What application is using the port Post: 302074229

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

which port to write my server application?

I want to write a server application that would accept HTTP requests from client. The server would be on a machine that has no connection to the INTERNET. The clients that would be posting their HTTP requests would be doing so through webbrowser .Thus it would be sort of intranet application....

2. IP Networking

How can I check what port addresses used the application

Hello Mentors! I am a new here in the furom, i hope somebody can understand my problem. Basically we have an application here called unigraphics and being installed per station and the setup is look like this. 1. installed unigraphics UGNX3 version on every station 2. some are installed in...

3. Programming

how to write application for 32 com port

Dear Sir, i m going to use NP5610-16 moxa device for multiport serial communication. i m using fedora-core 6 o.s. after installation it will detect serial ports as /dev/ttyr0,/dev/ttyr1...ttyr32. there are total 32 com ports. now i want to write application which monitor all serial ports and...

4. Linux

MQ application port 1414

Hi All, I have two MQ (port) 1414 established (going out) $ netstat -an | grep 1414 tcp 0 0 0.0.0.0:1414 0.0.0.0:* LISTEN tcp 0 0 20.76.1.1:32855 142.8.1.3:1414 ESTABLISHED tcp 0 0...

5. Shell Programming and Scripting

command to know the application running of the port

Hi, is there any command to findout that which application is using the particular port. or whether any port is occupied with the specfic process id ?

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. HP-UX

how to check remote server port listening from application.

Hi, I have an application running on HP-UX, from this application I need to findout if the port number. lets say 7890,7891, 7892 are listening on the remote server running on HP-UX. Is there any way of doing it using "system()" function or any other? I noticed that nmap, netcat are not...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

LEARN ABOUT CENTOS

xvgrabport

XvGrabPort(3)							  libXv Functions						     XvGrabPort(3)

NAME

       XvGrabPort - lock port for exclusive use by client

SYNOPSIS

       #include <X11/extensions/Xvlib.h>

       int XvGrabPort(Display *dpy, XvPortID port, Time time);

ARGUMENTS

       dpy     Specifies the connection to the X server.

       port    Defines the port to be grabbed.

       time    Specifies the request timestamp.

DESCRIPTION

       XvGrabPort(3) grabs a port.  Once a client grabs a port, only that client can make video requests to that port.

       If  the	time  is  before  the  current port time, the XvGrabPort request is ignored and XvInvalidTime is returned.  If the port is already
       grabbed by another client, XvAlreadyGrabbed is returned. Otherwise it returns a status of Success.  The port time is updated when the  fol-
       lowing requests are processed: XvGrabPort(3), XvUngrabPort(3), XvPutVideo(3), XvPutStill(3), XvGetVideo(3), XvGetStill(3).

       If  the port is actively processing video for another client, the video is preempted, and an XvVideoNotify event with detail XvPreempted is
       generated for its drawable.

RETURN VALUES

       [Success]
	       Returned if XvGrabPort(3) completed successfully.

       [XvInvalidTime]
	       Returned if requested time is older than the current port time.

       [XvAlreadyGrabbed]
	       Returned if the port is already grabbed by another client.

       [XvBadExtension]
	       Returned if the Xv extension is unavailable.

       [XvBadAlloc]
	       Returned if XvGrabPort(3) failed to allocate memory to process the request.

DIAGNOSTICS

       [XvBadPort]    Generated if the requested port does not exist.

SEE ALSO

       XvUngrabPort(3), XvVideoNotify(3)

X Version 11							    libXv 1.0.9 						     XvGrabPort(3)