hi All
I have one RP 3410 server with hp-ux 11.23 mirror disk
it's lvdislay -v /dev/vg00/lvol4 shows stale in some location
Actual is current
pls help me to resolve the probem
I have check with lvsync command and vgsync
but not working
re
Rajesh (1 Reply)
There are a filesystem /GWD/appbase/projects/GRIDDB
Under this filesystem there is a directory called backup.
But When I am trying to access the backup directory ,it is showing me the following error:
# cd /GWD/appbase/projects/GRIDDB
# cd backup
-bash: cd: backup: Stale NFS file handle
... (3 Replies)
hi,
in my pc linux and windows was there with 2 hdd in raid.i removed linux partititons.Now my ps is not booting giving grub error 22.Nothing works.I hace my data in windows.Hard disks are RAID.when tried to go to recovery mode from windoes boot cd,it says hard disk not detected.when tried with... (2 Replies)
HP-UX B.11.23 U ia64
I've got two users that show in "w" with long idle times but if I search for their processes I find nothing (ps -ef | grep username )
I'm not sure why "w" still sees them and if there is anything (short of a reboot) that I can do to clean them out.
Ideas? (8 Replies)
Any package that I try to install, is giving an error of 'lock':
# pkgadd -d openssl-1.0.0g-sol10-sparc-local
The following packages are available:
1 SMCossl openssl
(sparc) 1.0.0g
Select package(s) you wish to process (or 'all' to process
all packages).... (2 Replies)
Hello,
I have an ancient HP-UX 11.11 system where I have a logical volume marked stale and I can't get it sync'd. I have tried lvsync and lvreduce/lvextend to no avail. It is just one 4Mb PE on the disk that I can't get current.
# lvdisplay -v /dev/vg00/lvol5 | grep stale
LV Status ... (17 Replies)
Hi friends,
the paging lv hd6 is in stale condition
hd6 paging 48 96 2 open/stale N/A
And i'am getting the following alerts in the server 333BD283 0811044814 U S LVDD Bad block detected with no relocation al
333BD283 0811041114 U S LVDD ... (1 Reply)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirror. After problem with SAN pathing of our one Datacenter, I have LV at stale state.
# lsvg cpsdata2vg
VOLUME GROUP: cpsdata2vg VG IDENTIFIER: 00fb518c00004c0000000169445f4c2c
VG STATE: ... (6 Replies)
Discussion started by: Necronomic
6 Replies
LEARN ABOUT HPUX
vx_emerg_start
vx_emerg_start(1M)vx_emerg_start(1M)NAME
vx_emerg_start - start Veritas Volume Manager from recovery media
SYNOPSIS
vx_emerg_start [-m] [-r root_daname] hostname
DESCRIPTION
The vx_emerg_start utility can be used to start Veritas Volume Manager (VxVM) when a system is booted from alternate media, or when a sys-
tem has been booted into Maintenance Mode Boot (MMB) mode. This allows a rootable VxVM configuration to be repaired in the event of a cat-
astrophic failure.
vx_emerg_start verifies that the /etc/vx/volboot file exists, and checks the command-line arguments against the contents of this file.
OPTIONS -m Mounts the root file system contained on the rootvol volume after VxVM has been started. Prior to being mounted, the rootvol volume
is started and fsck is run on the root file system.
-r root_daname
Specifies the disk access name of one of the members of the root disk group that is to be imported. This option can be used to spec-
ify the appropriate root disk group when multiple generations of the same root disk group exist on the system under repair. If this
option is not specified, the desired root disk group may not be imported if multiple disk groups with the same name exist on the sys-
tem, and if one of these disk groups has a more recent timestamp.
ARGUMENTS
hostname
Specifies the system name (nodename) of the host system being repaired. This name is used to allow the desired root disk group to be
imported. It must match the name of the system being repaired, as it is unlikely to be recorded on the recovery media from which you
booted the system.
NOTES
HP-UX Maintenance Mode Boot (MMB) is intended for recovery from catastrophic failures that have prevented the target machine from booting.
If a VxVM root volume is mirrored, only one mirror is active when the system is in MMB mode. Any writes that are made to the root file sys-
tem in this mode can corrupt this file system when both mirrors are subsequently configured.
The vx_emerg_start script allows VxVM to be started while a system is in MMB mode, and marks the non-boot mirror plexes as stale. This
prevents corruption of the root volume or file system by forcing a subsequent recovery from the boot mirror to the non-boot mirrors to take
place.
USAGE
After VxVM has been started, various recovery options can be performed depending on the nature of the problem. It is recommended that you
use the vxprint command to determine the state of the configuration.
One common problem is when all the plexes of the root disk are stale as shown in the following sample output from vxprint:
v rootvol root DISABLED 393216 - ACTIVE -
pl rootvol-01 rootvol DISABLED 393216 - STALE -
sd rootdisk01-02 rootvol-01 ENABLED 393216 0 - -
pl rootvol-02 rootvol DISABLED 393216 - STALE -
pl rootvol-02 rootvol DISABLED 393216 - STALE -
sd rootdisk02-02 rootvol-02 ENABLED 393216 0 - -
In this case, the volume can usually be repaired by using the vxvol command as shown here:
vxvol -g 4.1ROOT -f start rootvol
If the volume is mirrored, it is put in read-write-back recovery mode. As the command is run in the foreground, it does not exit until the
recovery is complete. It is then recommended that you run fsck on the root file system, and mount it, before attempting to reboot the sys-
tem:
fsck -F vxfs -o full /dev/vx/rdsk/4.1ROOT/rootvol
mkdir /tmp_mnt
mount -F vxfs /dev/vx/dsk/4.1ROOT/rootvol /tmp_mnt
SEE ALSO fsck(1M), mkdir(1M), mount(1M), vxintro(1M), vxprint(1M), vxvol(1M)VxVM 5.0.31.1 24 Mar 2008 vx_emerg_start(1M)