ls(1)							      General Commands Manual							     ls(1)

NAME

       ls, lc, l, ll, lsf, lsr, lsx - list contents of directories

SYNOPSIS

       [names]

       [names]

       [ls_options] [names]
       [ls_options] [names]
       [ls_options] [names]
       [ls_options] [names]
       [ls_options] [names]

DESCRIPTION

       For  each  directory  argument,	the  command  lists the contents of the directory.  For each file argument, repeats its name and any other
       information requested.  The output is sorted in ascending collation order by default (see Environment Variables below).	When  no  argument
       is  given, the current directory is listed.  When several arguments are given, the arguments are first sorted appropriately, but file argu-
       ments appear before directories and their contents.

       If you are a user with appropriate privileges, all files except and are listed by default.

       There are three major listing formats.  The format chosen depends on whether the output is going to a login device (determined  by  whether
       output device file is a device), and can also be controlled by option flags.

       The  default format for a login device is to list the contents of directories in multicolumn format, with entries sorted vertically by col-
       umn.  (When individual file names (as opposed to directory names) appear in the argument list, those file names are  always  sorted  across
       the  page  rather  than	down  the page in columns because individual file names can be arbitrarily long.)  If the standard output is not a
       login device, the default format is to list one entry per line.

       The and options enable multicolumn formats, and the option enables stream output format in which files are listed across  the  page,  sepa-
       rated  by commas.  In order to determine output formats for the and options, uses an environment variable, to determine the number of char-
       acter positions available on each output line.  If this variable is not set, the database is used to determine the number of columns, based
       on the environment variable If this information cannot be obtained, 80 columns is assumed.

       The command functions the same as except that the default output is columnar, even if output is redirected.

   Options
       recognizes the following options:

	      List all entries; usually entries whose names begin with a period
		     are not listed.

	      List nonprinting characters in the octal
		     notation.

	      Use time of last modification of the inode
		     (file created, mode changed, etc.) for sorting or printing (ell)).

	      If an argument is a directory, list only its name (not its contents);
		     often used with (ell) to get the status of a directory.

		     Under the UNIX 2003 environment (see standards(5)), with does not follow symbolic links unless the or option is specified.

	      List the extent attributes of the file.
		     If  any  of  the  files has a extent attribute, this option lists the extent size, space reserved and allocation flags.  This
		     option must be used with the (ell) option.

	      Interpret each argument as a directory
		     and list the name found in each slot.  This option disables (ell), and and enables the order is the order	in  which  entries
		     appear in the directory.

	      Same as
		     (ell), except that only the group is printed (owner is omitted).  If both (ell) and are specified, the owner is not printed.

	      For each file, list the inode number
		     in the first column of the report.  When used in multicolumn output, the number precedes the file name in each column.

	      (ell) List in long format, giving mode, number of links,
		     owner,  group, size in bytes, and time of last modification for each file (see further and below).  If the time of last modi-
		     fication is greater than six months ago, or any time in the future, the year is substituted for the hour and  minute  of  the
		     modification  time.   If the file is a special file, the size field contains the major and minor device numbers rather than a
		     size.  If the file is a symbolic link, the filename is printed, followed by and the pathname of the referenced file.

		     Under the UNIX 2003 environment (see standards(5)), with does not follow symbolic links unless the or option is specified.

	      Stream output format.

	      The same as
		     (ell) except that the owner's UID and group's GID numbers are printed, rather than the associated character strings.

	      The same as
		     (ell) except that only the owner is printed (group is omitted).  (If both (ell) and are specified, the group is not printed).

	      Put a slash
		     after each file name if that file is a directory.

	      List nonprinting characters in file names as the character

	      Reverse the order of sort to get reverse (descending) collation
		     or oldest first, as appropriate.

	      List size in blocks of 512-byte units, including indirect blocks,
		     for each entry.  The first entry listed is the total number of blocks in the directory.  When used in multicolumn output, the
		     number of blocks precedes the file name in each column.  The number of indirect blocks in a file is filesystem dependent.

	      Sort by time modified (latest first) before sorting alphabetically.

	      Use time of last access instead of last modification for sorting
		     option) or printing (ell) option).

	      List multicolumn output with entries sorted across rather than down the page.

	      The same as
		     except  that  the	current  directory and parent directory are not listed.  For a user with appropriate privileges, this flag
		     defaults to on, and is turned off by

	      List multicolumn output with entries sorted down the columns.

	      After each file name, put one of:

		     o	A slash if the file is a directory or a symbolic link to a directory.
		     o	An asterisk if the file is executable;
		     o	An at-sign if the file is a symbolic link to a file;
		     o	A vertical bar if the file is a fifo.

		     Under the UNIX 2003 environment (see standards(5)), with does not follow symbolic links unless the or option is specified.

	      If a symbolic link referencing a file of type directory is specified
		     on the command line, evaluates the file information and file type to be those of the file referenced by the link, and not the
		     link itself. However, writes the name of the link itself and not the file referenced by the link.

	      Evaluate the file information and file type for all symbolic links
		     (whether  named  on  the command line or encountered in a file hierarchy) to be those of the file referenced by the link, and
		     not the link itself.  However, writes the name of the link itself and not the file referenced by the link.  When is used with
		     write the contents of symbolic links in the long format.

