How to setup a PORT Post: 28011

9 More Discussions You Might Find Interesting

1. IP Networking

printer port setup

Does anybody know how to add a printer from network in Solaris 10 using IP settings? according to our IT support, in order to add this printer in Windows XP we introduce it as a local printer which is connected to a port with an IP address, like 128.79.44.110. Anyway I don't know how it can be done...

2. Solaris

URGENT - setup port and dump all output to /dev/null or a file

Please help urgently. I need to setup up some sort of service on a solaris server on a port. I dont need it do anything special, anything that is sent to this port from an external server should be dump to /dev/null or a flat file.. Can you help urgently?

3. AIX

NIM server setup on etherchannel setup environment

I know that IBM's official stance is that NIM does not work on etherchannel environment, but has anyone able to get around it? I'm working on a p5-590 LPAR system, and the NIM master and clients are all on the same frame. Any help is appreciated.

4. AIX

Console Setup for RS-232 port on 9131-52A

Hi, I have tried to setup the console on a Power5 9131-52A type IBM Server. On the back there are 2 RS-232 ports labeled T1 T2. I am going under the assuming that these are the serial ports (Normally the serial ports are S1 S0). When I finish assigning the console under smit, I get no response...

5. AIX

SMC multi port Printserver setup on AIX 6.1

Hi Guys, I have SMC 3 port print server would liek to create 3 queues for each port , please advice what port name or number should be used while creating the quues , I have hpjetdirect and I have tried raw1, raw2 and raw3 on it and it works but it doesnt work for SMC , please advice. ...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

9. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT DEBIAN

ibv_rc_pingpong

IBV_RC_PINGPONG(1)						   USER COMMANDS						IBV_RC_PINGPONG(1)

NAME

       ibv_rc_pingpong - simple InfiniBand RC transport test

SYNOPSIS

       ibv_rc_pingpong [-p port] [-d device] [-i ib port] [-s size] [-r rx depth] [-n iters] [-l sl] [-e] HOSTNAME

       ibv_rc_pingpong [-p port] [-d device] [-i ib port] [-s size] [-r rx depth] [-n iters] [-l sl] [-e]

DESCRIPTION

       Run a simple ping-pong test over InfiniBand via the reliable connected (RC) transport.

OPTIONS

       -p, --port=PORT
	      use TCP port PORT for initial synchronization (default 18515)

       -d, --ib-dev=DEVICE
	      use IB device DEVICE (default first device found)

       -i, --ib-port=PORT
	      use IB port PORT (default port 1)

       -s, --size=SIZE
	      ping-pong messages of size SIZE (default 4096)

       -r, --rx-depth=DEPTH
	      post DEPTH receives at a time (default 1000)

       -n, --iters=ITERS
	      perform ITERS message exchanges (default 1000)

       -l, --sl=SL
	      use SL as the service level value of the QP (default 0)

       -e, --events
	      sleep while waiting for work completion events (default is to poll for completions)

SEE ALSO

       ibv_uc_pingpong(1), ibv_ud_pingpong(1), ibv_srq_pingpong(1)

AUTHORS

       Roland Dreier
	      <rolandd@cisco.com>

BUGS

       The  network  synchronization between client and server instances is weak, and does not prevent incompatible options from being used on the
       two instances.  The method used for retrieving work completions is not strictly correct, and race conditions may  cause	failures  on  some
       systems.

libibverbs							  August 30, 2005						IBV_RC_PINGPONG(1)