07-10-2002
snmp on linux
Which is the best link which answers following question:
What is use of snmp and
How do i set it up in linux
10 More Discussions You Might Find Interesting
1. Linux
Can anybody please tell me how to configure linux to receive snmp traps from a windows server? I am not able to receieve snmp traps on unix machines specifically linux and solaris. I have tried starting snmptrapd service on linux but it didn't work. Is there anything special that I have to do on... (2 Replies)
Discussion started by: iamtulipin
2 Replies
2. Linux
hello,
I use this command:
snmpwalk -c public -v2c zeus
Timeout: No Response from zeus
I then installed net-snmp on zeus. however, this has not changed the situation:
snmpwalk -c public -v2c zeus
Timeout: No Response from zeus
any idea please on how to make the linux server answers... (6 Replies)
Discussion started by: melanie_pfefer
6 Replies
3. IP Networking
I use snmp protocol on linux, now I have to use snmp on win, i use pc linux.
I have activated the service snmp on win but I can not question him on my linux pc, you have any suggestions? (1 Reply)
Discussion started by: fege
1 Replies
4. Infrastructure Monitoring
Hi all,
I'm after a linux utility that can relay all incoming traffic on a certain port to another server. Can anyone recommend a good program?
I've taken a look at snmptrapd, but it's not obvious how this can be configured for my requirements.
Many thanks. (1 Reply)
Discussion started by: badoshi
1 Replies
5. Infrastructure Monitoring
Hi,
Can anyone please provide the Open Source implmentation of the Following Protocols in Linux Operating Systems.
A. SNMP
B. TCP
C. WIMAX MAC layer protocol.
Thaniks
Saurav (2 Replies)
Discussion started by: sauravbh
2 Replies
6. Infrastructure Monitoring
I am trying to enabling SNMP access and trap forwarding for Linux(RHEL5) using following official url from IBM.
http://publib.boulder.ibm.com/infocenter/eserver/v1r2/index.jsp?topic=/diricinfo/fqm0_t_enabling_snmp_access_and_trap_forwarding_for_linux.html
In my system, snmp and snmplibs are... (1 Reply)
Discussion started by: SiddhV
1 Replies
7. Infrastructure Monitoring
Please could someone help - advise :
I am running linux on a HP server, and I have installed the HP SMNP agents to the server.
The snmpd process is running ok, I would like to send an snmp test message to the GMI server ( netcool ). Please could someone advise me the snmp command I can use.... (2 Replies)
Discussion started by: venhart
2 Replies
8. UNIX for Dummies Questions & Answers
i am working with embedded system -Dell DCS management sub system. my question is as below:
currently we are using linux kernel 2.6.30 build and we have a kernel logs stored to the /var/log/messages path. now we have to transfer all this logs to the specified SNMP target as a part of SNMP... (4 Replies)
Discussion started by: vipul_prajapati
4 Replies
9. UNIX for Beginners Questions & Answers
Hi all,
I am trying to install snmp on a Linux VM so I can use snmpwalk, snmpget etc.
On searching the forum I found two old posts from 2010/11. So I wanted to ask again if there are any updated instructions on how to install snmp.
On web I found a few instructions but they suggested using yum... (4 Replies)
Discussion started by: pat_pramod
4 Replies
10. Red Hat
hi
I get below error from console and message log in red hat linux
snmp Got trap from peer on fd 13 .
Any idea why there is error and how to fix it ??
Please use CODE tags as required by forum rules! (0 Replies)
Discussion started by: chuikingman
0 Replies
LEARN ABOUT REDHAT
snmp-ups
snmp-ups(8) Network UPS Tools (NUT) snmp-ups(8)
NAME
snmp-ups - Driver for RFC 1628 SNMP UPS equipment
NOTE
This man page only documents the hardware-specific features of the snmp-ups driver. For information about the core driver, see nutups-
drv(8).
SUPPORTED HARDWARE
Any UPS that is RFC 1628 (UPS MIB) compliant.
EXPERIMENTAL DRIVER
This driver has been tagged experimental and is not built by default.
REQUIREMENTS
This driver needs UCD SNMP, aka Net-SNMP installed to compile successfully. See http://www.net-snmp.org/ for more information.
On Red Hat 7.2, these packages are required:
ucd-snmp-devel-4.2.3-1, ucd-snmp-4.2.3-1, ucd-snmp-utils-4.2.3-1
You must install SNMP-UPS-MIB.txt in your MIBs directory - typically /usr/share/snmp/mibs/, but it may vary from system to system. You can
generate this from chapter 4 of RFC 1628 (see http://www.faqs.org).
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
community=name
Set community name (default = public)
snmp_version=version
Set SNMP version (default = v1, the other allowed value is v2c)
INSTALLATION
This driver is not built by default. You can build it by using "configure --with-drivers=snmp-ups" before calling make.
IMPLEMENTATION
The hostname of the UPS is specified with the "port" value in ups.conf, i.e.:
[snmp]
driver = snmp-ups
port = snmp-ups.example.com
community = public
snmp_version = v1
SUPPORTED VARIABLES
INFO_MFR UPS Manufacturer
INFO_MODEL UPS Model
INFO_FIRMREV Firmware/Software Version
INFO_STATUS OFF, OL, OB, BOOST, TRIM
INFO_BATTPCT Battery percentage
INFO_RUNTIME Predicted runtime on battery
INFO_BATTVOLT Battery Voltage
INFO_OUTVOLT Output Voltage
PLANNED SUPPORT
INFO_UTILITY Input Voltage
INFO_ACFREQ AC Frequency
INFO_UPSTEM UPS Temperature
INFO_LOADPCT Load Percentage
CMD_? Not determined
AUTHORS
Arnaud Quette, Hans Ekkehard Plesser
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Tue Oct 22 2002 snmp-ups(8)