Sponsored Content
Operating Systems Solaris [HELP] mirroring disk at solaris 8 sparc v890 Post 302090889 by bucci on Wednesday 27th of September 2006 11:31:51 PM
Old 09-28-2006
hi expert,

thank you for your solution, btw how to move /export/home to c1t0 ?

fyi, this server is the new server and dont have any data

thank you

Best Regards,

wu

Quote:
Originally Posted by RTM
In your current configuration, you can't mirror all four drives. You could mirror /data2 and /data3 to c1t3 and c1t5 (this is assuming that you aren't using them at this time for anything).

If you wanted to mirror all drives, then you would have to free up one drive to allow 3 empty/unused drives. Since you haven't put the partition tables, it is hard to tell what space is being used by swap.

A possible solution is to move /export/home to c1t0 but even this would cause issues since you have both the OS partitions and /data on the same drive. Performance may be effected in attempting to have so much on c1t0.
There is also an issue with /data2 and /data3 - if they are using all the space on the drive, then you would have nothing left for a metadb (which doesn't require much space, maybe 1 cylinder but it would still cause a possible issue if you have to reformat /data2 and /data3)

Currently:
c1t0d0 - / /var /data /opt 116477898
c1t1d0 - /export/home 49580320
c1t2d0 - /data2 141065220
c1t3d0
c1t4d0 - /data3 141065220
c1t5d0


Possible solution ( Don't assume this will work - it doesn't take into account your swap partition and metadb slices or the effect of /data on c1t0)
c1t0d0 - / /var /data /opt /export/home 128885302
c1t1d0 - mirror c1t0
c1t2d0 - /data2 141065220
c1t3d0 - mirror c1t2
c1t4d0 - /data3 141065220
c1t5d0 - mirror c1t4

All in all, you really need to rethink what this needs and how to set it up. Having /data on the same drive as /, /var, /opt will possibly cause issues with the drive and how many writes will be going to that one drive (and then if it's mirrored, to the mirrored drive). Post the partition table of c1t0.
 

10 More Discussions You Might Find Interesting

1. Solaris

Solaris mirroring / non-root disk

Hi Guys, Need to add 2 disks into a JBOD array (3310). Does anyone see anything wrong with my Procedure / Doco below? 1> Logon to system, check system logs for abnormal entries. 2> Make backups of related system files: A>cp -p /etc/system /etc/system.backup.081505 B>cp -p /etc/vfstab... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies

2. UNIX for Advanced & Expert Users

Solaris 8 disk/mirroring issue

Hello! I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Discussion started by: ghuber
5 Replies

3. Solaris

[help]network error after reboot server v890 sparc

hi expert, i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below : Setting default IPv4 interface for multicast: add net 224.0/4: gateway... (5 Replies)
Discussion started by: bucci
5 Replies

4. Solaris

[need help] error after configure network card at v890 sparc

hi experts, i have some problem with my server v890, i had config the network with ce0,ce1 and eri0 but after reboot the server have this error messages display : WARNING: ce0: fault detected external to device; service degraded WARNING: ce0: xcvr addr:0x01 - link down configuring IPv4... (2 Replies)
Discussion started by: bucci
2 Replies

5. Solaris

Disk Mirroring for Solaris 10 x86

I am having an issue with setting up disk mirroring for Solaris 10 on an x86 server. My main problem is that the volumes and slices have already been setup and our proprietary software has already been installed and configured. The entire drive has been allocated in this configuration and the... (2 Replies)
Discussion started by: chuck43
2 Replies

6. Solaris

Solaris 10 Disk Mirroring

Has anyone managed to set up disk mirroring in Solaris 10 yet? If so can you point me in the direction of some useful documentation please. Cheers (25 Replies)
Discussion started by: korfnz
25 Replies

7. Solaris

Disk Mirroring on solaris 5.8

Hi Friends, I am having Sun Solaris 5.8 OS installed having 2 different size hard disk, sizes are c0t0d0s0(160 GB) and c0t2d0s0 (40GB). I have installed Sun Solaris 5.8 OS in c0t0d0s0 (160GB) harddisk. I have configured all the parameters required for disk mirroring. But when executing... (4 Replies)
Discussion started by: Vijayakumarpc
4 Replies

8. Solaris

Moving disk partition from Solaris sparc to x86

Hello Gurus, Im trying to migrate some SAN disks from sparc server to X86 one, and having issues with disks not getting mounted on the X86 server with " not this fstyp error" due to the different partitions lay out between the two OS. I have tried it from sparc to sparc server and it worked,... (10 Replies)
Discussion started by: aladdin
10 Replies

9. Solaris

root disk mirroring in solaris volume manager for solaris 10

Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment. Let me know if you need any deatils on this. Thanks, Rama (1 Reply)
Discussion started by: ramareddi16
1 Replies

10. Solaris

Root disk mirroring in Solaris 10

I would like to perform root disk mirroring task. Can someone please help me out on this. Thanks !! Regards, Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
HD(4)							     Linux Programmer's Manual							     HD(4)

NAME
hd - MFM/IDE hard disk devices DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave hdd. General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi- cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions on an IDE disk. For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the second one. They are typically created by: mknod -m 660 /dev/hda b 3 0 mknod -m 660 /dev/hda1 b 3 1 mknod -m 660 /dev/hda2 b 3 2 ... mknod -m 660 /dev/hda8 b 3 8 mknod -m 660 /dev/hdb b 3 64 mknod -m 660 /dev/hdb1 b 3 65 mknod -m 660 /dev/hdb2 b 3 66 ... mknod -m 660 /dev/hdb8 b 3 72 chown root:disk /dev/hd* FILES
/dev/hd* SEE ALSO
chown(1), mknod(1), sd(4), mount(8) COLOPHON
This page is part of release 3.44 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 1992-12-17 HD(4)
All times are GMT -4. The time now is 07:03 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy