What application is using the port Post: 302074229

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

which port to write my server application?

I want to write a server application that would accept HTTP requests from client. The server would be on a machine that has no connection to the INTERNET. The clients that would be posting their HTTP requests would be doing so through webbrowser .Thus it would be sort of intranet application....

2. IP Networking

How can I check what port addresses used the application

Hello Mentors! I am a new here in the furom, i hope somebody can understand my problem. Basically we have an application here called unigraphics and being installed per station and the setup is look like this. 1. installed unigraphics UGNX3 version on every station 2. some are installed in...

3. Programming

how to write application for 32 com port

Dear Sir, i m going to use NP5610-16 moxa device for multiport serial communication. i m using fedora-core 6 o.s. after installation it will detect serial ports as /dev/ttyr0,/dev/ttyr1...ttyr32. there are total 32 com ports. now i want to write application which monitor all serial ports and...

4. Linux

MQ application port 1414

Hi All, I have two MQ (port) 1414 established (going out) $ netstat -an | grep 1414 tcp 0 0 0.0.0.0:1414 0.0.0.0:* LISTEN tcp 0 0 20.76.1.1:32855 142.8.1.3:1414 ESTABLISHED tcp 0 0...

5. Shell Programming and Scripting

command to know the application running of the port

Hi, is there any command to findout that which application is using the particular port. or whether any port is occupied with the specfic process id ?

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. HP-UX

how to check remote server port listening from application.

Hi, I have an application running on HP-UX, from this application I need to findout if the port number. lets say 7890,7891, 7892 are listening on the remote server running on HP-UX. Is there any way of doing it using "system()" function or any other? I noticed that nmap, netcat are not...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

LEARN ABOUT DEBIAN

netstat-nat

netstat-nat(1)						      General Commands Manual						    netstat-nat(1)

NAME

       netstat-nat - Show the natted connections on a linux iptable firewall

SYNOPSIS

       netstat-nat [options]

DESCRIPTION

       netstat-nat Displays NAT connections managed by netfilter/iptables which comes with the > 2.4.x linux kernels.

       The  program  reads  its information from '/proc/net/ip_conntrack' or '/proc/net/nf_conntrack', which is the temporary conntrack-storage of
       netfilter.

OPTIONS

       -h     displays help

       -n     don't resolve IPs/portnumbers to host/portnames

       -p <protocol>
	      display NAT connections with protocol selection (see /etc/protocols)

       -s <source host>
	      display connections by source IP/hostname

       -d <destination host>
	      display connections by destination IP/hostname

       -S     display SNAT connections

       -D     display DNAT connections

       -L     display only connections to NAT box self (doesn't show SNAT & DNAT)

       -R     display only connections routed through the NAT box (doesn't show SNAT & DNAT)

       -x     extended view of hostnames

       -r <src|dst|src-port|dst-port|state>
	      sort connections

       -o     no output header

       -N     display NAT box connection information (only valid with SNAT & DNAT)

       -v     prints version

FILES

       /proc/net/ip_conntrack or /proc/net/nf_conntrack

SEE ALSO

       http://www.tweegy.nl/projects/netstat-nat/
       http://www.netfilter.org/

AUTHOR

       netstat-nat has been written by D.Wijsman danny@tweegy.nl
       The manual page has been written by marceln@xs4all.nl

								     July 2002							    netstat-nat(1)