05-26-2006
tip into 280R
I need to use tip from machine A serial port to machine B serial port. Can someone point me to an example of the correct cable to use?
Thanks.
10 More Discussions You Might Find Interesting
1. Solaris
hi,
i hv received SUNfire 280R system ........for its initial configuration i want to connect to it through hyperterminal from the windows system..........i hv got one serial port to RJ-45 port converter with the system............can anybody tell me the normal console cable which is used to... (3 Replies)
Discussion started by: girish_shukla
3 Replies
2. Solaris
Hi!,
We have a SUN Server 280R (2 *36GB) disks. The disk with the root filesystem needs to be replaced! Lots of H/W error messages!
We have the new disk - but how do we go about re-building it!
Is there any document or location where I can get detailed re-build instructions?
Any help... (7 Replies)
Discussion started by: sdharmap
7 Replies
3. Solaris
The box is in Houston, and I am in Dallas. Anyway, I do have serial access to the console. The box is hanging just after the WARNING's for the SDS modules not loading (normal boot message). I booted off CD, and mounted up all the file systems. Everything looked normal, and I could not find any... (3 Replies)
Discussion started by: 98_1LE
3 Replies
4. Solaris
I'm stuck here trying to connect to a 280R via serial port A to a laptop. I set hyperterminal up for 9600, 8, N, 1, but when I hit enter, nothing comes up in hyperterminal. There is no keyboard or mouse attached to the 280R, and it doesnt have a video card, so thats not an option.
I'm stumped.... (4 Replies)
Discussion started by: dangral
4 Replies
5. Solaris
Hi friends....I'm from indonesia, sorry if my english is not that good. Can somebody help me what kind of message is this ?
Jan 16 18:22:42 ASM imapd: get_balanced_partition: -- chosen
Jan 16 18:22:50 ASM SUNW,UltraSPARC-III+: NOTICE: Corrected system bus (CE) Event detected by CPU1 at TL=0,... (0 Replies)
Discussion started by: komang
0 Replies
6. Solaris
Hi there
Does anybody know what the biggest capacity disk I can get into a Sunfire 280R
I currently have two 73gb disks , but I need to get these up to the biggest available
Any help would be greatly appreciated (4 Replies)
Discussion started by: hcclnoodles
4 Replies
7. UNIX for Dummies Questions & Answers
Hello all,
I'm lost and can't figure this problem out.
I have a Sun fire 280R running Solaris 8. Everything was working great. I have one drive in bay 1(not 0). But when I reboot the system it trys to open files in /dev/rdsk/c1t1d0s0. Should it have been opeing /dev/rdsk/c1t0d0s0, the... (4 Replies)
Discussion started by: larryase
4 Replies
8. Solaris
is there a command i can run at the ksh that will give me the serial number on solaris?
solaris 8, and 9
280r servers (16 Replies)
Discussion started by: BG_JrAdmin
16 Replies
9. Solaris
Hi,
I have to question:
1) when O/S is booting, i see messages:
/dev/rdsk/c1t0d0s5: is logging
/dev/rdsk/c1t0d0s3: is logging
/dev/rdsk/c1t0d0s7: is logging
i partitioned these slices during installation of O/S 5.9. I can access to these mountpoint no problem. But... (3 Replies)
Discussion started by: lamoul
3 Replies
10. Hardware
I have a problem with one of my Sun 280R servers.
I'm unable to boot it. I've managed to get to the {ok} prompt from the RSC card.
Please see output below
ok show-devs
/virtual-memory
/memory
/aliases
/options
/openprom
/chosen
/packages
/openprom/client-services... (2 Replies)
Discussion started by: soliberus
2 Replies
LEARN ABOUT DEBIAN
ttysrv
TTYSRV(8) System Manager's Manual TTYSRV(8)
NAME
ttysrv - connect to a serial port and log output
SYNOPSIS
ttysrv [-o option] [-s sock] [-l log] -t tty [-b baud] [-p parity] [-w wordsize] [-i pidfile]
DESCRIPTION
ttysrv is the backend for rconsole. It connects to the serial port, handles the log file and waits for connections from rconsole to view
what's happening on the serial console.
OPTIONS
-t tty Specify which device to connect to.
-s sock
The name of the socket to listen for connections from rconsole on.
-o option
Specify any ttyios options to open the port with. Currently only nolocal is supported.
-l log The logfile to write to. If not set then no log is kept.
-b baud
Set the baud rate to talk to the port at. Defaults to 9600.
-p parity
Set the parity for the serial port. Defaults to none.
-w wordsize
Set the word size for the serial port. Defaults to 8 bits.
-i pidfile
The file to write the pid of ttysrv to. If not specified no such file is written.
SEE ALSO
rconsole(1), remote-tty(1).
AUTHOR
rtty was written by Paul Vixie <vixie@isc.org>. This manual page was written by Jonathan McDowell <noodles@earth.li> for the Debian project
(but may be used by others).
May 23, 2006 TTYSRV(8)