Sponsored Content
Full Discussion: Linux or unix "IRQ"
Top Forums UNIX for Dummies Questions & Answers Linux or unix "IRQ" Post 261 by balla on Friday 17th of November 2000 01:19:23 PM
Old 11-17-2000
Network

hi
j have installed a Linux 6.2 on a computer server with 2 network card. Unfortunetely all the both card use the same IRQ 11 than only the first launched(used when the system is started) card run correctely the second don't work at all.
Please can you give me a way to change the IRQ for one of this card ?
Or if you have another tip please come on ?
thanks !!
 

We Also Found This Discussion For You

1. UNIX for Advanced & Expert Users

Commands on Digital Unix equivalent to for "top" and "sar" on other Unix flavour

Hi, We have a DEC Alpha 4100 Server with OSF1 Digital Unix 4.0. Can any one tell me, if there are any commands on this Unix which are equivalent to "top" and "sar" on HP-UX or Sun Solaris ? I am particularly interested in knowing the CPU Load, what process is running on which CPU, etc. ... (1 Reply)
Discussion started by: sameerdes
1 Replies
DAIC(4) 						   BSD Kernel Interfaces Manual 						   DAIC(4)

NAME
daic -- isdn4bsd driver for EICON.Diehl active ISDN cards SYNOPSIS
daic0 at isa? iomem 0xd8000 irq 10 DESCRIPTION
The daic driver supports the old Diehl active cards: S, SX, SXn, SCOM and QUADRO. For a QUADRO card, the driver will detect the board type and use all four ports, each attached as a controller of its own to the isdn4bsd system, which can be listed using the daicctl utility. The daic driver interfaces the ISDN card to the ISDN4BSD kernel subsystem. All lower layer ISDN control is handled by the card. This should allow you to run any national ISDN protocol delivered by EICON.Diehl for your card, but the driver has only been tested with the DSS1 proto- col and some parts of the cards interface are ISDN protocol dependent. The daic driver is written to conform to the software interface documented by Diehl in their ISDN-Karten Benutzerhandbuch from 1992. MICROCODE DOWNLOAD
Every active card needs its own operating software before it can work. You have to download this to the card before using it with isdn4bsd. Use the daicctl utility to do this, i.e. call daicctl -d te_etsi.sx 1 to download the file te_etsi.sx to controller number 1. Use daicctl -l to list all available controllers (and ports). You have to select the correct ISDN protocol file for your ISDN interface, see the Diehl docu- mentation for details. The cards bootstrap process involves another file, which is independent of the card type you use and the protocol you run. It is called download.bin in current versions of the Diehl software distribution and has to be copied to the kernel compile directory under dev/microcode/daic and converted into a header file used when compiling the kernel by running make in that directory. Your kernel compile will fail and remind you of this if you forget to do this. Due to copyright restrictions we cannot distribute the driver with this file inte- grated. But if you own a card, you do have the file (or can get it from the Diehl web server). SEE ALSO
daicctl(1) BUGS
The driver is not yet finished. BSD
January 30, 1998 BSD
All times are GMT -4. The time now is 12:53 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy