my partner change the server's ip address and now i can't to mount the oracle's filesystem, what i do? i don't want to reinstall Unix. My unix is SCO UNIX 5.0.5 (9 Replies)
Dear All
We have HP9000 rp7400 Server running with hp-ux 11i.
Our Disk storage has two volume groups and are allocated as follows:
1. /#vgdisplay -v
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available... (1 Reply)
Hi to all
i want to increase the /usr size.
but, it is mirrored on hdisk0 and hdisk1.
i know that chfs will work, but i am not confident about mirroring.
can anyone tell me the procedure.
thanks (2 Replies)
hi guys
suse 10.2
today some guys are adding some luns from a SAN so in order to add them I followed this command
echo 1 > /sys/class/fc_host/host1/issue_lip
echo "- - -" > /sys/class/scsi_host/host<number>/scan
nice now
after that I tried to create a folder in /
but it won't let... (2 Replies)
i need to write a shell script for printing the list of filesystems whose disk utilization is more than 75%...i tried using df -h along with awk but cud'nt make the combination work.....:wall:
when we do df -h then the filesystems which are using more than 75% capacity shud be printed according to... (11 Replies)
I need a scrip that will show me the filesystems that are greater than 70%...but not sure how to filter using the df -h | grep
Thank you for your help!! (6 Replies)
SunOS 5.10 Generic_142900-15 sun4u sparc SUNW,SPARC-Enterprise
How can I tell if "clustering" is being used in my shop?
I have to file systems that are identical. These filesystems are nfs mounted. But how can I tell if they are being kept in sync as a result of clustering or some other... (2 Replies)
Discussion started by: Harleyrci
2 Replies
LEARN ABOUT DEBIAN
vm
VM(1) mgetty VM(1)NAME
vm - VoiceModem is the program for handling the voice modem functionality from shell scripts
ACTIONS
beep options [<frequency [<length in 0.001sec>]]>
diagnostics options device name (e.g. ttyS2
dial options phone number
help
play options [<file names]+>
record options file name
shell options [<shell script [shell options]]>
wait options [<time in seconds]>
devicetest
OPTIONS -c n use compression type n
-d n set i/o device
-t, -m, -i, -e, -s, -H equals to -d <2,3,4,5,6,7>
-l s set device string (e.g. -l ttyS2:ttyC0)
-v verbose output
-w use off / on hook signal from local handset to start and stop recording
-x n set debug level
-L n set maximum recording length in sec
-P print first DTMF tone on stdout and exit
-R read and print DTMF string on stdout and exit
-S s set default shell for shell scripts (e.g. -S /bin/sh)
-T n set silence timeout in 0.1sec
-V n set silence threshold to <n> (0-100%%)
SEE ALSO vgetty(1)POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 30:
You forgot a '=back' before '=head1'
Around line 32:
'=item' outside of any '=over'
Around line 71:
You forgot a '=back' before '=head1'
perl v5.10.1 2010-04-04 VM(1)