network out Post: 2406

8 More Discussions You Might Find Interesting

1. Programming

Help in developing a Network Appliation to monitor pc in a network

I am developing a Network Appliation to monitor computers in a network. Specs are App monitors the current web page viewed in each system App also can shutdown the computer in the network App can show all process run by each computer in the network I am now confused how to start my...

2. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

3. UNIX for Advanced & Expert Users

Network Shell Script & Blade Logic & Network Security

I am going to take up a position in Data & Network Security. I would need to write network shell scripts doing the following task: Going to around 2000 servers and findout which groups has access to each servers and which ids are there in each group that has access. I need to implement...

4. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

5. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that.

6. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

7. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

8. IP Networking

I would like to monitor network traffic for a computer on my network

My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I...

LEARN ABOUT DEBIAN

wireless

WIRELESS(7)						     Linux Programmer's Manual						       WIRELESS(7)

NAME

       wireless - Wireless Tools and Wireless Extensions

SYNOPSIS

       iwconfig
       iwpriv -a

DESCRIPTION

       The  Wireless  Extensions  is  an API allowing you manipulate Wireless LAN networking interfaces.  It is composed of a variety of tools and
       configuration files. It is documented in more detail in the Linux Wireless LAN Howto.
       The Wireless Tools are used to change the configuration of wireless LAN networking interfaces on the fly, to get their  current	configura-
       tion, to get statistics and diagnose them. They are described in their own man page, see below for references.
       Wireless  configuration	is specific to each Linux distribution. This man page will contain in the future the configuration procedure for a
       few common distributions. For the time being, check the file DISTRIBUTIONS.txt included with the Wireless Tools package.

DEBIAN 3.0
       In Debian 3.0 (and later) you can configure wireless LAN networking devices using the network configuration tool ifupdown(8).

       File : /etc/network/interfaces

       Form : wireless-<function> <value>
	      wireless-essid Home
	      wireless-mode Ad-Hoc

       See also :
	      /etc/network/if-pre-up.d/wireless-tools
	      /usr/share/doc/wireless-tools/README.Debian

SuSE 8.0
       SuSE 8.0 (and later) has integrated wireless configuration in their network scripts.

       Tool : Yast2

       File : /etc/sysconfig/network/wireless
	      /etc/sysconfig/network/ifcfg-*

       Form : WIRELESS_<function>=<value>
	      WIRELESS_ESSID="Home"
	      WIRELESS_MODE=Ad-Hoc

       See also :
	      man ifup
	      info scpm

ORIGINAL PCMCIA SCRIPTS

       If you are using the original configuration scripts from the Pcmcia package, you can use this method.

       File : /etc/pcmcia/wireless.opts

       Form : *,*,*,*)
		  ESSID="Home"
		  MODE="Ad-Hoc"
		  ;;

       See also :
	      /etc/pcmcia/wireless
	      File PCMCIA.txt part of Wireless Tools package

AUTHOR

       Jean Tourrilhes - jt@hpl.hp.com
       http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/

SEE ALSO

       iwconfig(8), iwlist(8), iwspy(8), iwpriv(8), iwevent(8).

wireless-tools							   4 March 2004 						       WIRELESS(7)