For yourself?
Get a list of all the boxes in a file, either IPs or hostnames.
The expect script would look something like:
The above example assumes that the passwd command is going to first ask you for your passwd, then you'll have to enter the new passwd twice.
Before you run it against all boxes, test it with one box. Make sure you log into the box first on another terminal, just in case.
If no issues, remove the hostname from your sever list, then do
Quick note, if your prompt is $ or ends in $, you need to comment it out in the expect script., so expect sees it as a regular character. Otherwise it'll go very slow.
Could someone please help me...I have an expect script. There's a need for a log in during the script and a password is required...right now the password is just a variable in the expect script...what would be the best way to put that in an encrypted flat file and have the expect script pull the... (2 Replies)
Hello folks
I have a conf file ,say 'pass.conf' ,which is storing ascii password : PASS1111.
I need to encrypt this password once and store it in a file.
I ,then need to write a script which would read this encrypted password and decrypts it.The o/p o this script shud be this decrypted... (8 Replies)
Day before yesterday,I got the success creating a shell script using expect tool and now it is running successfully on the server.
Now I want to make some changes in paswwordchanger.sh as you can see it can handle only one user i.e dbaguest and not other user.So I am thinking the logic how I can... (0 Replies)
All,
I am trying to use expect to send SFTP password because I am unable to share a key with the vendor.
They gave me a password that uses some symbols in it like $ and !
When i try to use the send command in expect it thinks the $ is a variable.
Is there anyway to have it send the... (2 Replies)
How can I pass password in SSH command without using expect in a shell program.
I don't have expect installed on my Solaris server.
#!/bin/bash
ssh user@hotname (how to supply pass in script?:wall:)
Experts please help its very urgent.
Shrawan Kumar Sahu (4 Replies)
Friends,
Need someone's help in helping me with the below requirement for a script:
> For a list of servers(over 100+), I need to login into each of them(cannot configure password-less ssh) & grab few configuration details <
I know, this is possible through expect programming in a simple... (2 Replies)
Friends,
Need someone's help in helping me with the below requirement for a script:
> For a list of servers(over 100+), I need to login into each of them(cannot configure password-less ssh) & grab few configuration details <
I know, this is possible through expect programming in a simple... (14 Replies)
Dear All,
I have a requirement where I have to SFTP or SCP a file in a batch script. Unfortunately, the destination server setup is such that it doesn't allow for shell command line login. So, I am not able to set up SSH keys. My source server is having issues with Expect. So, unable to use... (5 Replies)
I have a script that does an SSH into a remote node. It should expect the prompt and send the password.
#!/usr/bin/expect
set user ;
set pass ;
spawn ssh $user@E-Internal
expect {
-re "RSA key fingerprint" {send "yes\r"}
timeout... (1 Reply)
Newbie here. My goal is to have the expect script log into the Ubuntu 18.04 server and run two commands (lsb_release -a and ip addr) and eventually pipe the output/results to a file. For now, I would be happy to get this one command or two to run successfully. How to fix this?
#!/usr/bin/expect ... (3 Replies)
Discussion started by: jacob600
3 Replies
LEARN ABOUT REDHAT
runtest
runtest(1) General Commands Manual runtest(1)NAME
runtest - the DejaGnu test driver program
SYNOPSIS
runtest [ options ]
DESCRIPTION
DejaGnu is a framework for running test suites on GNU tools. It is written in expect, which uses TCL (Tool command language). runtest is
the test driver program; use it to control what tests to run, and variations on how to run them.
You can find a comprehensive description of DejaGnu and runtest in The DejaGnu Testing Framework or its Info version, dejagnu.info.
OPTIONS --all Print all test output to screen. By default, only unexpected results are displayed.
--baud rate
Set the baud rate for a serial line connection. Some serial interface programs (like tip) don't use this value but instead use a
separate initialization file.
--connect type
The type of connection to use. The choices are rlogin, telnet, rsh, kermit, tip and mondfe.
--debug
Turn on expect internal debugging output. All output is logged to a file called dbg.out. The output of the --strace also goes into
this file.
--help Prints out a help screen and then exits.
--host type
The configuration string for the host.
--ignore test1.exp test2.exp ...
Do not run the specified tests. Electronic mail addresses to receive test results.
--name hostname
The network hostname of the target board.
--objdir path
path is a directory containing compiled test code.
--outdir directory
The name of a directory for test log output.
--reboot
Reboot the target board when runtest initializes (if supported).
--srcdir path
path is a directory containing test directories.
--strace N
Turns on expect internal tracing to N levels deep.
--target type
The configuration string for the target.
--tool toolname
Specify the tool to be tested. toolname controls the test suite applied, and the associated initialization module.
--verbose, -v
Turns on more debugging output from test cases and DejaGnu utility code. Use more than once to increase output further.
--version, -V
Prints out the versions of DejaGnu, expect and Tcl.
-D[number]
Activate the Tcl debugger.number can be either 1 or 0. If it is 1, then the expect shell will break when it starts to run. All ^C's
drop DejaGnu back to the debugger prompt. A 0 starts DejaGnu like normal, but a ^C drops to the debugger prompt.
Any file name on the command line is assumed to be a subset
of the test names to run. Usually these are the names of the expect test driver, ie... special.exp.
Makefile style variables are used to specify tool names and their flags; these and other configuration dependent values are saved in the
file site.exp, created during configuration.
EXIT CODES
runtest sets the exit code to 1 if any of the tests failed, or sets it to 0 if all the tests passed.
SEE ALSO
The DejaGnu Testing Framework (dejagnu.info). This is the DejaGnu manual; its source is the SGML files doc/*.sgml. in the DejaGnu distri-
bution.
AUTHOR
Rob Savoye (rob@welcomehome.org)
08 Dec 1998 runtest(1)