06-20-2006
Mount Second Disk
Anyone,
I am trying to mount a second hard drive on a sunfire V120 w/solaris 5.8. I took this hard drive from another system because I deleted some files off that system and I want to mount it to another system so I can copy the file back onto the system. I really have no other means of getting the file of the known good system (CD/floppy). I inserted the drive into a second bay (supposedly disk1 slot).
Let it be known that I am far from a gurru at Unix. What I've learned is stricly self taught from bits and bits of reading.
I inserted the disk and booted the system. I then tried to to copy the file
cp -r [directory] /dev/disk1/home (I made that command up I'm sure) needless to say it didn't work.
what I want to do is beable to mount this second disk and be able to access it from the first disk kinda like you would a cdrom [cd /cdrom/cdrom0].
or I will be checking this thread periodically.
Thanks in Advance
Last edited by dummy101; 06-23-2006 at 04:31 AM..
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have two Unix machines on the network and now one of them are running out of disk but i have alot on the other so i like to mount the disk (or a folder) from the one that has disk and mount it on the other that does not.
How do i do that? Is it possible i read the "man mount" but didn't really... (5 Replies)
Discussion started by: sajjan2
5 Replies
2. UNIX for Dummies Questions & Answers
Hi, guys !
Could someone clarify one thing for me:
I start machine from disk0, and want to check the /etc/vfstab on disk1. How do i do it ?
Tried to write:
cd /
mount /dev/dsk/c0t1d0s0 /mnt
But if I do cd /mnt, it is empty. I expected to see disk1 there ? Or am I wrong ?
How do I... (3 Replies)
Discussion started by: DGoubine
3 Replies
3. UNIX for Dummies Questions & Answers
I have a USB disk on a little NAS controller (NSLU2 running unslung 6.8) that I can access nicely with root with
mount -t cifs \\\\10.134.23.23\\DISK\ 2 /mnt/LKGD7F73A
However, when I run emacs from an user mode xterm prompt, emacs cannot read and write the files on /mnt/LKGD7F73A. Emacs can... (11 Replies)
Discussion started by: siegfried
11 Replies
4. Linux
Hi guys! I've just mounted my drive in fstab:
/dev/sdb /myfolder ext3 defaults 0 0
and rebooted linux.
I've got severel failers during booting process and also I can't login as root first time:
login: root
password:root
incorrect login
login:user
password: user
... (1 Reply)
Discussion started by: Junior Admin
1 Replies
5. OS X (Apple)
When a new disk is connected to a Mac/OSX, it automatically mounts on /Volumes.
Is it possible to manually mount it elsewhere?
For example, on "/raid"?
- m66 - (5 Replies)
Discussion started by: makrell66
5 Replies
6. Shell Programming and Scripting
Hey there, sorry if this is a bit too much of a noob question, trying to get to grips with a simple bash script - but i have done ZERO bash scripting.
basically having worked out how to mount and unmount disks using:
disktool -m *device* & disktool -e *device*
- and looking at the result of... (2 Replies)
Discussion started by: hollister
2 Replies
7. Ubuntu
I am running Ubuntu Server, I recently added a new hard drive to the machine
When I run fdisk -l I see both drives.
The recently added drive is present but it's listed as extended.
when I try to mount the drive it says you must specify the file system type.
I can't mount this drive, I was... (2 Replies)
Discussion started by: NelsonC
2 Replies
8. AIX
Hi all,
i must add a new disk on a LPAR.
I've done all the HMC and VIOS Procedure to create a virtual host with disk and assign it to lpar.
I don't remember how i must do on the lpar to see this disk. (i use lvm not veritas).
Thanks in advance and sorry for my english.
Bye
Mario (2 Replies)
Discussion started by: Zio Bill
2 Replies
9. Solaris
So. My system have 2 solaris10 machine but system disk of machine 1 data crash.I bring the system disk of machine 1 install on machine2 for get data from disk machine1 but I can't mount disk. because msg is
bash-3.00# mount /dev/dsk/c1t3d0s0 /mnt
mount: /dev/dsk/c1t3d0s0 is not this fstype... (3 Replies)
Discussion started by: infjustice
3 Replies
10. Solaris
Hi folks,
because of disk space problem my root is almost full..The root is mounted on rpool and i want to move /app on a new disk, is that possible without compromising any link?How can i do that?
I use solaris 10
Thank you in advance,
Matt
---------- Post updated at 04:36 PM... (8 Replies)
Discussion started by: mattpunk
8 Replies
LEARN ABOUT REDHAT
mount_pcfs
mount_pcfs(1M) System Administration Commands mount_pcfs(1M)
NAME
mount_pcfs - mount pcfs file systems
SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point
mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point
DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If
mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted.
If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments,
including the FSType-specific_options; see mount(1M) for more details.
The special argument can be one of two special device file types:
o A floppy disk, such as /dev/diskette0 or /dev/diskette1.
o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file
for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are
/dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1.
The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table.
OPTIONS
generic_options
See mount(1M) for the list of supported options.
-o
Specify pcfs file system specific options. The following options are supported:
foldcase|nofoldcase
Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre-
vious behavior of pcfs. The default is nofoldcase.
FILES
/etc/mnttab table of mounted file systems
/etc/vfstab list of default parameters for each file system
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWesu |
+-----------------------------+-----------------------------+
SEE ALSO
mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS)
NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym-
bolic link refers, rather than on top of the symbolic link itself.
SunOS 5.10 24 Nov 2003 mount_pcfs(1M)