BRP-PACU(1)						      General Commands Manual						       BRP-PACU(1)

NAME

       brp-pacu - dual fft live audio analysis program

SYNOPSIS

       brp-pacu

DESCRIPTION

       This  manual  page  documents  briefly the brp-pacu program.  This manual page was written for the Debian distribution because the original
       program does not have a manual page.

       brp-pacu is an audio analysis tool to configure any sound system with an equalizer.  It compares the output of the system to the  input	of
       the system and allows you to use this data to perform final equalization by matching the results with actual DSP/EQ.

       Channel	1  is the output of the system we are observing (measured), channel 2 is the input (reference).  You also need a decent calibrated
       omnidrectional microphone (reasonably flat 20Hz-20kHz) and either a USB-Preamp like the 2-channel M-Audio, or a mixer with a 30dB pad or so
       going  into the laptop mic input.  No Pad is necessary if you are lucky enough to have a laptop or PC with a line input.  The headphone out
       will have the pink noise.

       brp-pacu works through Jack Audio Connection Kit.

OPTIONS

       This program takes no arguments

SEE ALSO

       jackd(1).

AUTHOR

       This manual page was written by Jaromir Mike <mira.mikes@seznam.cz>, for the Debian project (but may be used by others).

								 February 28, 2011						       BRP-PACU(1)