09-17-2002
mksysb to hot swap hard drive
AIX 4.3.3
I am investigating methods of creating system backups. One method I am investigating is installing a hot swap hard drive and creating a mksysb to that hard drive. Does anyone have any ideas on getting this accomplished? I am thinking that I need a mounted file system from the 2nd hard drive and then do a mksysb to a file on that mounted hard drive. If the first hard drive dies, and I install another one, can I then boot from CD, get the filesystem from the hot swap hard drive mounted and do a restore from the mksysb file? Is this feasible?
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have suns machine that holds two hard drives. I only used one. I tryed to make a lan network with my windows xp. When I tryed to restart the machine it wanted to a password. when before I just typed root to log in. So i edited the etc dir. big mistake. So now the machine will not read the hard... (2 Replies)
Discussion started by: victbla
2 Replies
2. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
3. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
4. AIX
Every 3 months we have to do backups (smitth mksysb/lsmksysb + tar) on at least 30 workstations. We have to carry around 2 external tape drives to connect to them. It is a pain to do because it takes at least 3 days to do (evening/night shift) and users sometimes complain that there desk is not put... (1 Reply)
Discussion started by: Browser_ice
1 Replies
5. SCO
Hello Unix World,
I've been having this issue for the longest time.
Here is my setup
OS: SCO OpenServer 6.0 with mp4, mp3
Server: Dell PowerEdge 840, 800, 2900
USB Stick: Patriot 16GB High Speed, and many other different brands.
Occasinaly while system is running and USB is pluged in the... (0 Replies)
Discussion started by: miles556
0 Replies
6. AIX
I have 2 LPARs running AIX 5.3. Both are on the same VLAN. One LPAR, which I'll call LPAR2, has a 4mm SCSI tape drive connected to it, while LPAR1 does not have a tape drive connected. I am able to take mksysb backups of LPAR2 to the tape drive since it's directly connected. However, I need to... (2 Replies)
Discussion started by: need2bageek
2 Replies
7. Hardware
Hey All,
Im using Fedora 2.6 (which is cannot be changed for compatibility reasons).
I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:"
Is there any way to bypass this process and still boot... (0 Replies)
Discussion started by: robfwauk
0 Replies
8. SCO
Our tape drive died and I installed a newer Quantum DAT72 drive in it's place with the same SCSI ID. It still works, but with one major flaw, the system will lock up if I try to upgrade BackupEDGE or view NFS settings in scoadmin.
I get a Transition to ready failure on ha=0* message when the... (4 Replies)
Discussion started by: psytropic
4 Replies
9. AIX
I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can... (5 Replies)
Discussion started by: mpeter05
5 Replies
LEARN ABOUT LINUX
mount_pcfs
mount_pcfs(1M) System Administration Commands mount_pcfs(1M)
NAME
mount_pcfs - mount pcfs file systems
SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point
mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point
DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If
mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted.
If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments,
including the FSType-specific_options; see mount(1M) for more details.
The special argument can be one of two special device file types:
o A floppy disk, such as /dev/diskette0 or /dev/diskette1.
o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file
for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are
/dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1.
The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table.
OPTIONS
generic_options
See mount(1M) for the list of supported options.
-o
Specify pcfs file system specific options. The following options are supported:
foldcase|nofoldcase
Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre-
vious behavior of pcfs. The default is nofoldcase.
FILES
/etc/mnttab table of mounted file systems
/etc/vfstab list of default parameters for each file system
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWesu |
+-----------------------------+-----------------------------+
SEE ALSO
mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS)
NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym-
bolic link refers, rather than on top of the symbolic link itself.
SunOS 5.10 24 Nov 2003 mount_pcfs(1M)