11-24-2006
Really it shouldn't matter. If the protocol is correct and the machine is capable of booting from that protocol, then it shouldn't matter what you use. I generally just use whatever is lying around, sometimes it's old sun stuff sometimes not, it really doesn't matter.
Do you really even need to use a CD or DVD? I deal with a large number of servers, and never use CDs or DVDs in the datacenter. Media is loaded onto a single provisioning server and from there is installed on any, and all, other systems whether this is bare metal or otherwise.
10 More Discussions You Might Find Interesting
1. Solaris
Netra T1 running Solaris 2.6 with following DVD installed:
c0t6d0 Soft Errors: 131 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1401 Revision: 1007
I know the cdrw command isn't in Solaris until version 8 and DVD is suppose to be udfs (not supported... (3 Replies)
Discussion started by: RTM
3 Replies
2. Solaris
Is there a way to install Solaris 10 x86 with an external DVD drive that connects through the USB port? I would think I would run GRUB off of a floppy disk and somehow use that to make it look to the USB port to boot from but I don't know how to do that. Can anyone help me out? (1 Reply)
Discussion started by: Bradj47
1 Replies
3. Solaris
Hey all.
Wondering - I have a pair of V245's with no internal CD/DVD-ROM drives, and I want to install the latest/greatest Solaris 10.
Booting these machines with an external drive plugged in via USB does no good.
Is jumpstart or installing internal drives the only alternative?
I'm a... (1 Reply)
Discussion started by: b1f30
1 Replies
4. Solaris
Hello,
I need to replace a cd rom drive with a dvd rom drive in a SunFire v120 running Solaris 8. My objective is to install Solaris 10 from dvd disc. Downloading Solaris 10 cd discs is not an option since I am in Baghdad, Iraq and connection speeds are horrible. So far, all I can get is power to... (9 Replies)
Discussion started by: 555
9 Replies
5. HP-UX
Please help me >
How to diag the external DVD-ROM drive issue whether it is working or not? on HP 9000 server rp7400
I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device only showing all disks >... (0 Replies)
Discussion started by: tpuser
0 Replies
6. UNIX for Advanced & Expert Users
old clunker - rp74000
How to diag the external DVD-ROM drives issue whether it is working or not? on HP 9000 server rp7400
Please help me > I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device... (1 Reply)
Discussion started by: tpuser
1 Replies
7. Solaris
Hi All,
I'm a total noob when it comes to troubleshooting Sun hardware issues, however, I've been tasked with just a task. How can I verify if the DVD rom is working in a Sun system? We've put in the dvd, but can't do anything. This is from command line.
Thanks.
---------- Post updated at... (1 Reply)
Discussion started by: bbbngowc
1 Replies
8. Solaris
Is there anyway to get a USB DVD ROM to work on a V210/V240/V440 SPARC systems for initial installation? I'm drawing a blank and I can't seem to find any documentation on this. (3 Replies)
Discussion started by: adelsin
3 Replies
9. AIX
I was having problems with the DVD-ROM drive not being recognized. I thought it was a configuration issue, but it appears to be a hardware problem. Now the system hangs at boot. This last time I tried it, it said:
At which point, it hangs. (1 Reply)
Discussion started by: smithfarm
1 Replies
10. Hardware
Here is my conundrum . I am unable to access my cd or dvd
after I supposedly alter the BIOS setting to enable a "Live"
CD or DVD to be used.
Would ,changing the Hard Drive or Motherboard remedy the situation.
Thanking you,
katosan:wall::wall: (2 Replies)
Discussion started by: katosan
2 Replies
SLIST(1) slist SLIST(1)
NAME
slist - Lists available NetWare Servers
SYNOPSIS
slist [ pattern ]
DESCRIPTION
slist lists all NetWare Servers available in your network.
If slist does not print to a tty, the decorative header line is not printed, so that you can count the servers on your network by doing
slist | wc -l
OPTIONS
pattern
pattern is used to list only servers whose names match the specified pattern. For a server to be listed, the pattern must match the full
server name. You can use wildcards for the pattern, but you must protect these wildcards from any command line expansion by quoting.
Case doesn't matter.
EXAMPLE
slist "I*"
or
slist "i*"
List all available Netware servers on your Network, that begin with an "I".
SEE ALSO
ncpmount(8), ncpumount(8), pqlist(1), nprint(1)
CREDITS
slist was written by Volker Lendecke (lendecke@math.uni-goettingen.de)
BUGS
slist works only in IPX environment, as it uses SAP to find first server and then Bindery to get list of servers.
slist 01/07/1996 SLIST(1)