10-04-2002
Thanks. We had HP support on the line ( they didn't like our idea of using dd ) and when we went to do what they wanted ( boot single user - vgcfgrestore , vgchange...) they didn't hear us when we mentioned the backups were on done with Legato networker to a SUN server w/jukebox. They had us in single user with no connection to the other server. When we told them this (before anything was actually done) their response was "Oops".
Then they come back with a way of moving the data without being in single user but using pvmove (as Perderabo suggested ). Worked great for /usr but /opt and /var didn't work. Both died with i/o errors (must be where the bad blocks on the disk were at).
So we go to restore /var and /opt....networker can't find the tape volumes! Makes it look like the system had not had a full backup for over a year! (still looking into that one!)
So, we ended up creating two new logical volumes, mounting them as /newvar and /newopt and doing cpio from the old to the new....so far it's only had a few problems with certain files (we are hoping they aren't needed or if they are to copy from a dev box with the same OS/version).
Sure wish we had a real HP-UX god(dess) here - ours was let go in the last RIF (although she didn't mind as she just had twins).
Last edited by RTM; 10-04-2002 at 07:18 PM..
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
$ errpt | more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
3074FEB7 0802050205 T H fscsi1 ADAPTER ERROR
B8113DD1 0802050205 T H fcs1 LINK ERROR
B8113DD1 0802050205 T H fcs1 LINK ERROR
3074FEB7 0802050205 T H fscsi0 ADAPTER ERROR
B8113DD1 ... (0 Replies)
Discussion started by: mcastill66
0 Replies
2. UNIX for Dummies Questions & Answers
I have a SunOS 5.8 server. I suspect there may be errors with one of the physical disks (based on someone reporting hearing a "clicking sound" during the night shift, however I do not hear anything this morning).
Which log would show this?
Thank you. (2 Replies)
Discussion started by: FredSmith
2 Replies
3. AIX
Hi,
I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions?
Regards
Gareth (4 Replies)
Discussion started by: m223464
4 Replies
4. UNIX for Dummies Questions & Answers
Hi all, dummy here.... I have major errors on entering the shell. On login I get:
-bash: dircolors: command not found
-bash: tr: command not found
-bash: fgrep: command not found
-bash: grep: command not found
-bash: grep: command not found
-bash: id: command not found
-bash: [: =: unary... (12 Replies)
Discussion started by: wcmmlynn
12 Replies
5. Filesystems, Disks and Memory
so we have a solrais 9 system attached to an HP SAN.
we are using sssu to do snap clones every hour.
the only problem is the we get write errors on the solrais system every time we do a snap.
from /var/adm/messages
Apr 21 14:37:48 svr001 scsi: WARNING:... (0 Replies)
Discussion started by: robsonde
0 Replies
6. Shell Programming and Scripting
I am looking for some tips or suggestions in how to do the following.
1) From a Solaris server, I run the command iostat -En and receive output that is similiar to the following which shows your disks along with the cdrom/dvdrom:
c0t2d0 Soft Errors: 0 Hard Errors: 0 Transport... (1 Reply)
Discussion started by: sunsysadm2003
1 Replies
7. Solaris
Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies
8. AIX
Hi,
The system is a Power6 8204 with an external storage 7031. OS is AIX 5.3. I replaced a failed disk hdisk28 and put it back to the volume group. Everything looks just fine. After the replacement, errpt has kept sending "Perm DISK OPERATION ERROR".
Other than the error, everything still... (1 Reply)
Discussion started by: aixlover
1 Replies
9. Ubuntu
Hi,
During start up I got the message "Your disk drives are being checked for errors". But it went so fast that I could read following messages.
Once logged I though I could find it in "dmesg" but nothing...
May someone know where I can find plese ? :) (3 Replies)
Discussion started by: xib.be
3 Replies
10. Solaris
Hi,
What are the initial checks needs to be done while observing hard errors on one of the hard disk drive.
Thanks,
Babu. (1 Reply)
Discussion started by: lbreddy
1 Replies
LEARN ABOUT SUNOS
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)