trying to set up an optical drive Post: 24932

7 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Magneto-Optical drive for SCO Openserver 5.0.5

Hi, I tried to install Magneto-Optical (MO) drive Fujutsu to COMPAQ Proliant ML350 with SCO Openserver 5.0.5. Harddisk and MO are connected to Adaptec UW-SCSI-3 (driver ad160). During boot process system shows me that MO is connected to host adapter 1, bus 0, SCSI ID 1 and LUN 0. But when I...

2. AIX

connect optical cable to HBA

Hi guys, I have not connected optical cable to the Dual port HBA before. My integrator used to do that for me all the time. Can someone explain to me how can I physically connect optical cable to the HBA port in P570. The optical cable has two connectors and right now the HBA port has just a...

3. UNIX for Dummies Questions & Answers

Making a copy of an Magneto Optical Disk

We are trying to make duplicates of some Magneto Optical Disks that were created in Irix 6.5. The disks are 2.3 gig and the using a scsi MOD drive. Is there possbily a disk copy like in dos or some simple script to do this - any help appreciated. Thanks

4. Red Hat

How to configure mini optical mouse ?

hello, someone gave me a set of electronic gadgets 'Brookstone' which has mini optical mouse. This mouse label doesn't have model or etc. Mouse does not work properly i.e. pointer is moving right but left/right buttons work opposite and not always could open or close controls. I suggest it might...

5. Solaris

Cannot recover OS hard drive from a set of snapshots

I have installed Solaris 11 Express on my computer and set up a script to make daily snapshots of all filesystems and send them to a backup disc. Now I'm trying to replace the system disc using a set of captured snapshots. I have found an article on that topic on the internet and have been...

6. AIX

Help with virtual optical device

Hi My P6 server is with dual vio servers. From the below output we could see that cd devices(cd0 and cd1) has been mapped to the vio client named prdsapfi1. When we execute "lsdev -Cc cdrom" in prdsapfi1 there are 2 cd devices named cd0 and cd1 showing up in available state. ...

7. Hardware

Dell XPS M1330 doesn't detect optical drive

I have a Dell XPS M1330 laptop. The OS is Windows 10. I had to replace the motherboard because it was bad. After replacing the motherboard I noticed the optical (DVD/CD) drive is neither detected in BIOS and OS nor making any noise at all. Everything else seems to be working fine. The optical drive...

LEARN ABOUT NETBSD

mcd

MCD(4)							   BSD Kernel Interfaces Manual 						    MCD(4)

NAME

     mcd -- Mitsumi CD-ROM driver

SYNOPSIS

     mcd0 at isa? port 0x300 irq 10
     options MCD_PROMISC

DESCRIPTION

     The mcd driver provides support for Mitsumi CD-ROM controller and drive on the isa(4) bus.

FILES

     /dev/cd[0-9][a-h]	  block mode Mitsumi CD-ROM devices
     /dev/rmcd[0-9][a-h]  raw mode Mitsumi CD-ROM devices

SEE ALSO

     intro(4), isa(4), ne(4), we(4)

BUGS

     The mcd hardware is  difficult to probe accurately.  Historically, the mcd probe would accept any return values as indicating that an mcd
     drive was present.  Other devices, particularly ne(4) or we(4), would then be incorrectly claimed by the mcd driver.  The driver now only
     accepts result codes known to indicate Mitsumi-compatible CD controllers, but may reject some mcd hardware which  returns other result codes.

     options MCD_PROMISC enables the  original promiscuous probe behaviour. Use with extreme caution.

BSD
								 November 29, 1994							       BSD

7 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Magneto-Optical drive for SCO Openserver 5.0.5

Discussion started by: yurist

2. AIX

connect optical cable to HBA

Discussion started by: solaix14

3. UNIX for Dummies Questions & Answers

Making a copy of an Magneto Optical Disk

Discussion started by: drew_holm

4. Red Hat

How to configure mini optical mouse ?

Discussion started by: susja