Sponsored Content
Top Forums UNIX for Dummies Questions & Answers Getting 'out of range' when partitioning Post 302091177 by pmichner on Friday 29th of September 2006 02:55:00 PM
Old 09-29-2006
Getting 'out of range' when partitioning

Hello,
Using Solaris 10. Going to mirror disks with solstice disksuite. Documentation says I have to make both disks partitioned exactly the same before moving on.
Here's the layout of c1t0d0
Part Tag Flag Cylinders Size Blocks
0 root wm 1237 - 2473 6.00GB (1237/0/0) 12587712
1 swap wu 0 - 1236 6.00GB (1237/0/0) 12587712
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 var wm 2474 - 3710 6.00GB (1237/0/0) 12587712
6 unassigned wm 3711 - 14075 50.29GB (10365/0/0) 105474240
7 unassigned wm 14076 - 14086 54.66MB (11/0/0) 111936

I need to make c1t1d0 look just like it to do a mirror. I get to the last partition so my c1t1d0 looks like:
Part Tag Flag Cylinders Size Blocks
0 root wm 1237 - 2473 6.00GB (1237/0/0) 12587712
1 swap wu 0 - 1236 6.00GB (1237/0/0) 12587712
2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 var wm 2474 - 3710 6.00GB (1237/0/0) 12587712
6 unassigned wm 3711 - 14075 50.29GB (10365/0/0) 105474240
7 unassigned wm 0 0 (0/0/0) 0

I go to 7 on c1t1d0 to make the last change and get the following:
partition> 7
Part Tag Flag Cylinders Size Blocks
7 unassigned wm 0 0 (0/0/0) 0

Enter partition id tag[unassigned]: unassigned
Enter partition permission flags[wm]: wm
Enter new starting cyl[0]: 14076
Enter partition size[0b, 0c, 14076e, 0.00mb, 0.00gb]: 54.66mb
`54.66mb' is out of range
Enter partition size[0b, 0c, 14076e, 0.00mb, 0.00gb]:

I can't imagine the two disks being different in size. Anyone ever seen 'out of range' before while partitioning?

Thanks in advance
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Partitioning

I'm looking for a Partitioning Tool preferably with a GUI preferably free that is easy to use if anyone has any suggestions they will be greatfully recieved, Thanks. (4 Replies)
Discussion started by: OSNovice
4 Replies

2. UNIX for Dummies Questions & Answers

Partitioning HD

I would like to install Redhat 7.2 on my Windows machine. I only have one hard drive and I dont want to lose Windows. Which method is best for partitioning the HD? I tried it once with Partition Magic and I was installing Corel Linux First Edition and Corel wiped out my entire HD (not good when... (2 Replies)
Discussion started by: primal
2 Replies

3. UNIX for Dummies Questions & Answers

Partitioning

Hiya folks, Before I install Linux, I want to partition my HD, basically I want to split my 80GB HD in half so I can run Linux but still keep Windows XP. I tried doing through the windows workstation and browsing the XP help files but it either didnt work or I was doing something wrong. I dont... (7 Replies)
Discussion started by: Mr_Pinky
7 Replies

4. Red Hat

Partitioning?

Hey, this question is generated purely out of my lack of knowledge. Ok, obviously you can partition hard drives, I have Windows 2k, and can partition it from administrative tools, however, all of the help sections have utterly failed to give me any information other than "when you partition, it... (5 Replies)
Discussion started by: Mal_Zapatos
5 Replies

5. Shell Programming and Scripting

print range between two patterns if it contains a pattern within the range

I want to print between the range two patterns if a particular pattern is present in between the two patterns. I am new to Unix. Any help would be greatly appreciated. e.g. Pattern1 Bombay Calcutta Delhi Pattern2 Pattern1 Patna Madras Gwalior Delhi Pattern2 Pattern1... (2 Replies)
Discussion started by: joyan321
2 Replies

6. Ubuntu

About partitioning

Hi folks, Ubuntu 10.04-1 64-bit HD - 1T SATA3 I ran graphic installation installing Ubuntu-10.04-1 desktop from Live CD The partition on the new HD is as follow; /root /home /kvm (kvm is for keeping the guests of KVM, the virtualizer) Installion went through without problem abd... (0 Replies)
Discussion started by: satimis
0 Replies

7. Solaris

Partitioning Question

I was told that on the bootable drive, slice 02 is reserved for system usage. Is this true? In our deployment each server is equipped with a hardware RAID adapter. The current plan is to create the slices as follows: c1t0d0s0 = swap 16386 c1t0d0s1 = /var 15366 c1t0d0s2 = / free Does this... (4 Replies)
Discussion started by: msarro
4 Replies

8. Red Hat

Partitioning a new Hardrive

What is the command to partition a completely new hard drive using red hat linux (1 Reply)
Discussion started by: blend
1 Replies

9. Shell Programming and Scripting

Partitioning in AIX

I am working in AIX ver 5 rel 3. It shows as follows. @:on(cluster302)/home/abcde00-> shiusr1c is LPAR (Logical PARtition). Then what is "shiissra" called? Thanks Krishna Please use code tags next time for your code and data. (1 Reply)
Discussion started by: kmanivan82
1 Replies

10. Red Hat

Need help Partitioning

I am getting ready to install RHEL6 server. I have to create these partitions: / 10GB SWAP 3GB /opt/kent 10GB /opt/kent/logs /backup 20 GB Will Gparted do this? or whats the easiest way? or even a tutorial?I am so new to this (4 Replies)
Discussion started by: linux4noob
4 Replies
vxbrk_rootmir(1M)														 vxbrk_rootmir(1M)

