What application is using the port Post: 302074227

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

which port to write my server application?

I want to write a server application that would accept HTTP requests from client. The server would be on a machine that has no connection to the INTERNET. The clients that would be posting their HTTP requests would be doing so through webbrowser .Thus it would be sort of intranet application....

2. IP Networking

How can I check what port addresses used the application

Hello Mentors! I am a new here in the furom, i hope somebody can understand my problem. Basically we have an application here called unigraphics and being installed per station and the setup is look like this. 1. installed unigraphics UGNX3 version on every station 2. some are installed in...

3. Programming

how to write application for 32 com port

Dear Sir, i m going to use NP5610-16 moxa device for multiport serial communication. i m using fedora-core 6 o.s. after installation it will detect serial ports as /dev/ttyr0,/dev/ttyr1...ttyr32. there are total 32 com ports. now i want to write application which monitor all serial ports and...

4. Linux

MQ application port 1414

Hi All, I have two MQ (port) 1414 established (going out) $ netstat -an | grep 1414 tcp 0 0 0.0.0.0:1414 0.0.0.0:* LISTEN tcp 0 0 20.76.1.1:32855 142.8.1.3:1414 ESTABLISHED tcp 0 0...

5. Shell Programming and Scripting

command to know the application running of the port

Hi, is there any command to findout that which application is using the particular port. or whether any port is occupied with the specfic process id ?

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. HP-UX

how to check remote server port listening from application.

Hi, I have an application running on HP-UX, from this application I need to findout if the port number. lets say 7890,7891, 7892 are listening on the remote server running on HP-UX. Is there any way of doing it using "system()" function or any other? I noticed that nmap, netcat are not...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

LEARN ABOUT MOJAVE

pldd

PLDD(1) 							 Linux User Manual							   PLDD(1)

NAME

       pldd - display dynamic shared objects linked into a process

SYNOPSIS

       pldd pid
       pldd option

DESCRIPTION

       The  pldd  command  displays a list of the dynamic shared objects that are linked into the process with the specified process ID.  The list
       includes the libraries that have been dynamically loaded using dlopen(3).

OPTIONS

       -?, --help
	      Display program help message.

       --usage
	      Display a short usage message.

       -V, --version
	      Display the program version.

EXIT STATUS

       On success, pldd exits with the status 0.  If the specified process does not exist, the user does not have permission to access its dynamic
       shared  object  list, or no command-line arguments are supplied, pldd exists with a status of 1.  If given an invalid option, it exits with
       the status 64.

VERSIONS

       pldd is available since glibc 2.15.

CONFORMING TO

       The pldd command is not specified by POSIX.1.  Some other systems have a similar command.

NOTES

       The command

	   lsof -p PID

       also shows output that includes the dynamic shared objects that are linked into a process.

       The gdb(1) info shared command also shows the shared libraries being used by a process, so that one can obtain similar output to pldd using
       a command such as the following (to monitor the process with the specified pid):

	   $ gdb -ex "set confirm off" -ex "set height 0" -ex "info shared" 
		   -ex "quit" -p $pid | grep '^0x.*0x'

BUGS

       Since glibc 2.19, pldd is broken: it just hangs when executed.  It is unclear if it will ever be fixed.

EXAMPLE

       $ echo $$	       # Display PID of shell
       1143
       $ pldd $$	       # Display DSOs linked into the shell
       1143:	 /usr/bin/bash
       linux-vdso.so.1
       /lib64/libtinfo.so.5
       /lib64/libdl.so.2
       /lib64/libc.so.6
       /lib64/ld-linux-x86-64.so.2
       /lib64/libnss_files.so.2

SEE ALSO

       ldd(1), lsof(1), dlopen(3), ld.so(8)

COLOPHON

       This  page is part of release 4.15 of the Linux man-pages project.  A description of the project, information about reporting bugs, and the
       latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.

GNU
								    2017-09-15								   PLDD(1)