03-22-2006
db.192.168.1
that is the zone file.
Last edited by xnightcrawl; 05-01-2006 at 06:32 PM..
10 More Discussions You Might Find Interesting
1. Solaris
I don't have DNS, and would like to resolve EVERYTHING through local /etc/hosts file.
My first sunbox has the following configuration:
# hostname
mybox.home.com
My host file is as follows:
# cat /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
192.25.x.x ... (6 Replies)
Discussion started by: mr_manny
6 Replies
2. IP Networking
hi,
what would cause the nslookup to work one way but not the other?
for most machine it works both ways.
>nslookup 172.18.10.235
Server: 172.16.17.3
Address: 172.16.17.3#53
235.10.18.172.in-addr.arpa name = machine1.prod.local
>nslookup machine1
Server: ... (3 Replies)
Discussion started by: purest
3 Replies
3. Shell Programming and Scripting
Hi All,
If I give the hostname followed by nslookup, I get the output like below,
commandprompt>nslookup efgh
Using /etc/hosts on: xyz
looking up FILES
Trying DNS
Non-authoritative answer:
Name: abcd
Address: 47.47.47.47
Aliases: efgh
I am not sure on the bolded ones. Can... (4 Replies)
Discussion started by: Rajakct84
4 Replies
4. Solaris
Hi ,
I have a requirement to find the aliases by doing an nslookup on the Cname.
If i do an nslookup on the alias name i get the Cname , but i need the cname from alias name.
eg: Hostname = acb.example.com
Virtual name= abcvirtual.example.com
nslookup abcvirtual.example.com will... (3 Replies)
Discussion started by: mpics66
3 Replies
5. Shell Programming and Scripting
Hi guys,
I'm back to get some help again :)
I have a file that has a list of IP addresses, and I use nslookup in my script to resolve hostnames of those IPs.
the problem I'm facing is that I not all the hostnames got resolved! and I don't know why. sometimes the same duplicate IP returns a... (8 Replies)
Discussion started by: Abdulelah
8 Replies
6. Emergency UNIX and Linux Support
Hi all
Nslookup command returns!!!!
Code:
nslookup 10.91.44.29
Server: 127.0.0.1
Address: 127.0.0.1#53
29.44.91.in-addr.arpa name = station1.example.com
Code:
nslookup station1.example.com
Server: 127.0.0.1
Address: 127.0.0.1#53
Name: ... (4 Replies)
Discussion started by: anishkumarv
4 Replies
7. HP-UX
I am having a problem with a new server build that has got me completely baffled. This server has a private back end network so the way it is supposed to work is that the server thinks its ip address is 10.131.0.48 but the rest of the world knows it as 199.68.100.100 per DNS. It has to be this way... (2 Replies)
Discussion started by: keelba
2 Replies
8. Solaris
hi,
I am new in Solaris 10 , i am installing a software in solaris 10, while performing pre requisite nslookup command should return without error, and the IP address and host should match those listed in the etc/hosts file,
but nslookup command show the below error , can anybody tell me how i... (4 Replies)
Discussion started by: zeeshan047
4 Replies
9. Shell Programming and Scripting
Hey folks. Long time lurker, first time poster. I'm a bit of a newbie at "coding" (obviously, scripting is a teensy bit different than coding) and I've run into a problem that I just can't seem to get around.
I'm going through a list of servers to check their name, IP, reverse-NSLOOKUP name and... (2 Replies)
Discussion started by: Bearwhale
2 Replies
10. Shell Programming and Scripting
Hi,
I have a rather simple awk statement to perform an nslookup on a file (list of IPs). If the lookup yields a result, then it sends it to a file. If no result, there is no output. I've been trying to use !NR or !NF with an if statement to make the output state "NA" if there is no result,... (5 Replies)
Discussion started by: umang2382
5 Replies
LEARN ABOUT FREEBSD
nsd-xfer
nsd-xfer(8) nsd 3.2.12 nsd-xfer(8)
NAME
nsd-xfer - AXFR client to transfer zones from a name server
SYNOPSIS
nsd-xfer [-4] [-6] [-a address[@port]] [-p port] [-s serial] [-T tsiginfo] [-v] -z zone -f file servers
DESCRIPTION
Nsd-xfer is program to transfer zones from a name server using AXFR. NSD is a complete implementation of an authoritative DNS nameserver.
OPTIONS
-4 Only send to IPv4 addresses.
-6 Only send to IPv6 addresses.
-a address[@port]
Specify the source address (and port) to send from.
-f file
The file to store the zone in.
-p port
Specify the port to send to.
-s serial
Specify the serial of the current zone. The zone is only transferred if the master server has a zone with a greater serial number.
-T tsiginfo
Use TSIG to verify the zone transfer. The tsiginfo file must contain the TSIG key information. The file is removed upon successful
reading of the key. The format of the tsiginfo file is described in the doc/README file (section 3.3).
-v Be more verbose.
-z zone
Specify the zone to receive.
servers
List of nameservers to try.
EXAMPLES
To run this program the standard way type:
# nsd-xfer -z foobar.cz -f foobar.cz.zone 1.2.3.4
SEE ALSO
nsd(8), nsdc(8), nsd.conf(5), nsd-checkconf(8), nsd-notify(8), nsd-patch(8), zonec(8)
AUTHORS
NSD was written by NLnet Labs and RIPE NCC joint team. Please see CREDITS file in the distribution for further details.
NLnet Labs jul 19, 2012 nsd-xfer(8)