	      Recursively list subdirectories encountered.

	      (one) List the file names in single column format
		     regardless of the output device.  This forces single column format to the user's terminal.

       Specifying  more  than  one  of the options in the following mutually exclusive pairs is not considered an error: and (ell), and (ell), and
       (ell), and (one), and and and

       is known by several shorthand-version names for the various formats:

	      is equivalent to
	      is equivalent to
		     (ell)
	      is equivalent to
	      is equivalent to
	      is equivalent to

       The shorthand notations are implemented as links to Option arguments to the shorthand versions behave exactly as if the long form above had
       been used with the additional arguments.  The mode printed in listings produced by the (ell) option consists of 10 characters, for example,

       The first character indicates the entry type:

	      Block special file
	      Character special file
	      Directory
	      Symbolic link
	      Network special file
	      Fifo (also called a "named pipe") special file
	      Socket
	      Ordinary file

       The next 9 characters are interpreted as three sets of three characters each which identify access and execution permissions for the owner,
       group, and others categories, as described in chmod(1).	The indicates the permission is not granted.  The various permissions can  be  put
       together in any combination, except that the and characters are mutually exclusive, as implied below.

	      Read by owner
	      Write by owner
	      Execute (or search directory) by owner; do not set user ID on execution
	      Execute/search by owner; set user ID on execution
	      No execute/search by owner; set user ID on execution
	      Read by group
	      Write by group
	      Execute/search by group; do not set group ID on execution
	      Execute/search by group; set group ID on execution
	      No execute/search by group; set group ID on execution
	      Read by others
	      Write by others
	      Execute/search by others; do not set sticky bit on execution
	      Execute/search by others; set sticky bit on execution
	      No execute/search by others; set sticky bit on execution

       The mode characters are interpreted as follows:

	      Deny all permissions in the corresponding position.

	      Grant read permission to the corresponding user class.

	      Grant write permission to the corresponding user class.

	      Grant execute (or search in directory) permission
		     to the corresponding user class.

	      Grant execute (search) permission to the corresponding user class.
		     Execute the file as if by the owner (set user ID, SUID) or group (set group ID, SGID), as indicated by position.

	      Deny execute (search) permission to the corresponding user class.
		     Execute the file as if by the owner (set user ID, SUID) or group (set group ID, SGID), as indicated by position.

	      Grant execute (search) permission to others.
		     The "sticky" bit is set (see the description of in chmod(2)).

	      Deny execute (search directory) permission to others.
		     The "sticky" bit is set.

       When  an  option  is specified that results in a listing of directory and/or file sizes in bytes or blocks (such as the or (ell) option), a
       total count of blocks, including indirect blocks, is also printed at the beginning of the listing.

   Access Control Lists (ACLs)
       If a file has optional ACL entries, the (ell) option displays a plus sign after the file's permissions.	The permissions shown are  a  sum-
       mary  representation  of the file's access control list, as returned by in the field (see stat(2)).  To list the contents of an access con-
       trol list, use the command (see lsacl(1) and acl(5)) for HFS file systems, or the command (see getacl(1) and aclv(5)) for JFS file systems.

EXTERNAL INFLUENCES

       For information about the UNIX standard environment, see standards(5).

   Environment Variables
       If the variable is set, uses the width provided in determining positioning of columnar output.

       determines the locale to use for the locale categories when both and the corresponding environment variable (beginning with do not  specify
       a locale.  If is not set or is null, it defaults to (see lang(5)).

       determines the order in which the output is sorted.

       determines  which  characters are classified as nonprinting for the and options, and the interpretation of single- and/or multibyte charac-
       ters within file names.

       determines the date and time strings output by the (ell), and options.

       determines the language in which messages (other than the date and time strings) are displayed.

       If any internationalization variable contains an invalid setting, they all default to (see environ(5)).

   International Code Set Support
       Single- and multibyte character code sets are supported.

RETURN VALUE

       exits with one of the following values:

	      All input files were listed successfully.

	      was aborted because errors occurred when accessing files.
		     The following conditions cause an error:

		     o	Specified file not found.
		     o	User has no permission to read the directory.
		     o	Process could not get enough memory.
		     o	Invalid option specified.

EXAMPLES

       Print a long listing of all the files in the current working directory (including  the  file  sizes).   List  the  most	recently  modified
       (youngest) file first, followed by the next older file, and so forth, to the oldest.  Files whose names begin with a are also printed.

WARNINGS

       Setting	options  based	on whether the output is a login (tty) device is undesirable because is very different from On the other hand, not
       using this setting makes old shell scripts that used almost inevitably fail.

       Nonprinting characters in file names (without the or option) may cause columnar output to be misaligned.

DEPENDENCIES

   NFS
       The (ell) option does not display a plus sign after the access permission bits of networked files to represent existence of optional access
       control list entries.

AUTHOR

       was developed by AT&T, the University of California, Berkeley and HP.

FILES

       For group IDs for	     (ell) and
       For user IDs for 	     (ell) and
       For terminal information.

SEE ALSO

       chmod(1), find(1), getacl(1), lsacl(1), stat(2), acl(5), aclv(5), standards(5).

STANDARDS CONFORMANCE

																	     ls(1)