Hello all,
I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I answer the question about install typeit only lets me do a fresh install).....then i hit enter and this is what i get:
Code:
NOTICE: ram : no space on device on device 31/50
some pathname/trminit(or something like that)terminated at signal (8)
**Safe to power off**
press any key to reboot
If it would get passed this point the next step would allow me to use UNIX fdisk and divvy, but i can't get that far.
Any advice would be greatly appreciated.
kris.......
Last edited by Yogesh Sawant; 04-10-2011 at 10:38 AM..
Reason: added code tags
I have just been made responsible for setting up Apache on our office SCO
box. I have searched the internet, but
haven't found any details that I can make
sense of. I'm unfamiliar with Unix and would appreciate any help members of
the forum have to offer. (1 Reply)
My company has a Compaq NeoServer running SCO OpenServer Release 5 (vintage late 1998) that we inherited from another small company. This has been a very reliable file server for our small company. We recently installed a new Linux server and would like to convert the NeoServer to other functions... (1 Reply)
Hi everyone,
We r installing sco openserver 5.07 on dell poweredge 2800 but we are facing problem when installing SCSI-raid drivers. Dell provide Perc4 raid card and we dont found raid drivers for this specific raid card. So we r stuck up on primary stage and we also dont know the... (2 Replies)
we are installing Openserver 5.0.7, system have SAS controller (Hard Disk Attached) as well as Adaptec ultra 320 controller (Tape Drive Attached).
At the time of installation we link both driver BTLD
Boot: Defbootstr link=accraid ad320
Aftes succesfully installation of accraid btld... (6 Replies)
Even though IBM states that the x3500 server is Openserver 6.x compatible, it is still a bit of a trick to install SCO Openserver 6 to the machine because the standard method of installing the BTLD required to install the OS requires that the driver be written to a floppy which doesn't exist on... (3 Replies)
I am currently having a problem with my SCO OpenServer 5.0.5 / 3.2v5.0.5 system.
Running smoothly for the past 3 years, at random on March 16, 2010 the system crashes. I reboot it. Everything is normal again. 9 hours later it crashes again. This cycle has repeated itself ever since then. System... (2 Replies)
Hi
I am trying to install NIC FastNic 10/100 PCI Ethernet driver into PCI# 3 of the GA-SIML Rev 1.0 Motherboard on 1GB Hard-disk driveI have following the instruction on the CD-Disk and when I added NIC by netconfig and I do not know what is the following question:
PCI BUS#
DEVICE#... (3 Replies)
Hi,
Im installing sco openserver 5 (OpenServer-5.0.7Hw-10Jun05_1800.iso) on a vmware server 1.0.4.
Installation is ok but on when x server is loading i just can login, mouse does not move and most of keyboard cases do not respond.
I choose usb mouse + french keyboard while installating, should i... (1 Reply)
hi
Howto install iperf on SCO OpenServer 5.0.7? (0 Replies)
Discussion started by: ccc
0 Replies
LEARN ABOUT DEBIAN
grub-install
GRUB-INSTALL(8) FSF GRUB-INSTALL(8)NAME
grub-install - install GRUB on your drive
SYNOPSIS
grub-install [OPTION] install_device
DESCRIPTION
Install GRUB on your drive.
-h, --help
print this message and exit
-v, --version
print the version information and exit
--root-directory=DIR
install GRUB images under the directory DIR instead of the root directory
--grub-shell=FILE
use FILE as the grub shell
--no-floppy
do not probe any floppy drive
--force-lba
force GRUB to use LBA mode even for a buggy BIOS
--recheck
probe a device map even if it already exists
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into the DIR/boot directory specfied by --root-directory, and uses the grub shell to install grub into the
boot sector.
REPORTING BUGS
Report bugs to <bug-grub@gnu.org>.
SEE ALSO grub(8), update-grub(8).
The full documentation for grub-install is maintained as a Texinfo manual in the grub-legacy-doc package. If the info and grub-install
programs are properly installed at your site, the command
info grub-install
should give you access to the complete manual.
grub-install (GNU GRUB 0.97) January 2013 GRUB-INSTALL(8)
09-23-2002
SCO openserver 5 install problem
it only lets me do a fresh install).....then i hit enter and this is what i get: