I got a corrupt /etc/inittab file....what next? Post: 29090

Sponsored Content

Top Forums UNIX for Dummies Questions & Answers I got a corrupt /etc/inittab file....what next? Post 29090 by Ivo on Monday 30th of September 2002 06:47:46 AM

09-30-2002

Registered User

Hello again and thanks for the reply!

We have solved the problem I mentioned above, and indeed as you wrote we called the local Sun office who sent their guru to help us out. They also charged us an enormous amount but that's the way it works nowadays. The fix itself was rather basic but as in most cases you have to know it first.

Next to the Netra you need an installation server in the network and you also need to know the MAC-address of the network card in the Netra. This can be found in the documentation which comes with the machine.

The software for the installation-server can be downloaded from the Sun site or you can use CD-ROM's which, in our case, the Sun technician brought along.

Solaris had to be reinstalled on the Netra and to do this there is a wizard on the installation server which guides you through the whole procedure. Like I just mentioned, you need to provide the MAC-address of the Netra when it asks for it. The server boots the Netra and the installation can proceed much in the same manner as a normal installation.

As for why the inittab file was corrupt remains a mystery for us. We assume that someone had tried to install Solaris before but did not complete the installation.

Ivo

Ivo

View Public Profile for Ivo

Find all posts by Ivo

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

inittab solaris

Hi! Is it possible to add more ttys in Solaris, like with inittab in Linux? I want to switch between the ttys with Alt F1+F2+F3 .... like Linux does. How can i do this?

2. HP-UX

Corrupt Member File

I have been fine adding/removing printers up until this week. Now when I go to add a new remote printer I get "corrupted member file". I go to /etc/lp/member and the byte count on the new printer name is 0. I VI the file and put /dev/null in to make it the correct size and it all looks fine and...

3. UNIX for Dummies Questions & Answers

find a corrupt tar file

Hey there I am just looking for a way to find a corrupt tar file. I want to write a script to help sift through the 1000's of tar files we go through daily and move any corrupt ones to a different directory structure. Is there an easy way to do this.

4. AIX

GPFS file system corrupt issue

Hi Administrators, I have one issue related to GPFS filesystem. We have bad entries in this file system, which reflects error like ls: 0653-341 The file <filename> does not exist. when we give "ls -ltr" on this directory. So we taken the FS filesystem offline and followed the below steps. ...

5. UNIX for Dummies Questions & Answers

Zipped tar file is corrupt

Hello, I am currently dumping 30-40 reports on a Unix folder located here /home/apps/reports/prode/excel I use K-shell to do this task. In that, I use the gzip command to compress these files. I want to be able to use a tar command to first load the entire directory into one file then gzip that...

6. Solaris

Recovering from corrupt /etc/system file

Hi I would like to know one thing while recovering from corrupt /etc/system file. For that we have to do at ok> boot -a when system ask for system file we give /dev/null. Could any one tell me what /dev/null value will do in this case. Regards

7. UNIX for Advanced & Expert Users

Linux on vmware won't boot due to corrupt library file!

We have an issue here: The libc.so.6 file (link) is corrupted and it causes the system unbootable. It even doesn't boot to single user mode. How can we boot the system to fix the library file? Or is there any other solutions for this issue? Here are some boot messages:...

8. UNIX for Dummies Questions & Answers

What breaks inittab

Today there was a situation where processes running from inittab was broken. Can someone help me understand, how to find out, who might have stopped those processes? Or how does it get broken? G

9. Solaris

UNIX : how can I recover a corrupt tar file from a tape?

I've a tape contains a corrupt tar file. I'm using Unix SunOS 5.5.1. So when I run this command : dd if=/dev/rmt/0 of=/tmp/outputfile.tar I get this error message : warning /pci@1f, 0/pci@1/pci@1/sunw, isptwo@4/st@4,0 (sty): Error for command : read Error Level: Fatal Requested...

LEARN ABOUT SUNOS

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)