NAME
vxbrk_rootmir - break off a mirror of a VxVM root disk to create a separate root disk generation SYNOPSIS
/etc/vx/bin/vxbrk_rootmir [-g diskgroup] [-v] [-b] [-t tasktag] {daname|dmname} DESCRIPTION
The vxbrk_rootmir command creates a mirror of a Veritas Volume Manager (VxVM) rootable boot disk, breaks the mirror, and then makes the broken-off mirror into a completely separate root disk that is suitable for booting by itself. Except the specified target disk, the bootdg should not contain any disks other than valid root mirror disks. A valid root mirror disk should have mirrors of all volumes in the bootdg. Thus, all disks must be exactly identical in terms of the volumes contained. The given disk access name, daname, or disk media name, dmname, is first checked to see if it is already a valid root disk mirror. If so, the mirror is broken off from the current VxVM root disk, and regenerated into a unique VxVM root disk. If the specified disk is not a valid root disk mirror, and is unused for other purposes, the vxrootmir command is first called to mirror the specified disk from the cur- rent VxVM root disk. After the mirroring operation is complete, the mirror is then broken off, and regenerated into a unique VxVM root disk. OPTIONS
-b Uses the setboot command to set the alternate boot disk to the specified disk. If the -v option is also specified, information is displayed about the current setboot settings. -g diskgroup Specifies the disk group into which the newly broken-off mirror is to be placed. The disk group is created if it does not already exist. If the disk group already exists, the broken-off mirror is added to it. If this option is not specified, the disk group of the broken-off mirror is set to the current default disk group. However, the generation number is made different from the default disk group to prevent the mirror from being automatically imported. -t tasktag Marks any tasks that are registered to track the progress of an operation with the specified tag, tasktag. This option is passed to vxrootmir if it is necessary first to mirror the specified disk that is to be broken off. -v Displays verbose output, including timestamps for operations that are in progress. This option is passed to vxrootmir if it is neces- sary first to mirror the specified disk that is to be broken off. ARGUMENTS
daname Specifies the disk to be used as the broken off mirror by its disk access name (such as c0t2d0). dmname Specifies the disk to be used as the broken off mirror by its disk media name (such as rootdisk03). EXAMPLES
This example shows the vxbrk_rootmir command being executed on a disk that already contains a valid root mirror: /etc/vx/bin/vxbrk_rootmir -g brkdg -vb c4t15d0 VxVM vxbrk_rootmir INFO V-5-2-4023 17:47: Checking specified disk(s) for presence and type VxVM vxbrk_rootmir INFO V-5-2-4025 17:47: DA c4t15d0s2, DM rootdisk06 is a valid root mirror VxVM vxbrk_rootmir INFO V-5-2-4052 17:47: Saving configuration data for later restoration VxVM vxbrk_rootmir INFO V-5-2-4022 17:47: Breaking off root mirror on DA c4t15d0s2 VxVM vxbrk_rootmir INFO V-5-2-4054 17:47: Setting broken off mirror on c4t15d0s2 as unique root disk VxVM vxbrk_rootmir INFO V-5-2-2566 17:47: Preparing disk c4t15d0s2 as a VxVM root disk VxVM vxbrk_rootmir INFO V-5-2-4046 17:47: Patching devnodes, fstab and volboot file in new Root FS VxVM vxbrk_rootmir INFO V-5-2-4045 17:47: Patching /stand/bootconf file to contain new root disk VxVM vxbrk_rootmir INFO V-5-2-2462 17:48: Current setboot values: VxVM vxbrk_rootmir INFO V-5-2-4048 17:48: Primary: 0/0/2/0.2.0 VxVM vxbrk_rootmir INFO V-5-2-4010 17:48: Alternate: 0/2/1/0.8.0.255.2.5.0 VxVM vxbrk_rootmir INFO V-5-2-4042 17:48: Making c4t15d0s2 (0/2/1/0.8.0.255.1.15.0) the alternate boot disk VxVM vxbrk_rootmir INFO V-5-2-4028 17:48: Disk c4t15d0s2 is now a broken off root disk The next example shows the command being executed on a disk that does not contain a valid root mirror, and which requires vxrootmir be called to mirror the root disk first: /etc/vx/bin/vxbrk_rootmir -g brkdg -vb c5t5d0 VxVM vxbrk_rootmir INFO V-5-2-4023 16:25: Checking specified disk(s) for presence and type VxVM vxbrk_rootmir INFO V-5-2-4043 16:25: Mirroring root disk VxVM vxrootmir INFO V-5-2-2501 16:25: Gathering information on the current VxVM root configuration VxVM vxrootmir INFO V-5-2-2441 16:25: Checking specified disk(s) for usability VxVM vxrootmir INFO V-5-2-2566 16:25: Preparing disk c5t5d0 as a VxVM root disk VxVM vxrootmir INFO V-5-2-3766 16:25: Disk c5t5d0 is now EFI partitioned disk c5t5d0s2 VxVM vxrootmir INFO V-5-2-2410 16:25: Adding disk c5t5d0s2 to brkdg as DM rootdisk03 VxVM vxrootmir INFO V-5-2-1646 16:25: Mirroring all volumes on root disk VxVM vxrootmir INFO V-5-2-1648 16:25: Mirroring volume standvol VxVM vxrootmir INFO V-5-2-1648 16:26: Mirroring volume swapvol VxVM vxrootmir INFO V-5-2-1648 16:30: Mirroring volume rootvol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume homevol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume tmpvol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume usrvol VxVM vxrootmir INFO V-5-2-1648 16:34: Mirroring volume optvol VxVM vxrootmir INFO V-5-2-1648 16:36: Mirroring volume varvol VxVM vxrootmir INFO V-5-2-1616 16:40: Disk c5t5d0s2 is now a mirrored root disk VxVM vxbrk_rootmir INFO V-5-2-4052 16:40: Saving configuration data for later restoration VxVM vxbrk_rootmir INFO V-5-2-4022 16:40: Breaking off root mirror on DA c5t5d0s2 VxVM vxbrk_rootmir INFO V-5-2-4054 16:40: Setting broken off mirror on c5t5d0s2 as unique root disk VxVM vxbrk_rootmir INFO V-5-2-2566 16:40: Preparing disk c5t5d0s2 as a VxVM root disk VxVM vxbrk_rootmir INFO V-5-2-4046 16:41: Patching devnodes, fstab and volboot file in new Root FS VxVM vxbrk_rootmir INFO V-5-2-4045 16:41: Patching /stand/bootconf file to contain new root disk VxVM vxbrk_rootmir INFO V-5-2-2462 16:41: Current setboot values: VxVM vxbrk_rootmir INFO V-5-2-4048 16:41: Primary: 0/0/2/0.2.0 VxVM vxbrk_rootmir INFO V-5-2-4010 16:41: Alternate: 0/2/1/0.8.0.255.2.0.0 VxVM vxbrk_rootmir INFO V-5-2-4042 16:41: Making c5t5d0s2 (0/2/1/0.8.0.255.2.5.0) the alternate boot disk VxVM vxbrk_rootmir INFO V-5-2-4028 16:41: Disk c5t5d0s2 is now a broken off root disk SEE ALSO
vxbootsetup(1M), vxdg(1M), vxintro(1M), vxrootmir(1M), vxtask(1M) VxVM 5.0.31.1 24 Mar 2008 vxbrk_rootmir(1M)
All times are GMT -4. The time now is 11:02 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy