All
For installing an application that will seat under /opt , I need to increase my root partition size (/c0t0d0s0) . Can you please let me know how can I increase this partition size?
Thank you (10 Replies)
Dear All,
I need notification mail from server while device size crossed 80% approximately.I tried following shell .its working fine when the device name like /dev/sdc1 etc.Its not working in LVM name.For example
Script:
#!/bin/sh
echo "Storage server space details";
df -H | grep -vE... (4 Replies)
hi want to schedule a script for displaying the size of the partiition.
For example
df -g
/dev/fslv03 2000.00 535.43 74% 179943 1% /nvbkp
we have several mount point like this but i want to schedule script to display size of the above mount point only.
Thanks
Ankit (4 Replies)
Dear All ,
We need to increase the size of the root partition in a RHEL server.
The model is Product Name: SUN FIRE X4170 SERVER.
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
119G 47G 67G 41% /... (3 Replies)
Discussion started by: jegaraman
3 Replies
LEARN ABOUT NETBSD
svhlabel
SVHLABEL(8) BSD System Manager's Manual SVHLABEL(8)NAME
svhlabel -- update disk label from SGI Volume Header
SYNOPSIS
svhlabel [-fqrw] device
DESCRIPTION
svhlabel is used to update a NetBSD disk label from the Silicon Graphics Volume Header on disks that were previously used on IRIX systems.
svhlabel scans the Volume Header contained in the first blocks of the disk and generates additional partition entries for the disk from the
entries found.
Each Volume Header entry which does not have an equivalent partition in the disk label (equivalent in having the same size and offset) is
added to the first free partition slot in the disk label. A free partition slot is defined as one with an fstype of 'unused' and a size of
zero ('0'). If there are not enough free slots in the disk label, a warning will be issued.
The raw partition (typically partition c, but d on i386 and some other platforms) is left alone during this process.
By default, the proposed changed disk label will be displayed and no disk label update will occur.
Available options:
-f Force an update, even if there has been no change.
-q Performs operations in a quiet fashion.
-r In conjunction with -w, also update the on-disk label. You probably do not want to do this.
-w Update the in-core label if it has been changed.
SEE ALSO disklabel(8), dkctl(8), mount_efs(8), sgivol(8)HISTORY
The svhlabel command appeared in NetBSD 5.0.
BSD February 26, 2007 BSD