parameter passing Post: 302080657

10 More Discussions You Might Find Interesting

1. Programming

Passing parameter to makefile?

Hi, How to pass parameter to makefile? Please let me know if any one knows and also please put an example of makefile with this feature. thanks, Manju.

2. Shell Programming and Scripting

wrong parameter passing!

Hi all I have a script which will take input as filename and passes it to a java program. It is as follows -------------------------------- FILENAME=$1 echo $FILENAME ${JAVA_HOME}/bin/java -cp DateProvider $FILENAME ------------------------------------------------- when I execute the same...

3. Shell Programming and Scripting

Passing asterisk As A Parameter

I have written a Shell Script Program which accepts 3 parameters as shown below: ./calc 20 + 2 in the above line ./calc is the Shell Script itself with 3 parameters, namely: 20 + and 2. Well, now let's look inside the Script: result=$1$2$3 echo $result The output will be as...

4. Shell Programming and Scripting

Parameter Passing problem

Hi All, I developed a KSH script which will accept two parameters as input. These two parameters are some directories paths. In the script i am validating the number of paramaters it received as below #-------------------------------------- # Check Command line arguments...

5. Shell Programming and Scripting

Passing parameter in quotes

Hi, PW='/as sysdba'; export PW in other module I call sqlplus ${PW} (this line I unable to change!) How I can define PW so that sqlplus calls PW in quotes i.e sqlplus '/as sysdba' I tried like this PW="'/as sysdba'"; export PW - no luck Thanks in advance

6. Shell Programming and Scripting

Positional parameter passing

Hi All, When passing parameters to a sheel script, the parameters are referenced by their positions such as $1 for first parameter, $2 for second parameter. these positional values can only have values ranging from $0-$9 (0,1,2,3...9). I have a shell script meant to accept 20 parameters. for...

7. Shell Programming and Scripting

Passing a parameter to AWK

Hi All, I am trying to pass a parameter to AWK on my KSH shell prompt as below. var1=2 echo $var1 awk -v var2=${var1} '{print var2}' testfile.txt I am passing the input file (testfile) to awk to get some o/p. It is having 10 records. When I run AWK, it is throwing the following errors...

8. Shell Programming and Scripting

Passing parameter to script, and split the parameter

i am passing input parameter 'one_two' to the script , the script output should display the result as below one_1two one_2two one_3two if then echo " Usage : <$0> <DATABASE> " exit 0 else for DB in 1 2 3 do DBname=`$DATABASE | awk -F "_" '{print $1_${DB}_$2}` done fi

9. Shell Programming and Scripting

Passing parameter more than 9

Hi, I've written a script where eleven parameter to be passed from command line which is inserting into an oracle table, it is working but the tenth and 11th parameter are not accepting as given it is referring to 1st parameter. HERE IS THE SCRIPT #!/bin/ksh #set -o echo $*...

10. Shell Programming and Scripting

Passing parameter through file

Hi , I am passing date parameter through file my shell script testing.sh is #set -x #set -v asd=$1 asd1=$2 echo $asd echo $asd1 Passing parameter as below sh testing.sh `cat file1.txt` Output

LEARN ABOUT SUSE

irsend

IRSEND(1)								FSF								 IRSEND(1)

NAME

       irsend - basic LIRC program to send infra-red commands

SYNOPSIS

       irsend [options] DIRECTIVE REMOTE CODE [CODE...]

DESCRIPTION

       Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
       as TV boxes, HiFi sets, etc.

       DIRECTIVE can be:
	  SEND_ONCE	    - send CODE [CODE ...] once
	  SEND_START	    - start repeating CODE
	  SEND_STOP	    - stop repeating CODE
	  LIST		    - list configured remote items
	  SET_TRANSMITTERS  - set transmitters NUM [NUM ...]
	  SIMULATE	    - simulate IR event

       REMOTE is the name of a remote, as described in the lircd configuration file.

       CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.

       NUM is the transmitter number of the hardware device.

       For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:

	  LIST	 ""    ""   - list all configured remote names
	  LIST REMOTE  ""   - list all codes of REMOTE
	  LIST REMOTE CODE  - list only CODE of REMOTE

       The SIMULATE command only works if it has been explicitly enabled in lircd.

       -h --help
	      display usage summary

       -v --version
	      display version

       -d --device
	      use given lircd socket [/var/run/lirc/lircd]

       -a --address=host[:port]
	      connect to lircd at this address

       -# --count=n
	      send command n times

EXAMPLES

	  irsend LIST DenonTuner ""
	  irsend SEND_ONCE  DenonTuner PROG-SCAN
	  irsend SEND_ONCE  OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
	  irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
	  irsend SEND_STOP  OnkyoAmpli VOL-DOWN
	  irsend SET_TRANSMITTERS 1
	  irsend SET_TRANSMITTERS 1 3 4
	  irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"

FILES

       /etc/lirc/lircd.conf
	      Default lircd configuration file.  It should contain all the remotes, their infra-red codes and the corresponding timing	and  wave-
	      form details.

DIAGNOSTICS

       If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
       "irsend: could not connect to socket"
       "irsend: Connection refused" (or "Permission denied").

SEE ALSO

       The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.

       lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.

irsend 0.8.7pre1						     May 2010								 IRSEND(1)